ventwindowseal-Gchemist - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MidnightBlues · 12-11-2002, 08:28 PM

As I remember correctly you replaced the vent window seals a while ago??
I'm working on this now,and have a question:
The old seal was a 2 piece seal and had metal clips on the rear seal to attach it to the frame.The new one(oem) is a 1 piece seal without metal clips.
Am I supposed to glue the rear part to the frame??

J-Spec C10 · 12-11-2002, 11:30 PM

will the seals get rid of the whistling noise when I drive? if so, where are the seals available?

PHOENIX · 12-12-2002, 02:11 PM

I need to fix my seals too.

Yes J-Spec the truck should not have any whistling sound if everything is good.

TIP:
When ever having a window replaced by a perfessional. Always test his work. Take your truck for a ride with all the windows down, then with all the windows up. That way you can figure out if youll have any problems.

I had a wing window replaced and ever sense it has whistled. If you crack one of your larger windows it will stop the whistling. But now you have a window open. I guess you have to choose whats worse.

J-Spec C10 · 12-12-2002, 03:45 PM

its minus 10 celcius here, I'm not driving anywhere with my windows down!!

12-11-2002, 08:28 PM	#1
MidnightBlues Registered User Join Date: Oct 2002 Location: The Netherlands Posts: 118	ventwindowseal-Gchemist As I remember correctly you replaced the vent window seals a while ago?? I'm working on this now,and have a question: The old seal was a 2 piece seal and had metal clips on the rear seal to attach it to the frame.The new one(oem) is a 1 piece seal without metal clips. Am I supposed to glue the rear part to the frame?? __________________ Andre 1984 C10 SWB, 350/700R4

12-11-2002, 11:30 PM	#2
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	will the seals get rid of the whistling noise when I drive? if so, where are the seals available? __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

12-12-2002, 02:11 PM	#3
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	I need to fix my seals too. Yes J-Spec the truck should not have any whistling sound if everything is good. TIP: When ever having a window replaced by a perfessional. Always test his work. Take your truck for a ride with all the windows down, then with all the windows up. That way you can figure out if youll have any problems. I had a wing window replaced and ever sense it has whistled. If you crack one of your larger windows it will stop the whistling. But now you have a window open. I guess you have to choose whats worse. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

12-12-2002, 03:45 PM	#4
J-Spec C10 Whats this wire for?.... Join Date: Dec 2002 Location: Barrie, Ontario, CANADA Posts: 378	its minus 10 celcius here, I'm not driving anywhere with my windows down!! __________________ Kyle CANADIAN CONNECTION '82 C10 Resto-Custom--> * 2 1/4" manifold back dual exhaust with Hooker Aerochambers & High Flow Cats Taylor Ignition Wires Centerline 15" Telstars with 32"x10" mudders

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.