different headers that fit?

[bigarmzz]

i remember reading awhile back that headers from chevelles, or maybe camaros will fit our trucks (i think), has anyone actually used a set of these?

any ceramic coated part numbers that will "definitely" fit?

i'm lowering my truck right now, and the headman elites that are on it now, the flanges are going to be too low it looks like

[chevy2ss]

Id love to know too since ive seen a few great deal on big block camaro headers lately

[85Bowtie]

Same here.

I know Dynomax fit like crap, I switched to Hedman, they fit great.

I'd like ot get a set of Hooker's when I redo my truck next few months but I'm too cheap so I'm reusing the Hedman's.

[bigarmzz]

after searching for quite awhile, i think i found the post that answers our question

its here, thanks to Jared78, and included the part number

http://67-72chevytrucks.com/vboard/s...camaro+headers

[bigarmzz]

for some reason i cant edit my last post, so i guess i have to make another one

only prob is summit wants $346.95 for these, anyone know of any that cost less?

[maxreps]

The ones that fit these cars will...

Camaro 1967-81,
Chevelle. Malibu, El Camino 1964-87,
Chevy II, Nove 1968-79,
Passenger Car 1971-94,
Monte Carlo 1970-87


In Flowtech it's pn# 11108

[chappys4life]

Is there a cheaper alternative to the hedman 68606? Still looking at coated though. Maybe Jegs 30051? Just curious on others.

[bigarmzz]

Originally Posted by chappys4life

Is there a cheaper alternative to the hedman 68606? Still looking at coated though. Maybe Jegs 30051? Just curious on others.

i like the price on those from Jegs, just a shame there not shorties

[bigarmzz]

just found these shorty's that are ceramic coated for $319, dont sound bad, and they'll def fit our trucks

http://store.summitracing.com/partde...80+4294902386+

[Adams74Chevy]

Any custom exhaust shops in your area? Don't know how much they'd charge but you'd be able to get a pair that fit right.

[85Bowtie]

If you want good headers, then buy a good set.

Usually, the cheaper brands use thinner flanges where it mounts to the heads or they aren't uniformely flat and you'll end up getting leaks.

[Driveway Dreams]

Another option would be to get a set & get them ceramic coated. We have a few shops out here that will do it in an out for fairly reasonable. Something to look at anyway.

[OrangeAnimal]

I used some headers for a 88-98 chevy truck. It works ok. and they were cheap on ebay. They are "stainless" I wouldn't call them the best in the world but they do work.

The only issue I had was on the driver side. I had to trim alittle spot on the lower portion of the frame rail and move the shifter rod that goes from the column to the lever at the trans. Here is a link they were like this but I found them cheaper at the time.

http://cgi.ebay.com/ebaymotors/CHEVY...3A1|240%3A1318

I used these cause I wanted to keep things away from the ground as much as possible. There are some pics in my build thread. "OrangeAnimal"

[smashingchuck]

I'm running same jet-hot coated chevelle headers from eBay. $185 and they seem to fit pretty well, just need a tight bend right after the collector if you're laying frame. Here's a link to the exact ones I have on the 'bay:

http://cgi.ebay.com/ebaymotors/CAMAR...3A1|240%3A1318

[bigarmzz]

are you sure that these fit our trucks? get around the steering parts, cab, etc?...looks like you just have a rolling chassis there in the pic is why i ask

good find at that price for sure

Originally Posted by smashingchuck

I'm running same jet-hot coated chevelle headers from eBay. $185 and they seem to fit pretty well, just need a tight bend right after the collector if you're laying frame. Here's a link to the exact ones I have on the 'bay:

http://cgi.ebay.com/ebaymotors/CAMAR...3A1|240%3A1318

[smashingchuck]

Originally Posted by bigarmzz

are you sure that these fit our trucks? get around the steering parts, cab, etc?...looks like you just have a rolling chassis there in the pic is why i ask

good find at that price for sure

well, the steering is on the other side of the frame, so that won't be an issue. I haven't had the cab on since I put them on, but I don't see how they could possibly hit it.

[chevy2ss]

Anyone running any big block headers from other models?

[blazer2007]

I,m running hedman 3/4 chevelle on my big block,easy install ,fell right in plus they have a ball shaped flange at the end so is easy to make exhaust,gives you some room for error

[chevy2ss]

4 wheel drive?

[monique111]

I used 76 camaro headers on my 76 K-20, fits greats and haven't had any sort of issue with them yet.

[AirMale]

hooker makes full length chevelle headers that are perfect. I ordered a set in stainless for $500. Here is what the ceramic looks like. Didn't get the stainless set on yet but they are the same part number, just stainless!

[Alex1]

Originally Posted by AirMale

hooker makes full length chevelle headers that are perfect. I ordered a set in stainless for $500. Here is what the ceramic looks like. Didn't get the stainless set on yet but they are the same part number, just stainless!

Would be nice to find a set of 2 1/8 that fit for the high HP guys to run.

[gchemist]

Checkout my webshots page. I have 3/4 length Chevelle headers on my truck. The headers are great for lowered trucks.

[bigarmzz]

bumpin this up, lots of good info

[STOCKISH]

You know Bigarmzz, these headers wont fit anymore once we talk you into the LSX swap that you KNOW you want to do.