Distributor Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1SIK69 · 04-10-2009, 02:46 PM

My dad has a 59 Apache. It has a straight 6. He is wanting to convert the distributor to HEI. is there a certain year model he can get to swap it out and what all is involved? Thanks.

**mr48chev** · 04-10-2009, 02:54 PM

I'm pretty sure that he will have to look for an aftermarket HEI or other electronic distributor or conversion kit.

I have a friend who modified Hei distributors to fit where they didn't belong before the aftermarket ones came out so it might be possible to modifiy one off a 250 or 292 to fit and work. That might take several hours of machine shop time though.

**mr48chev** · 04-10-2009, 03:16 PM

I did a bit of snooping and it seems that Drummin89 has modified an Hei for his 235 http://67-72chevytrucks.com/vboard/s...d.php?t=337554

Maybe he will chime in and give an idea of what is involved.

Fred T · 04-12-2009, 05:39 PM

Modification of an HEI distributor from the newer six is fairly easy. You need to remove the mounting flange and make a mounting clamp similar the the mount on your 235. The end of the shaft needs to be cut about 3/8" shorter and reprofiled similar to the older. Engagement with the oil pump and cam is critical. All of these distributors have the large cap, which looks out of place on the older engine.

Another option is a converted distributor from a carbureted 2.8 V6. These are available from www.stoveboltengineco.com. You get the small cap with this.

A third option is a Pertronix conversion. It replaces the points in your distributor. If your distributor shaft is still tight, it is an easy conversion.

04-10-2009, 02:46 PM	#1
1SIK69 Registered User Join Date: Feb 2009 Location: Killeen, TX Posts: 55	Distributor Question My dad has a 59 Apache. It has a straight 6. He is wanting to convert the distributor to HEI. is there a certain year model he can get to swap it out and what all is involved? Thanks.

04-10-2009, 02:54 PM	#2
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Distributor Question I'm pretty sure that he will have to look for an aftermarket HEI or other electronic distributor or conversion kit. I have a friend who modified Hei distributors to fit where they didn't belong before the aftermarket ones came out so it might be possible to modifiy one off a 250 or 292 to fit and work. That might take several hours of machine shop time though.

04-10-2009, 03:16 PM	#3
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,711	Re: Distributor Question I did a bit of snooping and it seems that Drummin89 has modified an Hei for his 235 http://67-72chevytrucks.com/vboard/s...d.php?t=337554 Maybe he will chime in and give an idea of what is involved.

04-12-2009, 05:39 PM	#4
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Distributor Question Modification of an HEI distributor from the newer six is fairly easy. You need to remove the mounting flange and make a mounting clamp similar the the mount on your 235. The end of the shaft needs to be cut about 3/8" shorter and reprofiled similar to the older. Engagement with the oil pump and cam is critical. All of these distributors have the large cap, which looks out of place on the older engine. Another option is a converted distributor from a carbureted 2.8 V6. These are available from www.stoveboltengineco.com. You get the small cap with this. A third option is a Pertronix conversion. It replaces the points in your distributor. If your distributor shaft is still tight, it is an easy conversion. __________________ Fred There is no such thing as too much cam...just not enough engine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.