air lift - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastcam1 · 04-16-2009, 08:53 PM

has anyone or is anyone currently running air lift bags i wanna know how they compare to some of the other brands out on the market thanks

Twisted Minis · 04-16-2009, 09:40 PM

Their new Dominators seem to have a good reputation so far. A lot better than their old ones with a hose clamp... I'm still a Contitech guy though...

mycool72 · 04-17-2009, 11:38 AM

I have the dominators and love them so far but they haven't seen any road time. They are a good, quality bag.

87 dually burb · 04-17-2009, 09:36 PM

I'm running the d2600's in front and love them smooth ride and only 60 psi at ride height with a 3" drop spindle

fastcam1 · 04-29-2009, 08:00 PM

so i just got a set of d2600's for the front and am wondering where i can pick up the hardware to mount them to the plates and arms because they didnt seem to come with any. any help?

gringoloco · 04-29-2009, 10:04 PM

3/8-16 grade 8 hardware. 5/8 - 7/8" thread insertion.

fastcam1 · 04-29-2009, 10:52 PM

Quote:

Originally Posted by gringoloco

3/8-16 grade 8 hardware. 5/8 - 7/8" thread insertion.

do you know where i could buy them?

mycool72 · 04-30-2009, 02:34 PM

home depot

joe231 · 04-30-2009, 04:53 PM

ACE hardware, tractor supply, or probably any local hardware store also

fastcam1 · 04-30-2009, 11:26 PM

cool thanks!

fastcam1 · 05-06-2009, 07:51 PM

anyone with these bags did you use all three holes on bottom or just the center?

mycool72 · 05-07-2009, 09:20 AM

center only

fastcam1 · 05-07-2009, 08:59 PM

Quote:

Originally Posted by mycool72

center only

cool thanks!

ENHANCED AIR RIDE · 05-13-2009, 09:51 PM

We have been putting the new Dominators on everything with ZERO problems!!!

fastcam1 · 05-14-2009, 07:50 PM

lookin for an inlfation kit with no luck. anyone with the d2600's where did you get your hoses,vavles,fittings,etc?

ENHANCED AIR RIDE · 05-14-2009, 07:57 PM

What all are you looking for? We carry a complete line of PTC and DOT line and fittings. We also carry most air management parts in stock, ie tanks, valves, compressors, etc.

fastcam1 · 05-14-2009, 08:12 PM

just somethin simple to get the bags inflated for a roller unless i can find a good deal on a whole setup

mycool72 · 05-16-2009, 08:19 PM

If you just want it rollin, go to your autoparts store and pick up some tank valves and then go to your hardware store and get some reducers that go from your bag size to your tank valve size....air em up like your tires! Thats what I did until i plumbed it all up.

04-16-2009, 08:53 PM	#1
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	air lift has anyone or is anyone currently running air lift bags i wanna know how they compare to some of the other brands out on the market thanks

04-16-2009, 09:40 PM	#2
Twisted Minis Registered User Join Date: Nov 2008 Location: Windsor, CA Posts: 500	Re: air lift Their new Dominators seem to have a good reputation so far. A lot better than their old ones with a hose clamp... I'm still a Contitech guy though... __________________ If you can find it cheaper, I can fix it!

04-17-2009, 11:38 AM	#3
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: air lift I have the dominators and love them so far but they haven't seen any road time. They are a good, quality bag.

04-17-2009, 09:36 PM	#4
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: air lift I'm running the d2600's in front and love them smooth ride and only 60 psi at ride height with a 3" drop spindle __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

04-29-2009, 08:00 PM	#5
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: air lift so i just got a set of d2600's for the front and am wondering where i can pick up the hardware to mount them to the plates and arms because they didnt seem to come with any. any help?

04-29-2009, 10:04 PM	#6
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: air lift 3/8-16 grade 8 hardware. 5/8 - 7/8" thread insertion. __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-30-2009, 02:34 PM	#8
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: air lift home depot

04-30-2009, 04:53 PM	#9
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: air lift ACE hardware, tractor supply, or probably any local hardware store also __________________ *CHEVY ONLY*

04-30-2009, 11:26 PM	#10
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: air lift cool thanks!

05-06-2009, 07:51 PM	#11
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: air lift anyone with these bags did you use all three holes on bottom or just the center?

05-07-2009, 09:20 AM	#12
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: air lift center only

05-13-2009, 09:51 PM	#14
ENHANCED AIR RIDE Registered User Join Date: Oct 2008 Location: Largo, Florida Posts: 158	Re: air lift We have been putting the new Dominators on everything with ZERO problems!!!

05-14-2009, 07:50 PM	#15
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: air lift lookin for an inlfation kit with no luck. anyone with the d2600's where did you get your hoses,vavles,fittings,etc? __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks

05-14-2009, 07:57 PM	#16
ENHANCED AIR RIDE Registered User Join Date: Oct 2008 Location: Largo, Florida Posts: 158	Re: air lift What all are you looking for? We carry a complete line of PTC and DOT line and fittings. We also carry most air management parts in stock, ie tanks, valves, compressors, etc.

05-14-2009, 08:12 PM	#17
fastcam1 Young gun Join Date: Feb 2009 Location: Spanaway WA Posts: 631	Re: air lift just somethin simple to get the bags inflated for a roller unless i can find a good deal on a whole setup __________________ 67 SWB Custom "JANE" http://67-72chevytrucks.com/vboard/s...d.php?t=554024 Northwest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ Cameron sparks



Register or Log In To remove these advertisements.

05-16-2009, 08:19 PM	#18
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: air lift If you just want it rollin, go to your autoparts store and pick up some tank valves and then go to your hardware store and get some reducers that go from your bag size to your tank valve size....air em up like your tires! Thats what I did until i plumbed it all up.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.