Pro-Filer Cylinder Heads - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sinister · 04-29-2009, 02:02 PM

Have you guys ever heard of Pro-Filer heads? I discovered them on another message board. Supposedly their big block heads are popular with people who race, any truth to this?
http://www.profilerperformance.com/index.html

Alex1 · 04-29-2009, 03:53 PM

Yep, good stuff.

Sinister · 04-29-2009, 04:39 PM

Cool. They just came out with SBC heads. Looks like they flow pretty decent and the price ain't bad.

kwhite4 · 04-30-2009, 02:35 PM

I have these on my 565 BBC and it makes over 1000 ponies, No issues so far , thing pulls like crazy...

Desert1957 · 05-13-2009, 05:45 PM

Hey,
I sure have heard of them, through my engine guy Bill Cannon at "Awesome Engines" in Delaware. I was all set to buy a set of "AFR" 227 heads until he told me about these, sure is tempting and at 1/2 the cost . I will let you know how they work out.
here is what they are going on...

PS: I'm not sure what you are putting these heads on but the only ones they make are way TOO Big for most small cubic inch street motors , check the intake port volume , there huge!

Desert

04-29-2009, 02:02 PM	#1
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Pro-Filer Cylinder Heads Have you guys ever heard of Pro-Filer heads? I discovered them on another message board. Supposedly their big block heads are popular with people who race, any truth to this? http://www.profilerperformance.com/index.html __________________ Beat it to fit, Paint it to match... Last edited by Sinister; 04-29-2009 at 02:03 PM.

04-29-2009, 03:53 PM	#2
Alex1 Registered User Join Date: Jul 2007 Location: Ottawa Ontario Canada Posts: 1,156	Re: Pro-Filer Cylinder Heads Yep, good stuff.

04-29-2009, 04:39 PM	#3
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: Pro-Filer Cylinder Heads Cool. They just came out with SBC heads. Looks like they flow pretty decent and the price ain't bad. __________________ Beat it to fit, Paint it to match...

04-30-2009, 02:35 PM	#4
kwhite4 Junior Member Join Date: Oct 2004 Location: Gatesville texas Posts: 180	Re: Pro-Filer Cylinder Heads I have these on my 565 BBC and it makes over 1000 ponies, No issues so far , thing pulls like crazy... __________________ 68 GMC 565 BBC Abruzzi super pro glide 9.85@135.00 Last edited by kwhite4; 04-30-2009 at 02:35 PM. Reason: spelling

05-13-2009, 05:45 PM	#5
Desert1957 Registered User Join Date: Apr 2009 Location: New Freedom Pa. Posts: 1,335	Re: Pro-Filer Cylinder Heads Hey, I sure have heard of them, through my engine guy Bill Cannon at "Awesome Engines" in Delaware. I was all set to buy a set of "AFR" 227 heads until he told me about these, sure is tempting and at 1/2 the cost . I will let you know how they work out. here is what they are going on... PS: I'm not sure what you are putting these heads on but the only ones they make are way TOO Big for most small cubic inch street motors , check the intake port volume , there huge! Desert

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.