Complete 250 6 Cylinder Engine - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Field and Son · 07-08-2009, 03:36 PM

I have a complete engine as shown. Was running when last pulled from a late 60's chevy truck according to the P.O. Would like to sell complete for $250 but will part out if no interest complete. Located in Fond du Lac, Wisconsin and I prefer to have pickup here, but would work with you if needed shipped.

Cyclone44 · 07-08-2009, 06:49 PM

In line for the power steering brackets and dist. and the carb....If you part it out....

jsmithbm · 07-08-2009, 07:09 PM

2nd on the p/s bracket.... This is going to be like playing the LOTO. Hope he parts it, then hope you change your mind on the bracket. Either or, the pic does me A LOT of help with how the p/s pump mounts and gives me something to show the fab. man if i can not find one soon.

Field and Son · 07-08-2009, 10:17 PM

I will price out individually if no takers by Thursday evening. Preference will be given in order of asking...Thanks, Jay

**paul mora** · 07-09-2009, 09:19 AM

I would like to buy the carb shipped to 92648

ChaStur · 07-09-2009, 03:32 PM

How far are you from Duluth? I only need the last 4" or so rod that connects carb to linkage and possibly a 3spd flywheel cover if you have one handy.

Thanks
Chad

C20-67_N_MO · 07-13-2009, 09:20 AM

How much for the power steering backet to 63049?

Thanks.

Field and Son · 07-13-2009, 09:59 AM

Sorry, the power steering bracket has already been sold.

69ShortStep · 07-17-2009, 06:23 AM

Has the exhaust manifold been removed? If so, how are all of the studs? Can you post some more pics of it after being removed?

Thanks

Field and Son · 07-17-2009, 08:30 AM

Quote:

Originally Posted by 69ShortStep

Has the exhaust manifold been removed? If so, how are all of the studs? Can you post some more pics of it after being removed?

Thanks

I will take off today and post some pictures for you...Jay I am going to leave intake and exhaust together unless I have a sale of one or the other. It was suggested that they should be sold together but I will still split, I just do not want to take apart unless one is sold.

Field and Son · 07-17-2009, 10:38 AM

Here are pics of the manifolds. All came off and all is good. From a southwest truck so bolts and studs came right off. I will seperate intake and exhaust for $45 each delivered or $75 for the complete setup delivered. Post here if you want it..Jay

jsmithbm · 07-17-2009, 10:59 AM

Did you ever sell the Carb to Cyclone? If not i may need to get that. My fuel inlet is stript on mine but i may be able to fix it with the helicoils. Thanks

69ShortStep · 07-23-2009, 12:44 PM

I will take both manifolds for $75 shipped. Please let me know what form of payment works for you.

69ShortStep · 07-31-2009, 01:08 PM

Do you have a tracking number for the manifolds?

Wood Booger · 09-16-2009, 06:06 PM

do you still have any parts off this engine? I need the bridge washers that hold the manifolds on.

**paul mora** · 07-09-2009, 10:59 PM

I am the one that wants the carb with the linkage so I hook up easily in my truck. Send me a PM so we can finalize and Paypal

Field and Son · 07-10-2009, 03:26 AM

Paul,

PM sent with payment info for carb.

jsmithbm · 07-10-2009, 06:07 PM

Thanks Cyclone, F&S can i get the crank pulley too? Zip code for the shipping is 31904? THanks

Field and Son · 07-10-2009, 06:56 PM

PM sent to jsmithbm

Field and Son · 07-13-2009, 08:01 AM

Payment received from Paul Mora and jsmithbm Thanks, parts will ship on Tuesday.

07-08-2009, 03:36 PM	#1
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Complete 250 6 Cylinder Engine I have a complete engine as shown. Was running when last pulled from a late 60's chevy truck according to the P.O. Would like to sell complete for $250 but will part out if no interest complete. Located in Fond du Lac, Wisconsin and I prefer to have pickup here, but would work with you if needed shipped. Attached Images

07-08-2009, 06:49 PM	#2
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Complete 250 6 Cylinder Engine In line for the power steering brackets and dist. and the carb....If you part it out....

07-08-2009, 07:09 PM	#3
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Complete 250 6 Cylinder Engine 2nd on the p/s bracket.... This is going to be like playing the LOTO. Hope he parts it, then hope you change your mind on the bracket. Either or, the pic does me A LOT of help with how the p/s pump mounts and gives me something to show the fab. man if i can not find one soon. __________________ Learning as I go! -------------------------------------

07-08-2009, 10:17 PM	#4
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete 250 6 Cylinder Engine I will price out individually if no takers by Thursday evening. Preference will be given in order of asking...Thanks, Jay

07-09-2009, 09:19 AM	#5
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: Complete 250 6 Cylinder Engine I would like to buy the carb shipped to 92648

07-09-2009, 03:32 PM	#6
ChaStur Registered User Join Date: Sep 2008 Location: Duluth, MN Posts: 111	Re: Complete 250 6 Cylinder Engine How far are you from Duluth? I only need the last 4" or so rod that connects carb to linkage and possibly a 3spd flywheel cover if you have one handy. Thanks Chad

07-13-2009, 09:20 AM	#7
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: Complete 250 6 Cylinder Engine How much for the power steering backet to 63049? Thanks. __________________ Coming Soon: Project 1970 Country Truck

07-13-2009, 09:59 AM	#8
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete 250 6 Cylinder Engine Sorry, the power steering bracket has already been sold.

07-17-2009, 06:23 AM	#9
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	Re: Complete 250 6 Cylinder Engine Has the exhaust manifold been removed? If so, how are all of the studs? Can you post some more pics of it after being removed? Thanks

07-17-2009, 10:38 AM	#11
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete 250 6 Cylinder Engine Here are pics of the manifolds. All came off and all is good. From a southwest truck so bolts and studs came right off. I will seperate intake and exhaust for $45 each delivered or $75 for the complete setup delivered. Post here if you want it..Jay Attached Images

07-17-2009, 10:59 AM	#12
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Complete 250 6 Cylinder Engine Did you ever sell the Carb to Cyclone? If not i may need to get that. My fuel inlet is stript on mine but i may be able to fix it with the helicoils. Thanks __________________ Learning as I go! -------------------------------------

07-23-2009, 12:44 PM	#13
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	Re: Complete 250 6 Cylinder Engine I will take both manifolds for $75 shipped. Please let me know what form of payment works for you.

07-31-2009, 01:08 PM	#14
69ShortStep Registered User Join Date: Jan 2004 Location: Canal Winchester, OH Posts: 143	Re: Complete 250 6 Cylinder Engine Do you have a tracking number for the manifolds?

09-16-2009, 06:06 PM	#15
Wood Booger Only a long story if I tell it Join Date: Apr 2009 Location: Atascadero, CA Posts: 93	Re: Complete 250 6 Cylinder Engine do you still have any parts off this engine? I need the bridge washers that hold the manifolds on. __________________ NO MONEY, LOTS OF WORK, LOVE THE TRUCK! EMERGENCY CONTACT LIST, see below: http://67-72chevytrucks.com/vboard/s...d.php?t=211430

07-09-2009, 10:59 PM	#16
paul mora Senior Member Join Date: Jan 2009 Location: huntington beach california Posts: 976	Re: Complete 250 6 Cylinder Engine I am the one that wants the carb with the linkage so I hook up easily in my truck. Send me a PM so we can finalize and Paypal



Register or Log In To remove these advertisements.

07-10-2009, 03:26 AM	#17
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete 250 6 Cylinder Engine Paul, PM sent with payment info for carb.

07-10-2009, 06:07 PM	#18
jsmithbm Registered User Join Date: Jun 2009 Location: Newnan, GA Posts: 485	Re: Complete 250 6 Cylinder Engine Thanks Cyclone, F&S can i get the crank pulley too? Zip code for the shipping is 31904? THanks __________________ Learning as I go! -------------------------------------

07-10-2009, 06:56 PM	#19
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete 250 6 Cylinder Engine PM sent to jsmithbm

07-13-2009, 08:01 AM	#20
Field and Son Registered User Join Date: Nov 2008 Location: Fond du Lac, Wisconsin Posts: 425	Re: Complete 250 6 Cylinder Engine Payment received from Paul Mora and jsmithbm Thanks, parts will ship on Tuesday.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.