aftermarket tilt colum - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckincurt · 07-23-2009, 10:22 PM

hi i got a 1978 and i put a 700r4 in it a 4 speed trans ... was wonderin if anyone knew where i could get a aftermarket sterring colum that would have (P.R.N.D.3.2.1) and mabey chrome lol thanks for your help

kevinr1970 · 07-24-2009, 12:03 AM

The PRND321 is part of the dash. I *think* that if your existing column goes through the entire range than all you need is the part of the dash with the indicator.
I *think*?

flamingbig10 · 07-24-2009, 12:07 AM

the indicator mounts to the gauge cluster

3r!c84 · 07-24-2009, 01:26 AM

The PRND321 is part of the dash.
and the colum shifter has a string that runs to the shifter indicater so just change out the number plate and youll be
good

smashingchuck · 07-24-2009, 02:00 AM

I'm sure Ididit or Flaming River would have what you're looking for. Just black out the one in the dash.

http://www.summitracing.com/parts/IDT-1520690020/

http://www.summitracing.com/parts/FLA-FR20022PL/

http://www.summitracing.com/parts/IDT-2600050010/

79gmcc15 · 07-24-2009, 02:09 AM

here ya go!
http://67-72chevytrucks.com/vboard/s...ight=indicator

truckincurt · 07-24-2009, 11:20 AM

thanks smashingchuck ididit is perfect thanks alot

smashingchuck · 07-24-2009, 11:33 AM

Quote:

Originally Posted by truckincurt

thanks smashingchuck ididit is perfect thanks alot

I think I would just call them directly and tell them what you have and what you want to do. They should be able to set you right up with a drop in unit. Their web site is:

www.ididit.com

3r!c84 · 07-24-2009, 01:21 PM

thats the same kind of colum as a 72 c10

07-23-2009, 10:22 PM	#1
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	aftermarket tilt colum hi i got a 1978 and i put a 700r4 in it a 4 speed trans ... was wonderin if anyone knew where i could get a aftermarket sterring colum that would have (P.R.N.D.3.2.1) and mabey chrome lol thanks for your help __________________ diy or die

07-24-2009, 12:03 AM	#2
kevinr1970 Senior Member Join Date: Aug 2004 Location: Everett, WA Posts: 2,316	Re: aftermarket tilt colum The PRND321 is part of the dash. I think that if your existing column goes through the entire range than all you need is the part of the dash with the indicator. I think? __________________ 2009 Honda Fit CfC (bsf 44.9 mpg) 2000 Tahoe Limited 1991 GMC CrewCab Dually 2wd, will end up swb, not dually and replace CCswb below 1991 GMC CrewCab Dually 4x4, just going to fix things up for now 1982/1989 K5/GMC Jimmy 2wd 1987 GMC 1/2 ton swb 2wd Crew (sold)

07-24-2009, 12:07 AM	#3
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: aftermarket tilt colum the indicator mounts to the gauge cluster __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

07-24-2009, 01:26 AM	#4
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: aftermarket tilt colum The PRND321 is part of the dash. and the colum shifter has a string that runs to the shifter indicater so just change out the number plate and youll be good __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

07-24-2009, 02:00 AM	#5
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: aftermarket tilt colum I'm sure Ididit or Flaming River would have what you're looking for. Just black out the one in the dash. http://www.summitracing.com/parts/IDT-1520690020/ http://www.summitracing.com/parts/FLA-FR20022PL/ http://www.summitracing.com/parts/IDT-2600050010/ __________________ 78 Build Thread 4Runner Build Last edited by smashingchuck; 07-24-2009 at 02:02 AM.

07-24-2009, 02:09 AM	#6
79gmcc15 Gettin It One Pice At A Time Join Date: Oct 2004 Location: everett, washington Posts: 2,688	Re: aftermarket tilt colum here ya go! http://67-72chevytrucks.com/vboard/s...ight=indicator __________________ RIP ELJAY Work In Progress 1979 GMC C1500 Trailering Special. Getting the truck done, one piece at a time. “You can tell a lot about a fellow’s character by his way of eating jellybeans.”Ronald Reagan “I don’t know the key to success but I know the key to failure is trying to please everybody.” Bill Cosby

07-24-2009, 11:20 AM	#7
truckincurt Registered User Join Date: Mar 2008 Location: Lockport, NY Posts: 106	Re: aftermarket tilt colum thanks smashingchuck ididit is perfect thanks alot __________________ diy or die

07-24-2009, 01:21 PM	#9
3r!c84 Badass Join Date: Jan 2009 Location: lox. fl Posts: 4,586	Re: aftermarket tilt colum thats the same kind of colum as a 72 c10 __________________ Think outside the box? -84c10 (1stcar)→My Build← -00 Saturn 5spd drop a gear and disappear! 1/4:13:90

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.