Best way to Lower a suburban? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*BGRAFX* · 08-06-2009, 01:40 PM

Hey guys, I'm looking for best opinions and pictures on lowered (non airbagged slammed) suburbans. would like to go lower then the 2/2 that LMC offers. I have a 91 2wd 1500.

thanks in advance for your posts

tvblazer78 · 08-06-2009, 05:05 PM

Here is one place to look DJM. 2" shackles and 2" springs.
http://www.djmsuspension.com/product...c%20table.html

Can anyone help out on what you did on your?

*BGRAFX* · 08-06-2009, 05:28 PM

I know where to buy lowering components, I'm just looking for some advice maybe from the blazer guys. Why is a 2/2 drop my only option. Can I do a 3/5. Withought any issues?

flamingbig10 · 08-06-2009, 07:13 PM

here's a few

[/QUOTE]

flamingbig10 · 08-06-2009, 07:17 PM

tvblazer78 · 08-06-2009, 08:17 PM

If you did a flip kit you would get about 6" out of that. But you can do the 2" and take 2 leafs out. I don't think they make lowering leafs for burbs that year.

Can anyone tell us what they did?

*BGRAFX* · 08-06-2009, 09:40 PM

Thanks for the pictures and replys. The first pic you uploaded above used a cut coil spring from an 04silverado. There aren't too many suburbans so thats why i figure the blazer guys can help. I will keep searching.

87 dually burb · 08-06-2009, 09:52 PM

you can 4" drop hanger in the rear
3" bell tech spindles with 2" springs
them pull a leaf or 2 if not level

*BGRAFX* · 08-06-2009, 10:38 PM

Thanks duallyburb, your suburban is coming together nicely. How well does it drive?

justpball · 08-19-2009, 05:04 PM

Quote:

Originally Posted by BGRAFX

Thanks for the pictures and replys. The first pic you uploaded above used a cut coil spring from an 04silverado. There aren't too many suburbans so thats why i figure the blazer guys can help. I will keep searching.

yep thats mine like they said i cut some 04 coils cut 1 coil and took 2 leafs out of the back.

Square84 · 08-15-2009, 02:14 AM

the back is 2" belltech drop shackles and the front is 1 full coil cut off the springs

08-06-2009, 01:40 PM	#1
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Best way to Lower a suburban? Hey guys, I'm looking for best opinions and pictures on lowered (non airbagged slammed) suburbans. would like to go lower then the 2/2 that LMC offers. I have a 91 2wd 1500. thanks in advance for your posts

08-06-2009, 05:05 PM	#2
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Best way to Lower a suburban? Here is one place to look DJM. 2" shackles and 2" springs. http://www.djmsuspension.com/product...c%20table.html Can anyone help out on what you did on your? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

08-06-2009, 05:28 PM	#3
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Best way to Lower a suburban? I know where to buy lowering components, I'm just looking for some advice maybe from the blazer guys. Why is a 2/2 drop my only option. Can I do a 3/5. Withought any issues?

08-06-2009, 07:13 PM	#4
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Best way to Lower a suburban? here's a few [/QUOTE] __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

08-06-2009, 07:17 PM	#5
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Best way to Lower a suburban? __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326 Last edited by flamingbig10; 08-06-2009 at 07:18 PM.

08-06-2009, 08:17 PM	#6
tvblazer78 Low & Fast! Join Date: Jan 2007 Location: Knoxville, TN Posts: 3,110	Re: Best way to Lower a suburban? If you did a flip kit you would get about 6" out of that. But you can do the 2" and take 2 leafs out. I don't think they make lowering leafs for burbs that year. Can anyone tell us what they did? __________________ Southeastern Mini Truckin' Nationals April 27 and 28, 2012

08-06-2009, 09:40 PM	#7
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Best way to Lower a suburban? Thanks for the pictures and replys. The first pic you uploaded above used a cut coil spring from an 04silverado. There aren't too many suburbans so thats why i figure the blazer guys can help. I will keep searching.

08-06-2009, 09:52 PM	#8
87 dually burb my short bus Join Date: Mar 2008 Location: fredericksburg,Va Posts: 307	Re: Best way to Lower a suburban? you can 4" drop hanger in the rear 3" bell tech spindles with 2" springs them pull a leaf or 2 if not level __________________ 90 burbbagged,shaved(about done)***** 91 burbstock worker for now************ *****only squares for me****************

08-06-2009, 10:38 PM	#9
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: Best way to Lower a suburban? Thanks duallyburb, your suburban is coming together nicely. How well does it drive?

08-15-2009, 02:14 AM	#11
Square84 I don't think these pills work Join Date: Apr 2008 Location: burkburnett,Tx Posts: 626	Re: Best way to Lower a suburban? the back is 2" belltech drop shackles and the front is 1 full coil cut off the springs Attached Images __________________ SQUARE84 90 SUBURBAN

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.