|
|
|
08-19-2009, 05:04 PM
|
#1 |
|
Registered User
Join Date: Apr 2009
Location: trenton, ohio
Posts: 8
|
temp gauge
i am trying to hook up a factory temprature gauge. right now i have an after market gauge that shows the temp in degree's. my question is this, what do i need to do to change it over ? i know i need to run a wire to the gauge but what do i put into the block to send the signal?
|
|
|
|
08-19-2009, 05:07 PM
|
#2 |
|
Check The Champ, Demonstrator
 
Join Date: Jun 2009
Location: Montreal,Quebec
Posts: 6,627
|
Re: temp gauge
Stock temperature sending unit. It will have a single flat pole sticking out of it. The wire will run up to the stock gauge or idiot light.
__________________
1963 Chevrolet Truck Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original Chevrolet Truck Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 |
|
|
|
|
08-19-2009, 06:10 PM
|
#3 |
|
Registered User
Join Date: Apr 2009
Location: trenton, ohio
Posts: 8
|
Re: temp gauge
i am starting to see my problem now, someone has cut the wire off going to the stock sensor.( along with a few others) i guess it's time for a new wiring harness.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
