64 2 door burb. Parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 08-21-2009, 04:41 PM

Hi guys, first off, i am a 67-72 guy but i like them all. Here is my questions: i found a 64 2 door gmc that is going to the crusher rather quickly. It is quite rusty but looks to have some good parts yet. GMC v-6 with a 2 speed auto, york A/C, power brakes, and power steering. The rig is very complete with a clam shell door on the back. I should have brought my camera...If i were to buy some of these parts, what is the demand and value of them? And what else should i grab? Any advice would be helpful. Thanks, Eric

jonzcustomshop · 08-21-2009, 05:36 PM

the latches for the sliding rear windows if it has 'em, and the arms that keeps the rear hatch open, if they are not broken.
ths are probably the most valuable parts from a sub

the turn signal lights from the hood, and the rear taillights and housings if they are good.

big items: if you have the room to store them, these are desireable, but expensive to ship...
front seats-should be a split style bench to allow access to the rear seat. the rear seat. the rear hatch and gate and all the mounting hardware.the rear bumper - all this is suburban only.

pics would help tell a better story.

Dinos63 · 08-21-2009, 06:08 PM

Quote:

Originally Posted by jonzcustomshop

the latches for the sliding rear windows if it has 'em, and the arms that keeps the rear hatch open, if they are not broken.
ths are probably the most valuable parts from a sub

the turn signal lights from the hood, and the rear taillights and housings if they are good.

big items: if you have the room to store them, these are desireable, but expensive to ship...
front seats-should be a split style bench to allow access to the rear seat. the rear seat. the rear hatch and gate and all the mounting hardware.the rear bumper - all this is suburban only.

pics would help tell a better story.

YEP X2

protrash64 · 08-21-2009, 06:10 PM

Quote:

Originally Posted by jonzcustomshop

the latches for the sliding rear windows if it has 'em, and the arms that keeps the rear hatch open, if they are not broken.
ths are probably the most valuable parts from a sub

the turn signal lights from the hood, and the rear taillights and housings if they are good.

big items: if you have the room to store them, these are desireable, but expensive to ship...
front seats-should be a split style bench to allow access to the rear seat. the rear seat. the rear hatch and gate and all the mounting hardware.the rear bumper - all this is suburban only.

pics would help tell a better story.

seats and anything from the doors back. The front is a pick-up. All the hatch stuff is impossible to find.

**aerotruk63** · 08-21-2009, 05:45 PM

GMC air conditioning unit would be an asset to someone.

**aerotruk63** · 08-21-2009, 05:46 PM

There was a guy looking today for the ram of the power assist steering.

**aerotruk63** · 08-21-2009, 05:48 PM

The aluminum wedge in the engine compartment that angles the power brake booster.

70 Suburban · 08-21-2009, 06:21 PM

yep i need the hoses and ram for the p/s

**too much stuff** · 08-21-2009, 09:46 PM

I will try to get some pics and maybe grab a few parts off it. It does have a split front seat. It is like a small bucket seat on the pass side. It does have sliding windows in the back. No rear seat. The parts that hold the rear gate up are bent...

70 Suburban · 08-21-2009, 09:56 PM

what about the power steering parts? trade sell?

**too much stuff** · 08-21-2009, 10:01 PM

If there is some demand i will try to go back and pull some parts off it. If that happens i will start a for sale thread. Right now i just need to know if it is worth my time to even mess with it. Eric

Demmit_Hemmit's 65 · 08-22-2009, 02:11 AM

I agree with what everybody has said above..............Burb parts are really difficult to find and if you can save some from the crusher I don't think you'll have a difficult time getting rid of them, as long as you can get them at a reasonable price...............Hemmit

jonzcustomshop · 08-22-2009, 08:26 AM

even if the hatch supports are there , but bent, they might be fixable...

ratskin · 08-22-2009, 09:22 AM

When you snag the power steering, make sure you get the center link, ram, and the bracket that mounts opposite the steering gearbox, as well as the gearbox itself. Also get the brackets and pulleys! If it's a custom cab, get the moldings. 4 way flasher, mounts in the dash, will have a GMC knob. GMC glovebox door is unique to GMC. Check the brake pedal to see if it says "Power Brake". I found one on a 1 ton in excellent shape, only one I've seen, and it's now on my 64 Suburban. Wiring harnesses, if the ends are good-no one repops them.

08-21-2009, 04:41 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	64 2 door burb. Parts? Hi guys, first off, i am a 67-72 guy but i like them all. Here is my questions: i found a 64 2 door gmc that is going to the crusher rather quickly. It is quite rusty but looks to have some good parts yet. GMC v-6 with a 2 speed auto, york A/C, power brakes, and power steering. The rig is very complete with a clam shell door on the back. I should have brought my camera...If i were to buy some of these parts, what is the demand and value of them? And what else should i grab? Any advice would be helpful. Thanks, Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-21-2009, 05:36 PM	#2
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 64 2 door burb. Parts? the latches for the sliding rear windows if it has 'em, and the arms that keeps the rear hatch open, if they are not broken. ths are probably the most valuable parts from a sub the turn signal lights from the hood, and the rear taillights and housings if they are good. big items: if you have the room to store them, these are desireable, but expensive to ship... front seats-should be a split style bench to allow access to the rear seat. the rear seat. the rear hatch and gate and all the mounting hardware.the rear bumper - all this is suburban only. pics would help tell a better story.

08-21-2009, 05:45 PM	#5
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64 2 door burb. Parts? GMC air conditioning unit would be an asset to someone. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

08-21-2009, 05:46 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64 2 door burb. Parts? There was a guy looking today for the ram of the power assist steering. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

08-21-2009, 05:48 PM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 64 2 door burb. Parts? The aluminum wedge in the engine compartment that angles the power brake booster. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

08-21-2009, 06:21 PM	#8
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 64 2 door burb. Parts? yep i need the hoses and ram for the p/s __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

08-21-2009, 09:46 PM	#9
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 64 2 door burb. Parts? I will try to get some pics and maybe grab a few parts off it. It does have a split front seat. It is like a small bucket seat on the pass side. It does have sliding windows in the back. No rear seat. The parts that hold the rear gate up are bent... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-21-2009, 09:56 PM	#10
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: 64 2 door burb. Parts? what about the power steering parts? trade sell? __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

08-21-2009, 10:01 PM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 64 2 door burb. Parts? If there is some demand i will try to go back and pull some parts off it. If that happens i will start a for sale thread. Right now i just need to know if it is worth my time to even mess with it. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-22-2009, 02:11 AM	#12
Demmit_Hemmit's 65 Senior Member Join Date: Mar 2002 Location: Peru, Indiana Posts: 741	Re: 64 2 door burb. Parts? I agree with what everybody has said above..............Burb parts are really difficult to find and if you can save some from the crusher I don't think you'll have a difficult time getting rid of them, as long as you can get them at a reasonable price...............Hemmit

08-22-2009, 08:26 AM	#13
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: 64 2 door burb. Parts? even if the hatch supports are there , but bent, they might be fixable...

08-22-2009, 09:22 AM	#14
ratskin Registered User Join Date: Oct 2006 Location: Western IL Posts: 358	Re: 64 2 door burb. Parts? When you snag the power steering, make sure you get the center link, ram, and the bracket that mounts opposite the steering gearbox, as well as the gearbox itself. Also get the brackets and pulleys! If it's a custom cab, get the moldings. 4 way flasher, mounts in the dash, will have a GMC knob. GMC glovebox door is unique to GMC. Check the brake pedal to see if it says "Power Brake". I found one on a 1 ton in excellent shape, only one I've seen, and it's now on my 64 Suburban. Wiring harnesses, if the ends are good-no one repops them.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.