Air Lift Dominator 2600, what fittings?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dznucks · 08-26-2009, 03:27 PM

I am tyring to find fittings for my dominator 2600's. i believe its a 3/4" NPT hole for the air fitting. Can anyone confirm? I am running 3/8" line and need a 90 deg, swivel, push-to-lock style fitting.

i can only find a 3/8" tube X 1/2" NPT 90 degree swivel. the only way i can see making that work is to use a 3/4" npt X 1/2" npt bushing.

I am going to be using bag hats so i need a 90 degree and it needs to be as low profile as possible to reduce the height of the bag hat.

what are yall using? Got part numbers? pics?

**kev2809** · 08-26-2009, 05:15 PM

I thought the dom 2600 come with 1/2 ports.. I haven't got my fittings yet but im using 4 of the 2600 dom and I think the site says 1/2" ports

chevygurly · 08-26-2009, 06:38 PM

yes they are 1/2" ports on the dom bags

**michael bustamante** · 08-26-2009, 07:23 PM

yea I bought 1/2 npt to 3/8 pushloks. get the brass ones, I heard the plastic ones arent so great

dznucks · 08-27-2009, 12:26 PM

yea, ok. i'm an idiot. i should have looked up the thread specs before.....of course i was assuming that because it physically measured 3/4 it was 3/4.

thanks

ShowSS12 · 08-28-2009, 12:42 AM

Quote:

Originally Posted by michael bustamante

yea I bought 1/2 npt to 3/8 pushloks. get the brass ones, I heard the plastic ones arent so great

get the numatik nickle ones....

dznucks · 08-28-2009, 07:44 AM

i ordered them from fastenal. they are nickel plated brass push-locks.

part # 0443084 $31.50 for a 5 pack. compare to ART's $11 for one.

08-26-2009, 03:27 PM	#1
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Air Lift Dominator 2600, what fittings?? I am tyring to find fittings for my dominator 2600's. i believe its a 3/4" NPT hole for the air fitting. Can anyone confirm? I am running 3/8" line and need a 90 deg, swivel, push-to-lock style fitting. i can only find a 3/8" tube X 1/2" NPT 90 degree swivel. the only way i can see making that work is to use a 3/4" npt X 1/2" npt bushing. I am going to be using bag hats so i need a 90 degree and it needs to be as low profile as possible to reduce the height of the bag hat. what are yall using? Got part numbers? pics?

08-26-2009, 05:15 PM	#2
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Air Lift Dominator 2600, what fittings?? I thought the dom 2600 come with 1/2 ports.. I haven't got my fittings yet but im using 4 of the 2600 dom and I think the site says 1/2" ports __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-26-2009, 06:38 PM	#3
chevygurly Registered User Join Date: Apr 2009 Location: California Posts: 22	Re: Air Lift Dominator 2600, what fittings?? yes they are 1/2" ports on the dom bags

08-26-2009, 07:23 PM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Air Lift Dominator 2600, what fittings?? yea I bought 1/2 npt to 3/8 pushloks. get the brass ones, I heard the plastic ones arent so great __________________ 1967custom

08-27-2009, 12:26 PM	#5
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Air Lift Dominator 2600, what fittings?? yea, ok. i'm an idiot. i should have looked up the thread specs before.....of course i was assuming that because it physically measured 3/4 it was 3/4. thanks

08-28-2009, 07:44 AM	#7
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Air Lift Dominator 2600, what fittings?? i ordered them from fastenal. they are nickel plated brass push-locks. part # 0443084 $31.50 for a 5 pack. compare to ART's $11 for one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.