Rear Mounted Aluminum Tanks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Daveboyd** · 09-12-2009, 09:27 PM

If your in the market for a new tank Don't over pay.

check out my listings in the vendors market place!

or go here

www.boydwelding.com

**passthebuck** · 09-12-2009, 10:02 PM

Do you do any work in stainless Dave?

**Daveboyd** · 09-12-2009, 10:06 PM

Quote:

Originally Posted by passthebuck

Do you do any work in stainless Dave?

No, only aluminum. Stainless is so expensive i cant sell the tanks.

BossHogg69 · 09-12-2009, 10:10 PM

nice work, thanks for sharing!!!

**Daveboyd** · 09-16-2009, 05:58 PM

Quote:

Originally Posted by bosshogg69

nice work, thanks for sharing!!!

thanks!!

FRENCHBLUE72 · 09-16-2009, 06:46 PM

Very cool we can always use a good tank fabricator around here..

kamikazekyle05 · 09-17-2009, 12:31 AM

Are the tanks baffled? Could i run a walbro fuel pump in it? Is there any other filler neck options?

**Daveboyd** · 09-17-2009, 07:38 PM

Quote:

Originally Posted by kamikazekyle05

Are the tanks baffled? Could i run a walbro fuel pump in it? Is there any other filler neck options?

Yes! the tanks are baffled and yes you could run a walbro pump. i also offer an efi system ready to run. i just posted new prices in the vendor marketplace.

kamikazekyle05 · 09-17-2009, 12:32 AM

O and Welcome!

1968SWBBigBlock · 09-17-2009, 10:37 PM

Dave - I look forward to meeting you next week - I will be over to the shop on thursday -

**Daveboyd** · 09-18-2009, 09:45 AM

Quote:

Originally Posted by 1968SWBBigBlock

Dave - I look forward to meeting you next week - I will be over to the shop on thursday -

See you then!!

hicktownhotrodder · 09-18-2009, 10:19 AM

Hey man nice work! ill be talking to you about building me a tank for my longhorn pickup to go between the cab and std. 8 foot box. welcome to the board

**Daveboyd** · 09-18-2009, 10:22 AM

Quote:

Originally Posted by hicktownhotrodder

Hey man nice work! ill be talking to you about building me a tank for my longhorn pickup to go between the cab and std. 8 foot box. welcome to the board

Great!! Looking forward to it!

**Daveboyd** · 09-29-2009, 11:38 AM

Quote:

Originally Posted by 1968SWBBigBlock

Dave - I look forward to meeting you next week - I will be over to the shop on thursday -

It was good to meet you here at the shop. Thanks again for your order!

**67cheby** · 09-29-2009, 11:42 AM

do you build any aluminum air tanks ??

**Daveboyd** · 09-29-2009, 11:45 AM

Quote:

Originally Posted by 67cheby

do you build any aluminum air tanks ??

No sorry. I do not have the Testing and Fabrication Procedures in place to build high pressure tanks.

**Hart_Rod** · 09-18-2009, 10:37 AM

Hey Dave,

I need a 90 degree aluminunm fuel filler neck (2"). How much shipped to 32571?

**Daveboyd** · 09-18-2009, 10:41 AM

Quote:

Originally Posted by Hart_Rod

Hey Dave,

I need a 90 degree aluminunm fuel filler neck (2"). How much shipped to 32571?

Weld-in?

**Hart_Rod** · 09-18-2009, 11:00 AM

Quote:

Originally Posted by Daveboyd

Weld-in?

Screw in would work. Then I could just jb weld it in. (I currentley has a screw in cap).

**Daveboyd** · 09-22-2009, 11:44 AM

Our shopping cart is now up and running again. Sorry for the delay.

**mr48chev** · 09-29-2009, 11:53 AM

Those are some good looking tanks Dave. I've got your site bookmarked for later reference.

**Daveboyd** · 10-05-2009, 05:57 PM

Quote:

Originally Posted by mr48chev

Those are some good looking tanks Dave. I've got your site bookmarked for later reference.

Thanks. New Info I have started the process to do another group buy and i will have killer prices again this time around. i have not set a cut off date or a required qty i am leaving that up to everyone else. If your interested in a new tank check out this post in the vendor forum. http://67-72chevytrucks.com/vboard/s...d.php?t=362307

**Daveboyd** · 10-06-2009, 01:22 PM

2009 boyd group buy price now posted.....

BossHogg69 · 10-06-2009, 10:18 PM

Dave - you got a link to that thread?

nevermind, i found it!

09-12-2009, 09:27 PM	#1
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Rear Mounted Aluminum Tanks If your in the market for a new tank Don't over pay. check out my listings in the vendors market place! or go here www.boydwelding.com __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

09-12-2009, 10:02 PM	#2
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Rear Mounted Aluminum Tanks Do you do any work in stainless Dave? __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

09-12-2009, 10:10 PM	#4
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Rear Mounted Aluminum Tanks nice work, thanks for sharing!!! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

09-16-2009, 06:46 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Rear Mounted Aluminum Tanks Very cool we can always use a good tank fabricator around here.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

09-17-2009, 12:31 AM	#7
kamikazekyle05 Registered User Join Date: Nov 2007 Location: Vernon, Texas Posts: 331	Re: Rear Mounted Aluminum Tanks Are the tanks baffled? Could i run a walbro fuel pump in it? Is there any other filler neck options?

09-17-2009, 12:32 AM	#9
kamikazekyle05 Registered User Join Date: Nov 2007 Location: Vernon, Texas Posts: 331	Re: Rear Mounted Aluminum Tanks O and Welcome!

09-17-2009, 10:37 PM	#10
1968SWBBigBlock Active Member Join Date: Oct 2006 Location: Ohio Posts: 1,643	Re: Rear Mounted Aluminum Tanks Dave - I look forward to meeting you next week - I will be over to the shop on thursday - __________________ 1968 SWB 454 + .040, 490HP x 540 FT pounds of Torque 10-1 Kb Forged pistons, recon rods w/ ARP wave loc bolts 781 heads Ported with 2.19/1.88 SSTvalves Lunati 60204 cam, Micro Trol lifters, Ported Edelbrock Performer Rpm manifold armor coated, Pertronix Triple Strike Ignition Holley 770 Street Avenger carb,Headers armor coated Built by Watson Ruppel Performance in Sarahsville Ohio. Hardshift Tranny Built Turbo 350,TSI 10" 3000 stall 12 Bolt Eaton Posi 4.10 Richmond Gears moser axles 18.5" x 31" Hoosier Pro Street Radials ET Classic 5 Wheels - polished Power Steering, Power Brakes,Disc Brakes,Tach & Gauge Dash, Tilt,Factory Air (gone) Custom Paint & Body Work Special thanks to my wife, my son and my money tree

09-18-2009, 10:19 AM	#12
hicktownhotrodder Rollin Coal Join Date: May 2009 Location: Winnebago Illinios Posts: 131	Re: Rear Mounted Aluminum Tanks Hey man nice work! ill be talking to you about building me a tank for my longhorn pickup to go between the cab and std. 8 foot box. welcome to the board __________________ I have three letters to all these import guys: God-Made-Chevy 04 GMC Sierra 2500HD Duramax 1972 Chevrolet C-30 Dually Pickup stock? 350 SM465 four speed 1977 GMC K-35, TH-400, 4X4 450 horse 454(dad's) 1993 Dodge cummins 5-speed DEAD!!

09-29-2009, 11:42 AM	#15
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Rear Mounted Aluminum Tanks do you build any aluminum air tanks ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-18-2009, 10:37 AM	#17
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Rear Mounted Aluminum Tanks Hey Dave, I need a 90 degree aluminunm fuel filler neck (2"). How much shipped to 32571? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

09-22-2009, 11:44 AM	#20
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Rear Mounted Aluminum Tanks Our shopping cart is now up and running again. Sorry for the delay. __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

09-29-2009, 11:53 AM	#21
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,712	Re: Rear Mounted Aluminum Tanks Those are some good looking tanks Dave. I've got your site bookmarked for later reference.

10-06-2009, 01:22 PM	#23
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Rear Mounted Aluminum Tanks 2009 boyd group buy price now posted..... __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

10-06-2009, 10:18 PM	#24
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Rear Mounted Aluminum Tanks Dave - you got a link to that thread? nevermind, i found it! __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!! Last edited by BossHogg69; 10-06-2009 at 10:51 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.