How wide rim can I go? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

outkast21 · 09-13-2009, 08:36 PM

I have a '63 with stock suspension. How wide of a 15" tall rim can I go on the back before I start rubbing on the trailing arms. If I have to move the suspension inward,what would be the cheapest route?

roofingbloke · 09-13-2009, 11:36 PM

I have a 63 long fleetside, im just about to order a set of 18s & 20s for my truck.

20 x 12 on the rear, tight fitt, you will need to widen the wheel tubs and cut out and strengthen the outer inner arch, no suspension mods needed,

20 x 10 will fitt, 5" backspace,

09-13-2009, 08:36 PM	#1
outkast21 Registered User Join Date: Sep 2009 Location: dundas ontario Posts: 7	How wide rim can I go? I have a '63 with stock suspension. How wide of a 15" tall rim can I go on the back before I start rubbing on the trailing arms. If I have to move the suspension inward,what would be the cheapest route?

09-13-2009, 11:36 PM	#2
roofingbloke Registered User Join Date: Apr 2009 Location: swindon, england Posts: 290	Re: How wide rim can I go? I have a 63 long fleetside, im just about to order a set of 18s & 20s for my truck. 20 x 12 on the rear, tight fitt, you will need to widen the wheel tubs and cut out and strengthen the outer inner arch, no suspension mods needed, 20 x 10 will fitt, 5" backspace,

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.