GA Cab corner molding,etc........ - The 1947 - Present Chevrolet & GMC Truck Message Board Network

plzsale09 · 09-18-2009, 07:26 PM

For sale

1.cab corner molding 25.00 shippedsmall pieces sold still have bigger piece for sale i will take 15.00 shipped for it.
2. 1970 lower bed molding 45.00 shipped good
3. Lower door molding 45.00 shipped good

plzsale09 · 09-18-2009, 07:27 PM

1 more pic

**special-K** · 09-18-2009, 09:09 PM

Most people may already know this,but all that trim is correct for 69-72.

plzsale09 · 09-19-2009, 09:20 PM

thanks for telling everyone this

Mark

plzsale09 · 09-20-2009, 12:23 PM

bump for Sunday

70LonghornCST · 09-19-2009, 12:00 AM

On a scale of 1-10, in what condition is the upper cab molding? Could you post some close ups of both upper pieces?

plzsale09 · 09-19-2009, 09:19 PM

I will do that for you tommorrow.

plzsale09 · 09-20-2009, 01:39 PM

Here is the pics of the cab corner molding you asked for.

plzsale09 · 09-24-2009, 12:12 PM

ttt

BB72CHEVKT · 09-24-2009, 12:33 PM

LWB or SWB

plzsale09 · 09-24-2009, 12:55 PM

I beleive it is short let me check and i'll get back to you.

70LonghornCST · 09-24-2009, 03:24 PM

Would you be willing to just sell one of the upper cab mouldinds? I am looking for a nice one.
Let me know either way.
Shipping to 95326

plzsale09 · 09-24-2009, 04:40 PM

Would you like the big one or the two little ones?

70LonghornCST · 09-24-2009, 05:18 PM

I'd like the little ones...

BB72CHEVKT · 09-24-2009, 05:24 PM

Did you find out if LWB or SWB?

plzsale09 · 09-24-2009, 05:35 PM

Yes i did it is for a LWB

70LonghornCST · 09-25-2009, 12:46 AM

I'll take the small upper moldings. Do you take paypal?

plzsale09 · 09-25-2009, 10:29 AM

Yes i do my paypal is markloves07@yahoo.com thanks alot

plzsale09 · 09-26-2009, 04:17 PM

ttt

70LonghornCST · 09-26-2009, 08:17 PM

paypal sent for the two uppers...Thanks!

plzsale09 · 09-26-2009, 09:25 PM

Thank you i will get them right out to you.

70LonghornCST · 10-14-2009, 12:42 AM

Quote:

Originally Posted by plzsale09

Thank you i will get them right out to you.

Just wondering if they've been sent?

plzsale09 · 09-27-2009, 11:31 AM

ttt

plzsale09 · 09-28-2009, 11:08 AM

^^^

plzsale09 · 09-29-2009, 04:55 PM

Bump

09-18-2009, 07:26 PM	#1
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Cab corner molding,etc........ For sale 1.cab corner molding 25.00 shippedsmall pieces sold still have bigger piece for sale i will take 15.00 shipped for it. 2. 1970 lower bed molding 45.00 shipped good 3. Lower door molding 45.00 shipped good Attached Images __________________ MARK Last edited by plzsale09; 09-26-2009 at 04:16 PM.

09-18-2009, 07:27 PM	#2
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ 1 more pic Attached Images __________________ MARK

09-18-2009, 09:09 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Cab corner molding,etc........ Most people may already know this,but all that trim is correct for 69-72. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-19-2009, 09:20 PM	#4
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ thanks for telling everyone this Mark __________________ MARK

09-20-2009, 12:23 PM	#5
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ bump for Sunday __________________ MARK

09-19-2009, 12:00 AM	#6
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Cab corner molding,etc........ On a scale of 1-10, in what condition is the upper cab molding? Could you post some close ups of both upper pieces? __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-19-2009, 09:19 PM	#7
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ I will do that for you tommorrow. __________________ MARK

09-20-2009, 01:39 PM	#8
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ Here is the pics of the cab corner molding you asked for. Attached Images __________________ MARK

09-24-2009, 12:12 PM	#9
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ ttt __________________ MARK

09-24-2009, 12:33 PM	#10
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Cab corner molding,etc........ LWB or SWB __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

09-24-2009, 12:55 PM	#11
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ I beleive it is short let me check and i'll get back to you. __________________ MARK

09-24-2009, 03:24 PM	#12
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Cab corner molding,etc........ Would you be willing to just sell one of the upper cab mouldinds? I am looking for a nice one. Let me know either way. Shipping to 95326 __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-24-2009, 04:40 PM	#13
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ Would you like the big one or the two little ones? __________________ MARK

09-24-2009, 05:18 PM	#14
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Cab corner molding,etc........ I'd like the little ones... __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-24-2009, 05:24 PM	#15
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Cab corner molding,etc........ Did you find out if LWB or SWB? __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400



Register or Log In To remove these advertisements.

09-24-2009, 05:35 PM	#16
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ Yes i did it is for a LWB __________________ MARK

09-25-2009, 12:46 AM	#17
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Cab corner molding,etc........ I'll take the small upper moldings. Do you take paypal? __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-25-2009, 10:29 AM	#18
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ Yes i do my paypal is markloves07@yahoo.com thanks alot __________________ MARK

09-26-2009, 04:17 PM	#19
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ ttt __________________ MARK

09-26-2009, 08:17 PM	#20
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Cab corner molding,etc........ paypal sent for the two uppers...Thanks! __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-26-2009, 09:25 PM	#21
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ Thank you i will get them right out to you. __________________ MARK

09-27-2009, 11:31 AM	#23
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ ttt __________________ MARK

09-28-2009, 11:08 AM	#24
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ ^^^ __________________ MARK

09-29-2009, 04:55 PM	#25
plzsale09 Registered User Join Date: Jun 2009 Location: Dallas, Ga Posts: 559	Re: Cab corner molding,etc........ Bump __________________ MARK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.