Lower rear shock mounts 67-72 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pritch · 09-27-2009, 10:31 PM

I don't know what these are called. The pieces that the rear end U-bolts bolt through and have the lower shock mount holes. I started cleaning up the rear end parts on my Panel, and I noticed that the holes for the lower shock mounts were really egg shaped. I have a couple others floating around here somewhere, but my question is: Are there better ways to do this, I mean, a reinforcment mod or something?

And if it turns out that the other ones I have are bad also, are there re-pops available? Can new ones be bought?

**N2TRUX** · 09-28-2009, 12:07 PM

Anyone?

SCOTI · 09-28-2009, 12:18 PM

It's a common problem when the shocks aren't checked periodically for tightness (the holes get wallowed out). You can weld some washers to each side of the opening for a new/thicker hole or new brackets are available from the aftermarket (shock relocating kits).

Twisted78SS · 09-28-2009, 01:11 PM

If you are referring to the lower shock plate, yes they are available by LMC and others. Mine are the same as yours, been through a few years of loose shocks.. I thought about repairing the old, but these are priced fairly cheap.

Item #20 in this pic?

Hottrucks · 09-28-2009, 01:54 PM

I cut a piece of pipe about 1/2" long made the hole bigger and welded in the pipe

pritch · 09-28-2009, 09:57 PM

Thanks, all. Some good ideas, for sure. I wonder if the LMC ones are any good. The price does seem right. I'll have to dig out the spares I have and see if they are any better before I make a decision.

SCOTI · 09-29-2009, 01:24 AM

Quote:

Originally Posted by pritch

Thanks, all. Some good ideas, for sure. I wonder if the LMC ones are any good. The price does seem right. I'll have to dig out the spares I have and see if they are any better before I make a decision.

Stock ride height?

skeeterbug · 09-29-2009, 11:38 PM

i got the shock relocator kit from cpp, just put them on my frame last friday. they were at a relitivel good price and came w/ all the bolts, nuts, and washers to do the install. i paired them up w/ 4" drop coils and nitro drop shocks it all went together very well. the replacement brackets are made of very thick steel as well, i was suprised @ the quality for the cost, dont know how they hold up yet will be a month ir so before i finish my frame off.

**NGN** · 10-02-2009, 02:33 AM

i got the LMC one's , they don't look exactly like original [ japan made ]i still didn't use them yet but they sure look like they'll work

09-27-2009, 10:31 PM	#1
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Lower rear shock mounts 67-72 I don't know what these are called. The pieces that the rear end U-bolts bolt through and have the lower shock mount holes. I started cleaning up the rear end parts on my Panel, and I noticed that the holes for the lower shock mounts were really egg shaped. I have a couple others floating around here somewhere, but my question is: Are there better ways to do this, I mean, a reinforcment mod or something? And if it turns out that the other ones I have are bad also, are there re-pops available? Can new ones be bought? __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

09-28-2009, 12:18 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,068	Re: Lower rear shock mounts 67-72 It's a common problem when the shocks aren't checked periodically for tightness (the holes get wallowed out). You can weld some washers to each side of the opening for a new/thicker hole or new brackets are available from the aftermarket (shock relocating kits). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 09-28-2009 at 12:19 PM.

09-28-2009, 01:11 PM	#4
Twisted78SS Wide n'Low Join Date: Jan 2007 Location: La Center, WA Posts: 1,511	Re: Lower rear shock mounts 67-72 If you are referring to the lower shock plate, yes they are available by LMC and others. Mine are the same as yours, been through a few years of loose shocks.. I thought about repairing the old, but these are priced fairly cheap. Item #20 in this pic? __________________ Trippin Hazard.. 67 swb, Gold Member.. 68 Suburban Air Force Retired

09-28-2009, 01:54 PM	#5
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: Lower rear shock mounts 67-72 I cut a piece of pipe about 1/2" long made the hole bigger and welded in the pipe

09-28-2009, 09:57 PM	#6
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: Lower rear shock mounts 67-72 Thanks, all. Some good ideas, for sure. I wonder if the LMC ones are any good. The price does seem right. I'll have to dig out the spares I have and see if they are any better before I make a decision. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

09-28-2009, 12:07 PM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: Lower rear shock mounts 67-72 Anyone? __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-29-2009, 11:38 PM	#8
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: Lower rear shock mounts 67-72 i got the shock relocator kit from cpp, just put them on my frame last friday. they were at a relitivel good price and came w/ all the bolts, nuts, and washers to do the install. i paired them up w/ 4" drop coils and nitro drop shocks it all went together very well. the replacement brackets are made of very thick steel as well, i was suprised @ the quality for the cost, dont know how they hold up yet will be a month ir so before i finish my frame off. __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

10-02-2009, 02:33 AM	#9
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Re: Lower rear shock mounts 67-72 i got the LMC one's , they don't look exactly like original [ japan made ]i still didn't use them yet but they sure look like they'll work Last edited by NGN; 10-02-2009 at 02:35 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.