66 shortbed for parts/full resto - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 10-04-2009, 04:13 PM

I am looking at a 66 but honestly only want it for the narrow posi rear. I would sell the truck or part it to recoup some of the purchase cost....it is a wood bed shortbed...bed crossmembers need replacing but sides and gate seem decent. Hood is good other than some dents. Doors have rust in bottom. Comes with repro floor pans and rockers and needs them. Needs a rad support. No engine...350 trans. Probably worth more parted out I assume but want to check and see WIW as a roller as well.

VA72C10 · 10-04-2009, 04:14 PM

Interior seems all there but nothing special.

Joemomma1 · 10-04-2009, 05:34 PM

Id say $700 is a little high. The bed, doors and hood may be the only parts really wanted from it. Im speaking from a cali point of view. I dont know how the market is over there.

VA72C10 · 10-04-2009, 05:45 PM

Yeah, cali numbers are definitely low for trucks from what I've seen....I can't imagine finding a rust free longbed that's running for under 4-5K around here and I hear of guys on here getting them for free and always under 500...

VA72C10 · 10-04-2009, 05:47 PM

Plus, I would offer less than the 700 since it's best offer and he's been sitting on it for a while...The posi rear (narrower than mine also for bigger rear rims) is supposed to be newly rebuilt with a modern posi unit which is really the only part I want from the truck. I plan to pull the inspection cover and drums to check everything out before buying since that's what I'm really buying the truck for.

Joemomma1 · 10-05-2009, 12:09 AM

Posi rears go for $300-$400 no? The bed will bring at least $250. Id say you would make it back.

VA72C10 · 10-06-2009, 07:15 AM

Tht's what I'm thinking. Thanks guys for the feedback.

62 short step · 10-06-2009, 08:24 AM

I'd say $500 to $600 for it.

10-04-2009, 04:13 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	66 shortbed for parts/full resto I am looking at a 66 but honestly only want it for the narrow posi rear. I would sell the truck or part it to recoup some of the purchase cost....it is a wood bed shortbed...bed crossmembers need replacing but sides and gate seem decent. Hood is good other than some dents. Doors have rust in bottom. Comes with repro floor pans and rockers and needs them. Needs a rad support. No engine...350 trans. Probably worth more parted out I assume but want to check and see WIW as a roller as well. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-04-2009, 04:14 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 66 shortbed for parts/full resto Interior seems all there but nothing special. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-04-2009, 05:34 PM	#3
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: 66 shortbed for parts/full resto Id say $700 is a little high. The bed, doors and hood may be the only parts really wanted from it. Im speaking from a cali point of view. I dont know how the market is over there.

10-04-2009, 05:45 PM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 66 shortbed for parts/full resto Yeah, cali numbers are definitely low for trucks from what I've seen....I can't imagine finding a rust free longbed that's running for under 4-5K around here and I hear of guys on here getting them for free and always under 500... __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-04-2009, 05:47 PM	#5
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 66 shortbed for parts/full resto Plus, I would offer less than the 700 since it's best offer and he's been sitting on it for a while...The posi rear (narrower than mine also for bigger rear rims) is supposed to be newly rebuilt with a modern posi unit which is really the only part I want from the truck. I plan to pull the inspection cover and drums to check everything out before buying since that's what I'm really buying the truck for. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-05-2009, 12:09 AM	#6
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: 66 shortbed for parts/full resto Posi rears go for $300-$400 no? The bed will bring at least $250. Id say you would make it back.

10-06-2009, 07:15 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: 66 shortbed for parts/full resto Tht's what I'm thinking. Thanks guys for the feedback. __________________ Looking for a 67-72 swb or blazer project in or around VA.

10-06-2009, 08:24 AM	#8
62 short step Senior Member Join Date: Aug 2005 Location: Greenwell Springs, Louisiana Posts: 2,882	Re: 66 shortbed for parts/full resto I'd say $500 to $600 for it. __________________ www.louisianaclassictruckclub.com 1965 c-10 86 chevy c/k 20

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.