Front Wheel Bearings. How do you know when bad? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

remist17 · 10-12-2009, 12:08 PM

I have a 93 Silverado 4x4 that has a good nosie coming from the front end. Noise changed with speed. Hav enot had a chance to see if it happens in 4x4. In 2 wheel drive the noise seems to have gotten louder at 55 (cruze speed). The funny thing is when its cold and sits for a while it takes some time to hear it. I am thinking it needs to warm up? I am thinking its either the dif bearings or wheel bearings. I do not know how to check to see if the wheel bearings are bad. Can any one tell me? I am hoping I can just repalce the wheel bearings in stead of getting the front differential worked on !!

Thanks

ChevLoRay · 10-12-2009, 12:57 PM

You may want me to move this to the 4WD forum. Let me know.

remist17 · 10-12-2009, 02:45 PM

If you think this is were that needs to go. Please move.

Thanks

remist17 · 11-13-2009, 05:03 PM

bump

Gene · 11-13-2009, 06:31 PM

If it's anything like my 99 you might look at the ABS sensor, mine came out of the wheel bearing housing and let dirt crud and anything else in there(they are just siliconed in). And if so, don't plan on just replacing the bearings, mine I had to replace the whole bearing carrier.

10-12-2009, 12:08 PM	#1
remist17 Registered User Join Date: Jul 2009 Location: PA Posts: 406	Front Wheel Bearings. How do you know when bad? I have a 93 Silverado 4x4 that has a good nosie coming from the front end. Noise changed with speed. Hav enot had a chance to see if it happens in 4x4. In 2 wheel drive the noise seems to have gotten louder at 55 (cruze speed). The funny thing is when its cold and sits for a while it takes some time to hear it. I am thinking it needs to warm up? I am thinking its either the dif bearings or wheel bearings. I do not know how to check to see if the wheel bearings are bad. Can any one tell me? I am hoping I can just repalce the wheel bearings in stead of getting the front differential worked on !! Thanks __________________ 2013 Chevy Silverado, Z71, 5.3L, 4 door 2005 Chevy Silverado, Z71, 5.3L, 4 door, 3.40 Support the Troops.

10-12-2009, 12:57 PM	#2
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Front Wheel Bearings. How do you know when bad? You may want me to move this to the 4WD forum. Let me know. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

10-12-2009, 02:45 PM	#3
remist17 Registered User Join Date: Jul 2009 Location: PA Posts: 406	Re: Front Wheel Bearings. How do you know when bad? If you think this is were that needs to go. Please move. Thanks __________________ 2013 Chevy Silverado, Z71, 5.3L, 4 door 2005 Chevy Silverado, Z71, 5.3L, 4 door, 3.40 Support the Troops.

11-13-2009, 05:03 PM	#4
remist17 Registered User Join Date: Jul 2009 Location: PA Posts: 406	Re: Front Wheel Bearings. How do you know when bad? bump __________________ 2013 Chevy Silverado, Z71, 5.3L, 4 door 2005 Chevy Silverado, Z71, 5.3L, 4 door, 3.40 Support the Troops.

11-13-2009, 06:31 PM	#5
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	Re: Front Wheel Bearings. How do you know when bad? If it's anything like my 99 you might look at the ABS sensor, mine came out of the wheel bearing housing and let dirt crud and anything else in there(they are just siliconed in). And if so, don't plan on just replacing the bearings, mine I had to replace the whole bearing carrier.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.