TN 454 being parted out take a look! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**thelonerife** · 10-23-2009, 10:02 PM

I bought this motor and started collecting things to make it work in my truck. I was going to put another higher flowing set of heads on it and have it gone through at a machine shop just to make sure everything was okay. The long block is supposed to have 20k mi. But plans change as they often do so these parts that I've collecting are up for sale. I tried selling it as a whole deal for 850 but no takers. I am asking similar if not exact prices that I paid for them.
454 long block 550 pick up
higher flow heads 50 pick up
LS1 oil pan-new- 45 shipped
exhaust manifolds-1 missing 1 stud- 45 shipped
starter heat shield 20 shipped
flex plate -dual pattern 25 shipped
flex plate thm400 25 shipped no pic yet
Mickey Thompson valve covers. (Bcowan has 1st choice on these)140 shippedSOLD!
72 only frame mounts w/ clamshells 125 shippedSOLD!
fuel pump 12 shipped
pipes that come from exh. man.and turn back-u can plug the bung-25 shipped
pulleys crank and water pump-need blasted 40 shippedSOLD!
1'' drop big block springs 75 shipped

long block onlyheads and block not accessories being sold above

Livrat · 10-23-2009, 10:19 PM

I'll take the pulleys.. crank and water pump for $40 shipped.. Please PM me with payment details..
Plus I will get in line for the MT valve covers...
Thanks!!

BCOWANWHEELS · 10-23-2009, 10:54 PM

Pm sent on covers

DieselEater · 10-23-2009, 10:59 PM

What is the casting number on the heads?

A...........

**thelonerife** · 10-23-2009, 11:24 PM

3993820

http://www.nastyz28.com/bbcmenu.php

**thelonerife** · 10-23-2009, 11:25 PM

3993820 is on the extra set of heads. I'm assuming thats what you were asking.The heads on the motor are peanut heads.

**thelonerife** · 10-24-2009, 05:17 PM

ttt

**thelonerife** · 10-24-2009, 09:01 PM

come on guys

petey-pablo · 10-24-2009, 09:53 PM

72 only frame mounts w/ clamshells 125 shipped wow thats a good deal for someone who needs them..Come on guys help him make a sale

**thelonerife** · 10-25-2009, 01:26 AM

Livrat, your up on the valve covers.

Livrat · 10-25-2009, 04:48 PM

I'll take them.. PM sent

**thelonerife** · 10-25-2009, 06:33 PM

I'll have to get a box for them and get them out next week. Thanks!

70stroker · 10-25-2009, 08:05 PM

would yoube willing to ship the heads? any more pics?

**thelonerife** · 10-25-2009, 09:13 PM

I would rather not

ABLAZN · 10-26-2009, 09:03 AM

Part question here,but may be interested if I need the parts too. Why is the LS1 oil pan needed? If it is a must have for a big block conversion, I may be interested in it and the Turbo 400 flex plate. Also is there a way to ship them together and save on shipping? Thanks!!!!!

**thelonerife** · 10-26-2009, 07:32 PM

As far as I know an LS1 pan is not needed for a conversion. I bought it from a member here that advertised it as a new big block oilpan and it is..It just turned out to be an LS1.(he didn't have pics) I just wanted to start with a new pan as long as I had the motor out. On shipping... The prices are shipped.

**thelonerife** · 10-29-2009, 07:13 PM

ttt

wldavis · 10-31-2009, 09:18 PM

Payment sent for the 72 only frame mounts w/ clamshells.

Thanks,
Dan

**thelonerife** · 10-31-2009, 09:26 PM

they'll go out Mon.Thanks

Southern C10 · 10-31-2009, 10:57 PM

I live near Chuck and will be heading to Fort Benning GA from Clarksville on 19 Nov and then up to North AL on 20 Nov if someone wants it along that route. I will drop it off along the interstate for free.

Hope that helps you Chuck.

**thelonerife** · 11-01-2009, 11:07 AM

thanks southern C10

**thelonerife** · 11-01-2009, 04:12 PM

Lowered some prices. I want this gone soon.

**thelonerife** · 11-02-2009, 08:30 PM

ttt

**thelonerife** · 11-03-2009, 10:35 PM

lowered prices

**thelonerife** · 11-04-2009, 07:45 PM

ttt

10-23-2009, 10:02 PM	#1
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	454 being parted out take a look! I bought this motor and started collecting things to make it work in my truck. I was going to put another higher flowing set of heads on it and have it gone through at a machine shop just to make sure everything was okay. The long block is supposed to have 20k mi. But plans change as they often do so these parts that I've collecting are up for sale. I tried selling it as a whole deal for 850 but no takers. I am asking similar if not exact prices that I paid for them. 454 long block 550 pick up higher flow heads 50 pick up LS1 oil pan-new- 45 shipped exhaust manifolds-1 missing 1 stud- 45 shipped starter heat shield 20 shipped flex plate -dual pattern 25 shipped flex plate thm400 25 shipped no pic yet Mickey Thompson valve covers. (Bcowan has 1st choice on these)140 shippedSOLD! 72 only frame mounts w/ clamshells 125 shippedSOLD! fuel pump 12 shipped pipes that come from exh. man.and turn back-u can plug the bung-25 shipped pulleys crank and water pump-need blasted 40 shippedSOLD! 1'' drop big block springs 75 shipped long block onlyheads and block not accessories being sold above __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 11-03-2009 at 10:34 PM. Reason: lowered prices

10-23-2009, 10:19 PM	#2
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 454 being parted out take a look! I'll take the pulleys.. crank and water pump for $40 shipped.. Please PM me with payment details.. Plus I will get in line for the MT valve covers... Thanks!! Last edited by Livrat; 10-23-2009 at 10:21 PM.

10-23-2009, 10:54 PM	#3
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 454 being parted out take a look! Pm sent on covers __________________ I BELIEVE IN JOHN 3:16

10-23-2009, 10:59 PM	#4
DieselEater Registered User Join Date: Dec 2006 Location: Trinidad, Colorado Posts: 642	Re: 454 being parted out take a look! What is the casting number on the heads? A........... __________________ 69' 3/4 4X4 470ci BBC 700 HP.... D60/14bolt 205/465 http://profile.myspace.com/index.cfm...ndid=127691959

10-23-2009, 11:24 PM	#5
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! 3993820 http://www.nastyz28.com/bbcmenu.php __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-23-2009, 11:25 PM	#6
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! 3993820 is on the extra set of heads. I'm assuming thats what you were asking.The heads on the motor are peanut heads. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687 Last edited by thelonerife; 10-23-2009 at 11:26 PM.

10-24-2009, 05:17 PM	#7
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! ttt __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-24-2009, 09:01 PM	#8
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! come on guys __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-24-2009, 09:53 PM	#9
petey-pablo "THE GREEN GOBLIN" Join Date: Mar 2008 Location: Fremont Ca. Posts: 1,025	Re: 454 being parted out take a look! 72 only frame mounts w/ clamshells 125 shipped wow thats a good deal for someone who needs them..Come on guys help him make a sale __________________ Petey-pablo "THE GREEN GOBLIN" 1972 Cheyenne 10 Short Fleet Side Front 2.5inch Spindles with 2inch Springs Rear 4inch drop Springs. 454BBC TH400,Posi 1971 Cheyenne 10 Long Fleet Side 454BBC TH350,Posi Sold Drive it like you stole it! Petey-pablo@sbcglobal.net

10-25-2009, 01:26 AM	#10
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! Livrat, your up on the valve covers. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-25-2009, 04:48 PM	#11
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: 454 being parted out take a look! I'll take them.. PM sent

10-25-2009, 06:33 PM	#12
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! I'll have to get a box for them and get them out next week. Thanks! __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-25-2009, 08:05 PM	#13
70stroker Registered User Join Date: Jan 2007 Location: pittsburg kansas Posts: 894	Re: 454 being parted out take a look! would yoube willing to ship the heads? any more pics? __________________ 70 GMC build: http://67-72chevytrucks.com/vboard/s...d.php?t=613130

10-25-2009, 09:13 PM	#14
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! I would rather not __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-26-2009, 09:03 AM	#15
ABLAZN Oh..never mind.... Join Date: Aug 2006 Location: Oregon Posts: 588	Re: 454 being parted out take a look! Part question here,but may be interested if I need the parts too. Why is the LS1 oil pan needed? If it is a must have for a big block conversion, I may be interested in it and the Turbo 400 flex plate. Also is there a way to ship them together and save on shipping? Thanks!!!!! __________________ 1972 Blazer -6 inch lift -35 inch BFG A/T's Turbo 350 NP-205 454 BB (for now) MORE TO COME !!!!!! Now going to 2WD!!!!! Sold. I got it back after 22 years and did not even know it !!! THE STORY HERE Project Low Down Dirty Rat



Register or Log In To remove these advertisements.

10-26-2009, 07:32 PM	#16
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! As far as I know an LS1 pan is not needed for a conversion. I bought it from a member here that advertised it as a new big block oilpan and it is..It just turned out to be an LS1.(he didn't have pics) I just wanted to start with a new pan as long as I had the motor out. On shipping... The prices are shipped. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-29-2009, 07:13 PM	#17
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! ttt __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-31-2009, 09:18 PM	#18
wldavis Registered User Join Date: Jun 2005 Location: Winder, GA Posts: 25	Re: 454 being parted out take a look! Payment sent for the 72 only frame mounts w/ clamshells. Thanks, Dan

10-31-2009, 09:26 PM	#19
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! they'll go out Mon.Thanks __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

10-31-2009, 10:57 PM	#20
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: 454 being parted out take a look! I live near Chuck and will be heading to Fort Benning GA from Clarksville on 19 Nov and then up to North AL on 20 Nov if someone wants it along that route. I will drop it off along the interstate for free. Hope that helps you Chuck. __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

11-01-2009, 11:07 AM	#21
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! thanks southern C10 __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-01-2009, 04:12 PM	#22
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! Lowered some prices. I want this gone soon. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-02-2009, 08:30 PM	#23
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! ttt __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-03-2009, 10:35 PM	#24
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! lowered prices __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

11-04-2009, 07:45 PM	#25
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 454 being parted out take a look! ttt __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode