pics of 24's on a 67-72 please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The Big Green · 11-04-2009, 09:08 PM

Here's mine on 20in Boss 303's, 20x8.5 standard backspace. I need to get my wheels ordered in the next couples weeks so they can be on their way to me. Wheels are hard to pick out, big decision for me lol. I need to get a idea of what I want, and need help. I'm posting a few pics for reference, because I don't know how deep an offset I can go. I'd say 2 inches between my tires and my fenders, and like 3in before they hit the lower bars on my 4-link.

smashingchuck · 11-04-2009, 10:02 PM

We just did this a few months ago...

http://67-72chevytrucks.com/vboard/s...d.php?t=352882

The Big Green · 11-04-2009, 10:20 PM

Quote:

Originally Posted by smashingchuck

We just did this a few months ago...

http://67-72chevytrucks.com/vboard/s...d.php?t=352882

Couldn't find it on here.

65 on 24's · 11-09-2009, 10:35 PM

sup vc family

The Big Green · 11-09-2009, 10:41 PM

I'm not in VC anymore. I'm Freaks of Nature. I still hangout with them, they are all my friends in the local chapter.

**kev2809** · 11-09-2009, 10:49 PM

Quote:

Originally Posted by The Big Green

I'm not in VC anymore. I'm Freaks of Nature. I still hangout with them, they are all my friends in the local chapter.

*awkward*

nice truck big green, any specific pics of your valves and how you ran your lines, etc.?

The Big Green · 11-09-2009, 11:09 PM

I can take a better pic tomorrow. There may be one in my build thread. You can see two valves peeking from under my cab in the pic above. They are by my front bed frame mounts and the upper bar X-member. There's two in front of those and 4 on the other side. If there's no pics in my build thread that show them better and I didn't explain then I'll snap a couple pics at daylight. I wanted them somewhat hidden keeps everything less superfluous.

The Big Green · 11-09-2009, 11:19 PM

Quote:

Originally Posted by 65 on 24's

sup vc family

How long you been VC?

**lolife99** · 11-09-2009, 11:41 PM

QUOTE=The Big Green;3602993]Here's mine on 20in Boss 303's, 20x8.5 standard backspace. I need to get my wheels ordered in the next couples weeks so they can be on their way to me. Wheels are hard to pick out, big decision for me lol. I need to get a idea of what I want, and need help. I'm posting a few pics for reference, because I don't know how deep an offset I can go. I'd say 2 inches between my tires and my fenders, and like 3in before they hit the lower bars on my 4-link.

I say break out the tape measure and start measuring.
No one elses truck is going to be the same as yours. Wheels cost too much to guess on size.
Looking for a certain style is a different subject,... but offset needs to be measured per the individual truck.

The Big Green · 11-09-2009, 11:57 PM

I have an 8.5 wheel and I have 12inches to play with in the back. Whatever back offset is on these wheels I can go from there. Thing is that ever wheel I liked today that stated 24x10 didn't offer a 5x5 in them or they didn't offer both a 22 and 24 in the same wheel. In my first post I said my measurements but don't know my 20in wheel offset. They come in a mm offset so I'll have to google it. I just wanted pics so I'll know there's that wheel that I can find. There's no Boss 330's in a 22/24 for a 5x5 and I liked that wheel.

**lolife99** · 11-10-2009, 02:45 AM

Maybe this will help.
Measure your backspace,... then look at chart for offset in MM.

Say your wheel is 8.5 inches wide with a 5" backspace,... you would have a 6mm offset

The Big Green · 11-10-2009, 09:53 AM

Thanks a lot for that chart. When I search for wheels today I'll know just what I'm looking at rather than a mm offset.

11-04-2009, 09:08 PM	#1
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,304	pics of 24's on a 67-72 please Here's mine on 20in Boss 303's, 20x8.5 standard backspace. I need to get my wheels ordered in the next couples weeks so they can be on their way to me. Wheels are hard to pick out, big decision for me lol. I need to get a idea of what I want, and need help. I'm posting a few pics for reference, because I don't know how deep an offset I can go. I'd say 2 inches between my tires and my fenders, and like 3in before they hit the lower bars on my 4-link. Last edited by The Big Green; 11-04-2009 at 09:10 PM.

11-04-2009, 10:02 PM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: pics of 24's on a 67-72 please We just did this a few months ago... http://67-72chevytrucks.com/vboard/s...d.php?t=352882 __________________ 78 Build Thread 4Runner Build

11-09-2009, 10:35 PM	#4
65 on 24's Registered User Join Date: Sep 2006 Location: memphis tn, (nutbush) Posts: 160	Re: pics of 24's on a 67-72 please sup vc family __________________ ridin big yo 5in cpp lowerin springs in back lowered 3in in front with cut springs for now 5 lug swap and disk in front 5 lug and disk in the rear with 3.23 gears mild 350/400heads 7547weiand intake 600 Edelbrock chrome block hugger headers 2 1/2 pipes in to a x pipes super 40 flows and turn downs turbo 350 with shift kit

11-09-2009, 10:41 PM	#5
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,304	Re: pics of 24's on a 67-72 please I'm not in VC anymore. I'm Freaks of Nature. I still hangout with them, they are all my friends in the local chapter. Last edited by The Big Green; 11-09-2009 at 10:46 PM.

11-09-2009, 11:09 PM	#7
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,304	Re: pics of 24's on a 67-72 please I can take a better pic tomorrow. There may be one in my build thread. You can see two valves peeking from under my cab in the pic above. They are by my front bed frame mounts and the upper bar X-member. There's two in front of those and 4 on the other side. If there's no pics in my build thread that show them better and I didn't explain then I'll snap a couple pics at daylight. I wanted them somewhat hidden keeps everything less superfluous.

11-09-2009, 11:41 PM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: pics of 24's on a 67-72 please QUOTE=The Big Green;3602993]Here's mine on 20in Boss 303's, 20x8.5 standard backspace. I need to get my wheels ordered in the next couples weeks so they can be on their way to me. Wheels are hard to pick out, big decision for me lol. I need to get a idea of what I want, and need help. I'm posting a few pics for reference, because I don't know how deep an offset I can go. I'd say 2 inches between my tires and my fenders, and like 3in before they hit the lower bars on my 4-link. I say break out the tape measure and start measuring. No one elses truck is going to be the same as yours. Wheels cost too much to guess on size. Looking for a certain style is a different subject,... but offset needs to be measured per the individual truck. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 11-09-2009 at 11:43 PM.

11-09-2009, 11:57 PM	#10
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,304	Re: pics of 24's on a 67-72 please I have an 8.5 wheel and I have 12inches to play with in the back. Whatever back offset is on these wheels I can go from there. Thing is that ever wheel I liked today that stated 24x10 didn't offer a 5x5 in them or they didn't offer both a 22 and 24 in the same wheel. In my first post I said my measurements but don't know my 20in wheel offset. They come in a mm offset so I'll have to google it. I just wanted pics so I'll know there's that wheel that I can find. There's no Boss 330's in a 22/24 for a 5x5 and I liked that wheel.

11-10-2009, 02:45 AM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: pics of 24's on a 67-72 please Maybe this will help. Measure your backspace,... then look at chart for offset in MM. Say your wheel is 8.5 inches wide with a 5" backspace,... you would have a 6mm offset Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 11-10-2009 at 02:47 AM.

11-10-2009, 09:53 AM	#12
The Big Green Registered User Join Date: Oct 2007 Location: Fort Smith,AR Posts: 1,304	Re: pics of 24's on a 67-72 please Thanks a lot for that chart. When I search for wheels today I'll know just what I'm looking at rather than a mm offset.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.