|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
11-05-2009, 07:59 PM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: Waterboro ,MAINE
Posts: 547
|
fuel gauge wire on 87 tbi
ok i relized that i dont have a wire for my fuel gauge!!!!!! i have the fuel pump plug to the relay but where does the fuel gauge wire go on a 87 r10 sending unit???
Last edited by 78-5.3; 11-05-2009 at 08:00 PM. |
|
|
|
11-05-2009, 10:11 PM
|
#2 |
|
The One And Only !!!
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
|
Re: fuel gauge wire on 87 tbi
A little more detail into what your doing may help......
Are you replacing the sending unit and find no provision for the fuel gauge ? If so, I just ran into the same problem installing a 86 tank in my 97. I bought a 86 sending unit but it wasn't right (not like the old one out of the 86), I found there are a couple different style sending units and couldn't find the proper one in a aftermarket. The local dealer has the right one but I'm not shelling out close to $400 for a bare (no pump included) sending unit.
__________________
93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz !  The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
|
|
|
11-07-2009, 12:00 PM
|
#3 | |
|
Registered User
Join Date: Oct 2009
Location: Waterboro ,MAINE
Posts: 547
|
Re: fuel gauge wire on 87 tbi
Quote:
|
|
|
|
|
|
11-07-2009, 09:08 PM
|
#4 |
|
The One And Only !!!
Join Date: Jan 2007
Location: Hole in the woods Florida
Posts: 4,567
|
Re: fuel gauge wire on 87 tbi
You should have three wires coming off the sending unit, A gray and purple in a connector plug and a black with a eyelet that goes to a grounding point (frame).
The gray wire powers the fuel pump and the purple activates the fuel gauge.
__________________
93 Jeep XJ 88 Buick La Sabra Toys; 88 TA-GTA in the works.... 97 GMC Ext. Cab 502 Crate 5 Spd......Sucks Gas But Haulz Azz ! The primary function of an Engineer is to make it difficult for the Fabricator and impossible for the Mechanic. "Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
|
|
|
|
|
11-08-2009, 08:59 AM
|
#5 | |
|
Registered User
Join Date: Oct 2009
Location: Waterboro ,MAINE
Posts: 547
|
Re: fuel gauge wire on 87 tbi
Quote:
|
|
|
|
|
|
11-08-2009, 10:07 AM
|
#6 |
|
Registered User
 
Join Date: Apr 2009
Location: New Freedom Pa.
Posts: 1,335
|
Re: fuel gauge wire on 87 tbi
I have OEM electrical manuals for an 87 , what do you need? Fuel sender wiring only? or the whole run of the wiring front to back...
Let me know... Desert Last edited by Desert1957; 11-08-2009 at 10:07 AM. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
