Edelbrock Performer Intake - The 1947 - Present Chevrolet & GMC Truck Message Board Network

my 85 gmc · 01-20-2003, 02:52 AM

Does anyone know how much height difference there is between the stock intake manifold on my 85 LE9 305ci and te Edelbrock Performer Intake?
The reason I'am asking is I would like to keep my stock Q-jet and I'am not sure if the increased height will affect the TV cable on the 700R4 tranny.
Due to increased height of the Edelbrock will the angle on the TV cable cause a problem and will the brackets and hardware work?

Thanks

Rob

Please help I know how fussy the TV cables can be and I don't want to burn up my tranny!

ocbaud · 01-20-2003, 03:27 AM

i dont think there should be a problem if your only gonna be running the normal performer. the performer rpm you MAY have problems with since its quite a bit taller

**swervin ervin** · 01-20-2003, 06:35 PM

No problem at all with a Performer. I know this for a fact, since it's what I have.

my 85 gmc · 01-20-2003, 08:20 PM

Mike

Did you use the stock brackets and hardware for the TV cable and is this a upgrade in intakes worth the money?

Thanks Rob

Anyone else have anything to add?

**swervin ervin** · 01-20-2003, 08:53 PM

Yep. All the stock parts. Hooked up just like stock. As far if it's worth it. They are by far better than stock cast iron truck 305 intakes. It will help but don't expect gigantic gains in power. A intake alone, no matter how big or good will not give you great power by itself anyway. But, we have to start somewhere and the intake is a good place to start. If you can swing, I say go for it. At least it looks cool.

01-20-2003, 02:52 AM	#1
my 85 gmc Registered User Join Date: Jan 2003 Location: Moncton New Brunswick Posts: 56	Edelbrock Performer Intake Does anyone know how much height difference there is between the stock intake manifold on my 85 LE9 305ci and te Edelbrock Performer Intake? The reason I'am asking is I would like to keep my stock Q-jet and I'am not sure if the increased height will affect the TV cable on the 700R4 tranny. Due to increased height of the Edelbrock will the angle on the TV cable cause a problem and will the brackets and hardware work? Thanks Rob Please help I know how fussy the TV cables can be and I don't want to burn up my tranny!

01-20-2003, 06:35 PM	#3
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	No problem at all with a Performer. I know this for a fact, since it's what I have. __________________ Mike 1985 Chevy C-10

01-20-2003, 08:20 PM	#4
my 85 gmc Registered User Join Date: Jan 2003 Location: Moncton New Brunswick Posts: 56	Question for Swervin Ervin Mike Did you use the stock brackets and hardware for the TV cable and is this a upgrade in intakes worth the money? Thanks Rob Anyone else have anything to add?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-20-2003, 03:27 AM	#2
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i dont think there should be a problem if your only gonna be running the normal performer. the performer rpm you MAY have problems with since its quite a bit taller

01-20-2003, 08:53 PM	#5
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Yep. All the stock parts. Hooked up just like stock. As far if it's worth it. They are by far better than stock cast iron truck 305 intakes. It will help but don't expect gigantic gains in power. A intake alone, no matter how big or good will not give you great power by itself anyway. But, we have to start somewhere and the intake is a good place to start. If you can swing, I say go for it. At least it looks cool.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.