90 -91 blazer -burb dash cluster

[78-5.3]

anyone got a pic of a 90 -91 blazer -burb dash cluster need to check one out thanks!!!!

[Daggar]

which part do you need a pic of. The exterior or the backside?

[JEM]

This is the one in my '91:

http://67-72chevytrucks.com/vboard/s...5&postcount=62

It's not stock; it's been converted with a tach and a small lower-right-corner fuel gauge. The cluster works great, unfortunately I buggered the fuel-level sender in the tank while installing a bigger Walbro pump, so the tank has to come back out again.

At least from that exercise I learned that I really do have a 40-gallon tank; the build sheet on the glovebox didn't say what it was, and with the original fuel pump even if I crawled into the gas station with it stumbling and coughing I could never get more than 30gal in the tank, turns out it basically wouldn't suck the last 10gal.

Most of the '90 clusters and I think all the '91s had electronic speedos.

[78-5.3]

nice thats what i wanted to see thx all i need now is a tacho!! i wonder if the 90 91 cluster will fit in my 78 c10

[Irish1941]

Why not just use a '81-'89 gauge housing? Or the proper yr tach dash? They seem to be everywhere.

Originally Posted by JEM

This is the one in my '91:

http://67-72chevytrucks.com/vboard/s...5&postcount=62

Most of the '90 clusters and I think all the '91s had electronic speedos.

Hey that's cool. Always wondered if you could fit a factory tach in a '90-'91.
What did you fuel gauge come from?
Here is my '89 with tach. '

[jbristo67]

No it wont because 90-91 uses an electric speedo

[gmachinz]

That and there's no provision for a dash mounted wiper switch....unless you wanna trim it out for one.