Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
11-22-2009, 09:09 PM | #1 |
Registered User
Join Date: Sep 2008
Location: Morehead, KY
Posts: 55
|
Breaking in the new motor
This is my new best: 12.17 @ 109.7 1.77 60'. Full weight (minus spare), stock 20's and tires, 1/2 tank gas, DA -200.
Motor: 418 LS3, AI CNC 243 heads, Futral cam, ARH 1 7/8" headers (with cats), JBA exhaust, CAI, pulley, Efan, RPM stage VI tranny, Vig 3200 stall, BUT my CR is only 10.1:1 as the motor was built for boost, & still running stock intake manifold. Slip breakdown: Fastest Run: Next fastest run Best mph 110.408 (1.840 60') 60' 1.778 1.771 660': 5.003 4.998 1/8: 7.751 7.747 1/8mph: 88.945 88.897 1/4 : 12.175 12.178 1/4 mph: 109.730 109.496 This was a 12.19 pass.... Here is the 12.17, I had switched to night shot mode on my video camera, and it didn't pick up the timing board very well. |
11-22-2009, 09:46 PM | #2 |
Right on the line, baby!
Join Date: Oct 2003
Location: Phila, PA 19130
Posts: 1,486
|
Re: Breaking in the new motor
Motor sounds good. It's gonna be insane with spray.
__________________
83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here! |
11-22-2009, 11:58 PM | #3 |
Registered User
Join Date: Jun 2008
Location: Frostburg, Maryland
Posts: 38
|
Re: Breaking in the new motor
Impressive! Gotta love those LS engines.
Dave
__________________
'71 C-10 medium bed. Pump gas 454" +.030", stock valved 049s, dana 60 w/410s. 12.25 at 108. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|