Breaking in problems, or did I do something wrong? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'70GMCStep · 12-21-2009, 12:10 AM

Installed CCP; tubular lower and upper control arms kit, then upgraded the front brakes to disc brake kit. Not sure why I am noticing a 1/4 inch drop on left front. Had it gone over by mechanic friend, and aligned. Drives and brakes straight. Steering has been great since I bought it. Where do I go from here?

700 R4 I put in pulls strong, but does that lugging thing around 40-45 or so. Before that and after that point, nothing odd. Normal or was the tranny switch set correctly, tv cable?

Just got it on the road a few days ago and DONT want to mess it up. Wife would kill.

I appreciate it.
'70GMCStep

'70 GMC Shortbed Stepside
'65 Chevy C-10

ruffrida2005 · 12-21-2009, 12:14 AM

Man sorry I couldn't be any help, but tell your wife not to kill Mr. T.

62gmc910 · 12-21-2009, 12:26 AM

Do you have a vacuum switch on the lock up ,try touching the brake pedal to disingage the lock up to see if the lug dissapears

*lakeroadster* · 12-21-2009, 08:19 AM

I pitty da fool who messes with Mr. T!

circa 1978

As for the 1/4" drop drive it for a while things tend to settle. If it is still a problem in a month or so how about adding a 1/4" shim.

Can't offer any advice for the 700 R4... I am a Muncie kinda guy.

protrash64 · 12-21-2009, 08:59 PM

Sometimes its the rear that will cause the front to be off a little. I would definitely let it settle for awhile and see how it goes....if not you can try swapping coils side to side to see what happens. Little bit of time but no $$$$

jbon64 · 12-21-2009, 10:15 PM

maybe wire in a switch for your converter lockup . that way it will only lock up when you want it to. i have a 200r4 (similar OD trans) and it did the same thing until i wired in a toggle switch to activate the lock up . now i only use the lockup if i'm at highway speeds

'70GMCStep · 12-22-2009, 01:09 AM

Liking the toggle switch to activate plan. Think I'm going to slip in a tranny temp gauge while I'm at it from what I hear about 700 r4's, if nothing else, some more peace of mind. Going to let the beast roam around and see if the suspension takes it's place. I appreciate the help!

That was just a little humor about my wife earlier on my part. She comes from a gear head family and helps in the garage. Good lookin' and knows a way around a garage...priceless...

'70GMCStep

'70 GMC Stepside SWB
'65 Chevy C-10 LWB

ampsyco · 12-23-2009, 10:48 PM

lugging is usually normal for overdrive trannys at the point of lockup.

under light or partial load i would say its normal.

12-21-2009, 12:10 AM	#1
'70GMCStep Registered User Join Date: Jul 2007 Location: Rogersville, Missouri Posts: 89	Breaking in problems, or did I do something wrong? Installed CCP; tubular lower and upper control arms kit, then upgraded the front brakes to disc brake kit. Not sure why I am noticing a 1/4 inch drop on left front. Had it gone over by mechanic friend, and aligned. Drives and brakes straight. Steering has been great since I bought it. Where do I go from here? 700 R4 I put in pulls strong, but does that lugging thing around 40-45 or so. Before that and after that point, nothing odd. Normal or was the tranny switch set correctly, tv cable? Just got it on the road a few days ago and DONT want to mess it up. Wife would kill. I appreciate it. '70GMCStep '70 GMC Shortbed Stepside '65 Chevy C-10

12-21-2009, 12:14 AM	#2
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Breaking in problems, or did I do something wrong? Man sorry I couldn't be any help, but tell your wife not to kill Mr. T. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

12-21-2009, 12:26 AM	#3
62gmc910 Registered User Join Date: Nov 2009 Location: Cremona AB Canada Posts: 370	Re: Breaking in problems, or did I do something wrong? Do you have a vacuum switch on the lock up ,try touching the brake pedal to disingage the lock up to see if the lug dissapears __________________ 62 GMC 910 short fleetside 454 super t10 14 bolt w/gov lock 70s c20 front discs (built in the 80s) 65 GMC 930 dualwheel 292 4spd all origonal 39k mi(my sons truck) 63 GMC 950 camperized school bus, (Gus the bus) 350 4speed 2 speed rear 64 GMC 950 "spare" bus 283? 4speed detroit locker 53 GMC 1ton dual wheel bus 78 GMC c25 short course off road race truck(son's truck) 355 th400 14 bolt (www.wheel2wheel.ca) 88 Peterbilt 379 longhood (hauls race truck)

12-21-2009, 08:19 AM	#4
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: Breaking in problems, or did I do something wrong? I pitty da fool who messes with Mr. T! circa 1978 As for the 1/4" drop drive it for a while things tend to settle. If it is still a problem in a month or so how about adding a 1/4" shim. Can't offer any advice for the 700 R4... I am a Muncie kinda guy. Attached Images

12-21-2009, 08:59 PM	#5
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: Breaking in problems, or did I do something wrong? Sometimes its the rear that will cause the front to be off a little. I would definitely let it settle for awhile and see how it goes....if not you can try swapping coils side to side to see what happens. Little bit of time but no $$$$ __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

12-21-2009, 10:15 PM	#6
jbon64 Registered User Join Date: Jan 2006 Location: sidney , illinois Posts: 312	Re: Breaking in problems, or did I do something wrong? maybe wire in a switch for your converter lockup . that way it will only lock up when you want it to. i have a 200r4 (similar OD trans) and it did the same thing until i wired in a toggle switch to activate the lock up . now i only use the lockup if i'm at highway speeds __________________ hey.....smell my finger 64 nova wagon , 63 nova convertible

12-22-2009, 01:09 AM	#7
'70GMCStep Registered User Join Date: Jul 2007 Location: Rogersville, Missouri Posts: 89	Re: Breaking in problems, or did I do something wrong? Liking the toggle switch to activate plan. Think I'm going to slip in a tranny temp gauge while I'm at it from what I hear about 700 r4's, if nothing else, some more peace of mind. Going to let the beast roam around and see if the suspension takes it's place. I appreciate the help! That was just a little humor about my wife earlier on my part. She comes from a gear head family and helps in the garage. Good lookin' and knows a way around a garage...priceless... '70GMCStep '70 GMC Stepside SWB '65 Chevy C-10 LWB Last edited by '70GMCStep; 12-22-2009 at 01:17 AM. Reason: Forgot an item

12-23-2009, 10:48 PM	#8
ampsyco Registered User Join Date: Aug 2006 Location: florida Posts: 142	Re: Breaking in problems, or did I do something wrong? lugging is usually normal for overdrive trannys at the point of lockup. under light or partial load i would say its normal.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.