clutch linkage help? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blk65fleet · 01-14-2010, 01:29 AM

i am converting to a 4 speed from an auto so i am having to run the clutch linkage
i wanted to know if there is any mods i have to make to the linkage since i am running a 350 instead of the i6

**Captainfab** · 01-14-2010, 01:36 AM

The linkage should be the same for a I6 or a V8. The one difference is the ballstud, you'll need to get one that screws into the block at the forward position. The one for the I6 is swedged into the bracket that bolts to the I6 block.

If you're running headers, that may pose another issue with the bellcrank, depending on the headers.

DWright · 01-16-2010, 12:42 AM

Quote:

Originally Posted by Captainfab

The linkage should be the same for a I6 or a V8. The one difference is the ballstud, you'll need to get one that screws into the block at the forward position. The one for the I6 is swedged into the bracket that bolts to the I6 block.

If you're running headers, that may pose another issue with the bellcrank, depending on the headers.

are you referring to the hole under the dipstick as being the one the ball stud goes into? my block doesn't have a hole in that position. if it is indeed the position you are referring to, can i simply drill and tape the block for it?

**Captainfab** · 01-16-2010, 02:25 AM

Yes it is right there by the dip stick. You can certainly drill and tap the block as long as the boss is there.

Quote:

Originally Posted by DWright

are you referring to the hole under the dipstick as being the one the ball stud goes into? my block doesn't have a hole in that position. if it is indeed the position you are referring to, can i simply drill and tape the block for it?

DWright · 01-16-2010, 09:30 AM

how deep does the hole have to be?

**Captainfab** · 01-17-2010, 01:02 AM

I don't know off hand since I've not had to drill and tap one. I would suggest getting a ballstud and measure it. You don't want to drill too deep or you'll get into the water jacket. You may find that you will need to finish the threads with a bottom tap after you've gone as far as you can with a starting tap.

Quote:

Originally Posted by DWright

how deep does the hole have to be?

blk65fleet · 01-14-2010, 10:40 PM

do you know where i could find the dif ball stud

markeb01 · 01-14-2010, 11:49 PM

Here's a link to at least one supplier for the frame and block studs:

http://www.classicparts.com/1963-84-...info/90%2D844/
http://www.classicparts.com/1963-72-...info/90%2D845/

01-14-2010, 01:29 AM	#1
blk65fleet Registered User Join Date: Aug 2009 Location: acworth,georgia Posts: 30	clutch linkage help? i am converting to a 4 speed from an auto so i am having to run the clutch linkage i wanted to know if there is any mods i have to make to the linkage since i am running a 350 instead of the i6

01-14-2010, 01:36 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: clutch linkage help? The linkage should be the same for a I6 or a V8. The one difference is the ballstud, you'll need to get one that screws into the block at the forward position. The one for the I6 is swedged into the bracket that bolts to the I6 block. If you're running headers, that may pose another issue with the bellcrank, depending on the headers. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 01-14-2010 at 01:37 AM.

01-16-2010, 09:30 AM	#5
DWright Shlong Bed Club Join Date: Apr 2009 Location: Milford, VA Posts: 220	Re: clutch linkage help? how deep does the hole have to be?

01-14-2010, 10:40 PM	#7
blk65fleet Registered User Join Date: Aug 2009 Location: acworth,georgia Posts: 30	Re: clutch linkage help? do you know where i could find the dif ball stud

01-14-2010, 11:49 PM	#8
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: clutch linkage help? Here's a link to at least one supplier for the frame and block studs: http://www.classicparts.com/1963-84-...info/90%2D844/ http://www.classicparts.com/1963-72-...info/90%2D845/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.