drop kit or parts what is the best???

[rigon4]

I want to drop my truck i want to do 4/4 or so i want to do it with a spindle and spring up front would like to do 3 inch spindle and 1 inch spring but may do a 2.5 spindle and 2 inch spring and shack/hanger out back i do not want to flip.

So can you guys tell me were to go for great stuff that will fit. I do not want to have a stay away story.

thanks Jeff

And a pic of my truck the red one and would like it to be as low as the blue truck sorry if it is a members truck but I like how it sits

[GMC Guy]

http://www.stylintrucks.com/sn.aspx?...sults_trigger=

i went with all the bell tech stuff. 3 inch spindles and the shackle and hanger kit. good quality parts, but expect to spend a whole weekend putting everything on though lol
i have mine set to a 3/3 drop cuz i like a little rake
but you could use the 3 inch spindles and just cut a half coil out of your factory springs. if i want to go a little lower that's what i'd probably do.

[oldschool18]

Yeah I wouldnt buy springs yet.. put the spindles on and see how low you are first and if you wanna go just alittle bit lower I would try cutting your springs thats what I did....but I got lowering leaf springs for rear and then I cut the front hangers off and moved them up the frame to get the height im wanted....I got my stuff from airbagit.com, Have had the spindles on for 6 years now and had the leafs on for 2 until I bagged it..

[Slonaker]

To use 3" spindlles with those wheels, you'll have to do some grinding on the lower control arms. I have 2.5" spindles, and they clear my 8" rally wheels just fine.

I think that blue truck is lowered more than 4 inches in the back, probably with a flip kit.

Slonaker

[Alex1]

What wheel size on the red truck! I MUST KNOW! AND BACK SPACING THANKS!

[glock35ipsc]

Are those 15's on the blue truck? It's probably just me, but they look bigger than 15's. I love chrome Vette rallys, and they look great on that truck!!

[rigon4]

Well i want the tires about one inch from the top of the wheel wells so I think it will be ok with a 4/4 I love how Tony SS truck sits and that is what he did i think

Wheels grinding im not worried about im going to get a set of 15x6 car rallys for the front it will make the tires look and fit better

Alex1 the fronts are 15x8 4.5 inch bs with a 26-8-15 tire and the rear is a 15x10 5 inch bs with 29-15-15 tire and some pics for you

[Alex1]

Originally Posted by rigon4

Well i want the tires about one inch from the top of the wheel wells so I think it will be ok with a 4/4 I love how Tony SS truck sits and that is what he did i think

Wheels grinding im not worried about im going to get a set of 15x6 car rallys for the front it will make the tires look and fit better

Alex1 the fronts are 15x8 4.5 inch bs with a 26-8-15 tire and the rear is a 15x10 5 inch bs with 29-15-15 tire and some pics for you

Thanks, I appreciate it!

[Restrorob]

Originally Posted by rigon4

Alex1 the fronts are 15x8 4.5 inch bs with a 26-8-15 tire and the rear is a 15x10 5 inch bs with 29-15-15 tire and some pics for you

Rigon4,

How much space (inches) do you have between the tires (side wall) and the leaf springs with that set up ?

Thanks

[rigon4]

Restrorob the tires are flush with the body on the out side a 1/4 inch from the box floor on the inside and 2 inches give or take from the leaf spring.

When the truck is going in for paint im going to tub it by cutting down 67-72 bed wheel tubs and taking it to the frame rail in prep for a for link set up some day inside the frame rails for max wheel and tire room

[JohnC]

Originally Posted by glock35ipsc

Are those 15's on the blue truck? It's probably just me, but they look bigger than 15's. I love chrome Vette rallys, and they look great on that truck!!

I'm pretty sure they are 15's. It's Silvereagle's friends truck that they built. Here is the info on it from another thread.

Originally Posted by silvereagle07

The blue truck is a buddy of mine. I helped him build it a few years ago. It's a 1982 Silvarado with a 355/TH350 drivetrain.
It's a 4or5/6 drop 2.5 spindles/cut 1/2 coil and flip in rear
The wheels are repro car rallye wheels with corvette caps and trim rings.
15x8 front with 275/50/15 BFG Radial T/A
15x10 rear with 295/60/15 BFG Radial T/A
The color we got off of a mid 90's truck at the Ford dealer we work at.

[thehitchmaster]

keep in mind what slonaker said. if your going to run 15's with 3" spindles.

[3r!c84]

i put 3in drop spindles and didnt grind any from the lca.only some from the arm holing the caliper and the top of the caliper a little.
and yes its on stock 15x8 rallys

[thehitchmaster]

my rallys hit the control arms near the lower ball joint and also the control arm itself when I turned. hope im not jackin up the thread.

[lolife99]

Originally Posted by thehitchmaster

my rallys hit the control arms near the lower ball joint and also the control arm itself when I turned. hope im not jackin up the thread.

Nothing a 4-1/2" grinder can't fix.
Just a little trim and you will be fine.

[thehitchmaster]

thats what i ended up doing. I just didnt want any surprises for him when installing his kit. A grinder and a torch can fix anything lol.

[rigon4]

ttt any other brands that are good

[bigarmzz]

Originally Posted by rigon4

ttt any other brands that are good

like i just posted on that other thread, i personally like western chassis stuff for quality and fit/finish ....sport truck direct sells there brand