|
|
|
02-12-2010, 01:58 AM
|
#1 |
|
Registered User
Join Date: Aug 2009
Location: Vancouver, Wa
Posts: 8
|
c20 to c10 cab mount
Does anyone know where to get c10 cab mounts? Just picked up a 65 C20 longbed, and well.....like always it's got sagging mounts in the back and i'd like to replace them with c10's and some shims to line up the bed/cab. short of chopping some off another frame, does anyone make repo's?
|
|
|
|
02-12-2010, 05:15 AM
|
#2 |
|
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: c20 to c10 cab mount
Welcome to the forums from Kansas City, KS.
The rear cab mount perches for the '60-'66 Chevy C10 trucks are not reproduced. I will send you a PM on where to get a pair. |
|
|
|
|
02-19-2010, 02:52 PM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: bisbee, arizona
Posts: 1,529
|
Re: c20 to c10 cab mount
the c20's are different from the c 10's The frame mounts are different, the c20's and larger are one type and currently unavailable. the c10 are there own type.
The c10 rubber bushings are currently available in both rubber and poly. The thing to do is to find the FRAME mounts for a c10, chisle off the rivets and do the same for the c20's. then you can put the c10 FRAM mounts on you c20 fram with bolts and then you can use the c10 rubber bushings. Its simple swap but chisling eight rivets on each fram is a PITA. But the ride and noise reduction is worth it. |
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
