What size sway bar works best? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

64GMCHorsepower · 03-23-2010, 10:46 PM

I'm looking to get a front sway bar for my 64 GMC......

I see 7/8" , 1" and also 1 1/8"

Does it really make a huge difference in which one I get?

is one size better than the other?

Do I need a special one with my front-end being lowered 2"-3"......

Thanks for the help

**N2TRUX** · 03-24-2010, 12:30 AM

Any of them will work. The standard size on the 73-87 C-10 was 1", and the C-20's came with 1 1/8". I would go with the larger size if it's available.

The size of the bar doesn't matter if the truck is lowered or not. There are a couple of options available for mounting it. The stock bushing clamp "stands" are riveted to the frame. If your truck never had a sway bar it won't have the stands.

You can locate the stock stands, or buy a lower profile version from E.C.E. You can also bolt the clamps directly to the frame. This might work best if your truck was a bit lower, but should be alright as it is.

64GMCHorsepower · 03-24-2010, 08:23 PM

What do you mean by bolt the clamps directly to the frame? I thought the sway bars were always attached to the control arms?

**N2TRUX** · 03-24-2010, 08:59 PM

Quote:

Originally Posted by 64GMCHorsepower

What do you mean by bolt the clamps directly to the frame? I thought the sway bars were always attached to the control arms?

The other end...

Russ65C10 · 05-06-2010, 11:57 PM

Bigger is better :-)

My 65 came stock with a 7/8 but I am in the process of replacing it with what I believe is a 1.25 inch off of a late 80's C30. The 7/8 just isn't enough bar for me especially with the 15/16th inch IROC Z28 bar I have on the rear.

Do your self a favor and just go down to your local pick-a-part and pull everything you need off of late 70's or early 80's 3/4 ton. That should get you the 1 1/8th bar, if you want a rear bar pull one off of 3rd gen Camaro. You shouldn't have to spend more than $30 - $35 per bar with all the mounting hardware. The Camaro bars mount up really nice on the back with the coils. Here an article on how to: http://www.low69cst.freeservers.com/CamaroBar.htm

mclairmo · 05-07-2010, 12:09 AM

That rear sway bar article is awesome. Thanks.

03-23-2010, 10:46 PM	#1
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	What size sway bar works best? I'm looking to get a front sway bar for my 64 GMC...... I see 7/8" , 1" and also 1 1/8" Does it really make a huge difference in which one I get? is one size better than the other? Do I need a special one with my front-end being lowered 2"-3"...... Thanks for the help __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-24-2010, 12:30 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Re: What size sway bar works best? Any of them will work. The standard size on the 73-87 C-10 was 1", and the C-20's came with 1 1/8". I would go with the larger size if it's available. The size of the bar doesn't matter if the truck is lowered or not. There are a couple of options available for mounting it. The stock bushing clamp "stands" are riveted to the frame. If your truck never had a sway bar it won't have the stands. You can locate the stock stands, or buy a lower profile version from E.C.E. You can also bolt the clamps directly to the frame. This might work best if your truck was a bit lower, but should be alright as it is. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

03-24-2010, 08:23 PM	#3
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What size sway bar works best? What do you mean by bolt the clamps directly to the frame? I thought the sway bars were always attached to the control arms? __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

05-06-2010, 11:57 PM	#5
Russ65C10 Registered User Join Date: Jan 2010 Location: San Jose, CA Posts: 124	Re: What size sway bar works best? Bigger is better :-) My 65 came stock with a 7/8 but I am in the process of replacing it with what I believe is a 1.25 inch off of a late 80's C30. The 7/8 just isn't enough bar for me especially with the 15/16th inch IROC Z28 bar I have on the rear. Do your self a favor and just go down to your local pick-a-part and pull everything you need off of late 70's or early 80's 3/4 ton. That should get you the 1 1/8th bar, if you want a rear bar pull one off of 3rd gen Camaro. You shouldn't have to spend more than $30 - $35 per bar with all the mounting hardware. The Camaro bars mount up really nice on the back with the coils. Here an article on how to: http://www.low69cst.freeservers.com/CamaroBar.htm

05-07-2010, 12:09 AM	#6
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: What size sway bar works best? That rear sway bar article is awesome. Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.