|
|
|
03-28-2010, 02:57 PM
|
#1 |
|
Registered User
Join Date: Oct 2008
Location: broken arrow oklahoma
Posts: 266
|
Power steering
Practically everyone on here has done the power steering conversion, including myself. My question is, is there any simple solution for fixing the steering to turn as sharp to the right as it does to the left? I figured if I cut the frame and weld in the conversion bracket recessed into the frame it would give me the correct geometry, but was hoping for an easier solution. Thanks Guys.
|
|
|
|
03-28-2010, 05:58 PM
|
#2 |
|
Registered User
Join Date: Dec 2009
Location: daytona beach fl
Posts: 187
|
Re: Power steering
srry to jack thread but i was wondering if anyone has a
parts list/info on the swap i want to do this on my 61 when i swap to disk in the front? can i just use the powerstering of the doner truck that im taking my front brake setup? thanks for the info guys ray
__________________
61 step/long bed SBW(SOLD) NEED A NEW PROJECT |
|
|
|
|
03-28-2010, 08:15 PM
|
#3 |
|
Shlong Bed Club
Join Date: Apr 2009
Location: Milford, VA
Posts: 220
|
Re: Power steering
i thought i was only having that problem because i thought i didnt install the pitman arm corectly. (clocked wrong) is this a common problem or did i do something wrong?
__________________
"If it ain't broke, hit it with a hammer, then fix it.." 
|
|
|
|
|
03-28-2010, 09:13 PM
|
#4 |
|
Registered User
Join Date: Oct 2008
Location: broken arrow oklahoma
Posts: 266
|
Re: Power steering
It shouldn't have anything to do with the Pittman arm, it is the geometry. When adding power steering using a adapter plate you are pushing the entire power steering gear box to the left, about 1/2". This is why it turns sharper to the left than the right.
I got all my power steering parts from the donor truck when I was doing the front member swap for disc brakes. If you get one part off the donor truck, get all the parts, I mean everything, even if you don't think you will ever need it, "EVERYTHING". If you don't you will regret it later, every bolt, nut, and washer. |
|
|
|
|
03-29-2010, 01:15 AM
|
#5 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Power steering
You should be able to compensate for most if not all of it by adjusting your tie rod ends towards the passenger side.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-29-2010, 07:14 AM
|
#6 | |
|
Shlong Bed Club
Join Date: Apr 2009
Location: Milford, VA
Posts: 220
|
Re: Power steering
Quote:
__________________
"If it ain't broke, hit it with a hammer, then fix it.."
|
|
|
|
|
|
03-29-2010, 02:06 AM
|
#7 |
|
Account Suspended
Join Date: May 2005
Location: Kansas City, KS
Posts: 3,906
|
Re: Power steering
You beat me to the punch Captain...I was going to state the same solution. Thanks for sharing.
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
