Brake Line Kit Issues

[skoffice]

Ok guys, I bought a SS Pre Bent brake line kit for the front half of my truck. I got it from LMC for the 71-72 year trucks since I converted to power. I'm using it on my '64 so I understand that it won't be perfect, but I am just not getting it haha. It seems to be wayyy off. I am using a hydroboost setup from an '80s truck and a prop. valve from CPP. I am going to have to make my own lines from the MC to the prop. valve of course, but the rest of the lines dont seem to route in sync with eachother.

Does anyone have pics of how they routed theirs if they used a kit?

From the prop. valve do they go under the frame or over the top and across the crossmember?

Where Does the T go for the front brake lines? Is there a prefered mounting location?

I'm about ready to just send it back and bend my own lines haha but I'd rather try to figure it out. Any help and/or pictures would be great because I am stumped

[skoffice]

Anybody have any pics at all of how they routed their brake lines?