TF master cylinder options - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RRinWT · 07-05-2010, 11:37 AM

Hey Guys!

I need some advise. I'm planning on coverting to a dual chamber master cylinder on my 57 and still rum drums all the way around. I want to use the adapter bracket that mounts in the stock location and not firewall mounted. Can anyone tell mo of a suitable donor vehicle to get a MC from? Of couse I going to buy a new one, I just don't know what to tell the guy at the parts store.

Any info would be greatly appreciated.

Rob
55-9 Chevy/GMC a.k.a. Frank

Kim57 · 07-05-2010, 02:41 PM

If you are talking about the power booster early vettes had smaller ones in them (I think they are 7" diameter). if it is just the master cylinder, you need one that is specific for four wheel drums.
These guys have the parts to do what ever you want. You could probably get the parts cheaper from a normal parts store but you would have to make your own adaptor to fit them to your frame.
http://www.brotherstrucks.com/departments.asp?dept=404
Kim

entourageguy · 07-05-2010, 02:58 PM

Talk to MBG Mike. He is a vendor on here and he usually has a discount for us members. Good guy and good prices. I just used one of his under floor mounts with the pedal arm and worked out ok.

Link to PM him is below
or look him up in the vendor area

http://67-72chevytrucks.com/vboard/p...=newpm&u=18694

07-05-2010, 11:37 AM	#1
RRinWT Registered User Join Date: Apr 2010 Location: Odessa, TX Posts: 11	TF master cylinder options Hey Guys! I need some advise. I'm planning on coverting to a dual chamber master cylinder on my 57 and still rum drums all the way around. I want to use the adapter bracket that mounts in the stock location and not firewall mounted. Can anyone tell mo of a suitable donor vehicle to get a MC from? Of couse I going to buy a new one, I just don't know what to tell the guy at the parts store. Any info would be greatly appreciated. Rob 55-9 Chevy/GMC a.k.a. Frank

07-05-2010, 02:41 PM	#2
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: TF master cylinder options If you are talking about the power booster early vettes had smaller ones in them (I think they are 7" diameter). if it is just the master cylinder, you need one that is specific for four wheel drums. These guys have the parts to do what ever you want. You could probably get the parts cheaper from a normal parts store but you would have to make your own adaptor to fit them to your frame. http://www.brotherstrucks.com/departments.asp?dept=404 Kim

07-05-2010, 02:58 PM	#3
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: TF master cylinder options Talk to MBG Mike. He is a vendor on here and he usually has a discount for us members. Good guy and good prices. I just used one of his under floor mounts with the pedal arm and worked out ok. Link to PM him is below or look him up in the vendor area http://67-72chevytrucks.com/vboard/p...=newpm&u=18694 __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited Last edited by entourageguy; 07-05-2010 at 02:59 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.