Ralley Center Cap Bolt Size ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MI2CHEVYS · 07-07-2010, 03:51 AM

I was wondering if someone knew the size of the bolt that holds the Center Cap on the stock truck ralleys ? Size and thread pitch.
Thanks in advance.

WICKITKLOWN · 07-07-2010, 11:31 AM

i dont know what it is but best thing to do is order them from lmctruck.com thats what i had to do

MI2CHEVYS · 07-09-2010, 01:25 AM

I would rather go to the local hardware store.

Some one has to know what size they are.

**lolife99** · 07-09-2010, 07:02 AM

5/16-18.
I usually take a tap and clean the threads on each wheel.
Also make sure you get the correct length. (not sure, you're going to have to measure)
I use stainless "button head" allen screws also, for a different look.

MI2CHEVYS · 07-10-2010, 02:26 AM

[QUOTE=lolife99;4080552]5/16-18.
I usually take a tap and clean the threads on each wheel.
Also make sure you get the correct length. (not sure, you're going to have to measure)
I use stainless "button head" allen screws also, for a different look.[/QUOTE\]

Thank you so very much !!!!!!!!

07-07-2010, 03:51 AM	#1
MI2CHEVYS Registered User Join Date: Mar 2007 Location: PHOENIX, ARIZONA Posts: 123	Ralley Center Cap Bolt Size ? I was wondering if someone knew the size of the bolt that holds the Center Cap on the stock truck ralleys ? Size and thread pitch. Thanks in advance. __________________ MY DAD HAD A SAYING " DO IT RIGHT OR GET THE F**K OUTA HERE!" http://s657.photobucket.com/albums/u...view=slideshow

07-07-2010, 11:31 AM	#2
WICKITKLOWN Registered User Join Date: May 2010 Location: Marana, AZ Posts: 12	Re: Ralley Center Cap Bolt Size ? i dont know what it is but best thing to do is order them from lmctruck.com thats what i had to do __________________ 79 CHEVY BLAZER 454 B.B.C. WICKITKLOWN

07-09-2010, 01:25 AM	#3
MI2CHEVYS Registered User Join Date: Mar 2007 Location: PHOENIX, ARIZONA Posts: 123	Re: Ralley Center Cap Bolt Size ? I would rather go to the local hardware store. Some one has to know what size they are. __________________ MY DAD HAD A SAYING " DO IT RIGHT OR GET THE F**K OUTA HERE!" http://s657.photobucket.com/albums/u...view=slideshow

07-09-2010, 07:02 AM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Ralley Center Cap Bolt Size ? 5/16-18. I usually take a tap and clean the threads on each wheel. Also make sure you get the correct length. (not sure, you're going to have to measure) I use stainless "button head" allen screws also, for a different look. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 07-09-2010 at 07:02 AM.

07-10-2010, 02:26 AM	#5
MI2CHEVYS Registered User Join Date: Mar 2007 Location: PHOENIX, ARIZONA Posts: 123	Re: Ralley Center Cap Bolt Size ? [QUOTE=lolife99;4080552]5/16-18. I usually take a tap and clean the threads on each wheel. Also make sure you get the correct length. (not sure, you're going to have to measure) I use stainless "button head" allen screws also, for a different look.[/QUOTE\] Thank you so very much !!!!!!!! __________________ MY DAD HAD A SAYING " DO IT RIGHT OR GET THE F*K OUTA HERE!" http://s657.photobucket.com/albums/u...view=slideshow Last edited by MI2CHEVYS; 07-10-2010 at 02:27 AM.*

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.