Cast Iron Headers on a 230?! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

motiveauto · 07-14-2010, 09:20 PM

I was wondering if any of you have used the cast iron headers available from stoveboltengineco.com I was considering doing the typical tube headers but I want an older look to the motor.

geezer#99 · 07-14-2010, 09:31 PM

I have some on my 65. Work great. No interference with the clutch linkage either. Cast iron and should last forever. Running 2 and 1/4 pipe back to turbo muffs and 2" out the back. Installed by po.

Heater63 · 07-15-2010, 01:18 AM

X2

I own a pair on my 292 build, not run yet though. Very solid and very cool.
Nothing but praise for them when you ask around, like at Inliners.org

gtbrain · 07-15-2010, 10:48 AM

I have a set on my 66 250. Love em and they fit perfectly.

Shaky · 07-17-2010, 01:26 PM

You guys are killing me!

geezer#99 · 07-17-2010, 02:15 PM

How about a little peek!!!!

raycow · 07-17-2010, 05:08 PM

http://www.stoveboltengineco.com/aca...?productid=171

Ray

Shaky · 07-17-2010, 05:24 PM

Quote:

Originally Posted by geezer#99

How about a little peek!!!!

Yeah! That's what I'm talkin' about! How do they sound?

geezer#99 · 07-17-2010, 06:38 PM

They're very quiet. No ringing like on some headers. I got turbos on it so it's quite quiet. Another pic for you.

raycow · 07-17-2010, 07:34 PM

Geezer, it looks like you took off the heat plate in your second pic. Was there some kind of problem with it?

Ray

geezer#99 · 07-17-2010, 07:46 PM

The plate was leaking in one corner. Just a drip. Was a bad gasket. It's bolted to the Offy I'm gonna install next week. I'll post some pics of that later when I get it on.

raycow · 07-17-2010, 07:50 PM

Thanks. I was afraid it didn't work, or maybe didn't work satisfactorily.

Ray

geezer#99 · 07-17-2010, 08:05 PM

It worked excellently. Without it the old 230 stumbles and pharts till it's real warm. Gotta use a bit of choke for awhile!!!

Heater63 · 07-18-2010, 12:37 AM

Yes, these inlines need heat on the intake manifold. Without it your atomized fuel will puddle on the intake floor and run like crap.

07-14-2010, 09:20 PM	#1
motiveauto Registered User Join Date: Dec 2008 Location: long island new york Posts: 88	Cast Iron Headers on a 230?! I was wondering if any of you have used the cast iron headers available from stoveboltengineco.com I was considering doing the typical tube headers but I want an older look to the motor. __________________ 86 K20 6" lift 66 C10 LS2 T56 1947 Ford Rat Rod Softail Deluxe Softail Chopper

07-14-2010, 09:31 PM	#2
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: Cast Iron Headers on a 230?! I have some on my 65. Work great. No interference with the clutch linkage either. Cast iron and should last forever. Running 2 and 1/4 pipe back to turbo muffs and 2" out the back. Installed by po.

07-15-2010, 01:18 AM	#3
Heater63 Registered User Join Date: Dec 2007 Location: N Texas Posts: 580	Re: Cast Iron Headers on a 230?! X2 I own a pair on my 292 build, not run yet though. Very solid and very cool. Nothing but praise for them when you ask around, like at Inliners.org __________________ 292 + TKO500

07-15-2010, 10:48 AM	#4
gtbrain Registered User Join Date: Apr 2008 Location: bismarck North Dakota Posts: 51	Re: Cast Iron Headers on a 230?! I have a set on my 66 250. Love em and they fit perfectly.

07-17-2010, 01:26 PM	#5
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: Cast Iron Headers on a 230?! You guys are killing me! __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce

07-17-2010, 02:15 PM	#6
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: Cast Iron Headers on a 230?! How about a little peek!!!! Attached Images

07-17-2010, 05:08 PM	#7
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Cast Iron Headers on a 230?! http://www.stoveboltengineco.com/aca...?productid=171 Ray

07-17-2010, 06:38 PM	#9
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: Cast Iron Headers on a 230?! They're very quiet. No ringing like on some headers. I got turbos on it so it's quite quiet. Another pic for you. Attached Images

07-17-2010, 07:34 PM	#10
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Cast Iron Headers on a 230?! Geezer, it looks like you took off the heat plate in your second pic. Was there some kind of problem with it? Ray

07-17-2010, 07:46 PM	#11
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: Cast Iron Headers on a 230?! The plate was leaking in one corner. Just a drip. Was a bad gasket. It's bolted to the Offy I'm gonna install next week. I'll post some pics of that later when I get it on.

07-17-2010, 07:50 PM	#12
raycow Registered User Join Date: Mar 2003 Location: San Francisco, CA USA Posts: 2,454	Re: Cast Iron Headers on a 230?! Thanks. I was afraid it didn't work, or maybe didn't work satisfactorily. Ray

07-17-2010, 08:05 PM	#13
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: Cast Iron Headers on a 230?! It worked excellently. Without it the old 230 stumbles and pharts till it's real warm. Gotta use a bit of choke for awhile!!!

07-18-2010, 12:37 AM	#14
Heater63 Registered User Join Date: Dec 2007 Location: N Texas Posts: 580	Re: Cast Iron Headers on a 230?! Yes, these inlines need heat on the intake manifold. Without it your atomized fuel will puddle on the intake floor and run like crap. __________________ 292 + TKO500

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.