15x7 keystone raiders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

primetime · 07-17-2010, 11:32 AM

i have a set of keystone raider rims (that i thought were cragar SS) i want to put on my 77 short bed. when i tried i notice my studs are too short to put lug nuts on. can i knock these studs out and put longer ones on? or do i have to sell these rims and buy a new set? the inside of the rim says : MADE IN USA 15x7 JJ DOT INTERO 4 3 1992

flamingbig10 · 07-17-2010, 11:52 AM

you'll need different lug nuts like these
http://www.summitracing.com/parts/CRR-27723-4/

primetime · 07-17-2010, 10:51 PM

are the lug nuts going to fit through the rim to the studs? because the studs don't even reach past the rim to get a lug nut on it.

Chionos GMs · 07-17-2010, 11:10 PM

You can knock out the studs and put longer ones in. The way I did it was put a lug nut on and hit it with a 5 pound hammer that would break them loose and to put the new ones in I used an old rim and tightening the lug nuts would make the studs to seat in the holes. Or use a lug nut and a washer to seat them
http://www.ehow.com/video_2328000_re...eel-studs.html

07-17-2010, 11:32 AM	#1
primetime Registered User Join Date: Jul 2006 Location: Columbia, SC Posts: 410	15x7 keystone raiders i have a set of keystone raider rims (that i thought were cragar SS) i want to put on my 77 short bed. when i tried i notice my studs are too short to put lug nuts on. can i knock these studs out and put longer ones on? or do i have to sell these rims and buy a new set? the inside of the rim says : MADE IN USA 15x7 JJ DOT INTERO 4 3 1992 __________________ 1968 Chevy C10 swb fleetside 2005 Chevy Silverado crew cab (SS) 1977 Goldwing cafe racer 1977 Chevy nova (first car/ first love)

07-17-2010, 11:52 AM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: 15x7 keystone raiders you'll need different lug nuts like these http://www.summitracing.com/parts/CRR-27723-4/ __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

07-17-2010, 10:51 PM	#3
primetime Registered User Join Date: Jul 2006 Location: Columbia, SC Posts: 410	Re: 15x7 keystone raiders are the lug nuts going to fit through the rim to the studs? because the studs don't even reach past the rim to get a lug nut on it. __________________ 1968 Chevy C10 swb fleetside 2005 Chevy Silverado crew cab (SS) 1977 Goldwing cafe racer 1977 Chevy nova (first car/ first love)

07-17-2010, 11:10 PM	#4
Chionos GMs Registered User Join Date: Jun 2010 Location: Farmington,CA Posts: 345	Re: 15x7 keystone raiders You can knock out the studs and put longer ones in. The way I did it was put a lug nut on and hit it with a 5 pound hammer that would break them loose and to put the new ones in I used an old rim and tightening the lug nuts would make the studs to seat in the holes. Or use a lug nut and a washer to seat them http://www.ehow.com/video_2328000_re...eel-studs.html __________________ My last name is Chiono pronounced key-ono even if my grammar teacher told me Ch dont make a K sound 1995 Ext. cab 350 4wd dd 260,*** miles 1986 1/2 ton swb 305 2wd (melted bearings) SOLD!! 1982 3/4 lwb 6.2 diesel 2wd 1962 Chevy 283 4 speed long step 2wd 2 OWNER GONE!! Last edited by Chionos GMs; 07-17-2010 at 11:14 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.