|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
07-18-2010, 07:25 PM
|
#1 |
|
Registered User
 Join Date: Jul 2010
Location: Clovis, CA
Posts: 33
|
Rockers dont seem to sit right, any ideas?
I just had front floors and rockers installed in my 71 Jimmy and they seem to be too far in and up a bit. with doors adjusted all the way in, they are still not flush with rockers. I feel they are installed correctly. Please look at the pics and tell me what you think.
|
|
|
|
07-18-2010, 08:12 PM
|
#2 |
|
Registered User
Join Date: Aug 2006
Location: LaSalle Mi
Posts: 525
|
Re: Rockers dont seem to sit right, any ideas?
Rocker seems fine. Looks even with the quarter. Alos looks like the door is sticking out past the quarter.
|
|
|
|
|
07-18-2010, 08:15 PM
|
#3 |
|
Registered User
Join Date: May 2007
Location: San Antonio
Posts: 993
|
Re: Rockers dont seem to sit right, any ideas?
Did you have them done with the top on or off? Was the cab braced? You might need to shim a couple of panels.
|
|
|
|
|
07-18-2010, 09:31 PM
|
#4 |
|
I'm a poor spectator
Join Date: Aug 2006
Location: San Antonio, Tx
Posts: 2,287
|
Re: Rockers dont seem to sit right, any ideas?
Doesn't seem right to me, I can see where it's sunk in, who did it?
__________________
2006 Jeep Unlimited IMPACT ORANGE 1993 Chevy 2500 4x4 ExCab LWB 454/NV4500 Tow rig  1977 Ford F100 2x4 LWB 1st truck I owned, still have it!!!  1979 Ford F150 4x4 SWB Built Ford Tough!!!  1971 Chevy Blazer 350 / SM465 / NP205 UNDER CONSTRUCTION Soon to have a LQ4 6.0!!! |
|
|
|
|
07-18-2010, 10:03 PM
|
#5 |
|
Registered User
Join Date: Jul 2010
Location: Clovis, CA
Posts: 33
|
Re: Rockers dont seem to sit right, any ideas?
Top was on. cab was not braced because top was on. rockers line-up everywhere else. I have adjusted the doors more since these pics and the fit is better, but still bottoms of the doors stick-out about 1/4 inch past rockers. The one pic that shows the front fender way out is partly because the fender bolt is not installed in that side yet.
|
|
|
|
|
07-18-2010, 11:18 PM
|
#6 |
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Re: Rockers dont seem to sit right, any ideas?
Yeah this pic is the one that caught my eye. You say the fender isn't bolted down yet, I would go and install it at least temporarily and see which 2 of the 3 components match up. As in the fender, rocker, and door. Personally I don't like to judge how something is by a door that could be out of adjustment from years or previous owners, but the rocker and the fender should at least line up pretty good.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com |
|
|
|
|
07-19-2010, 09:18 PM
|
#7 |
|
Registered User
Join Date: Jul 2010
Location: Clovis, CA
Posts: 33
|
Re: Rockers dont seem to sit right, any ideas?
Okay, more info. removed the fenders today and found out the A pillar patches are just welded OVER the old ones? Not cut out and replaced. How much of a difference will this make, I would think it is causing the fender to stick out farther than it should.
Last edited by shanekie; 07-19-2010 at 09:27 PM. |
|
|
|
|
07-19-2010, 02:16 AM
|
#8 |
|
Registered User
Join Date: May 2007
Location: texas
Posts: 329
|
Re: Rockers dont seem to sit right, any ideas?
I almost hate to tell you guys, but when they built these truck. They were just that "trucks" And the fit of things on them was terrible to say the least. I was their when they backed mine off the truck, and spent three days adjusting doors, hood, and hatch. And before you ask, why I didn't make the dealer do it. It's because Jimmy's were new to the dealer, who's mechanics where what I call "sledge hammer mechanics" They only worked on big rigs. Most of you guys who have re-done yours, they are far, far more perfect than they ever were when new.
|
|
|
|
|
07-19-2010, 07:46 AM
|
#9 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
Re: Rockers dont seem to sit right, any ideas?
thats why a lot of guys slice the front and put a filler in to make that right, I'll try and find a link
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa |
|
|
|
|
07-19-2010, 07:48 AM
|
#10 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
Re: Rockers dont seem to sit right, any ideas?
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa |
|
|
|
|
07-19-2010, 10:15 PM
|
#11 |
|
Big Block
Join Date: Mar 2005
Location: Durham, N.C.
Posts: 1,649
|
Re: Rockers dont seem to sit right, any ideas?
Mine looks just like yours. I will have to replace mine again. The guy I bought mine from didn't brace the body and I don't think the top was on. My doors stickout at least 1" past the front of the rocker. They line up with the rear just fine. But both of them go in at the front. I will get pictures tomorrow.
|
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
