Door stop bracket

[brew8]

Anyone know of a vendor that sells the door frame bracket for the door stops for a 63 truck, I checked the usual suspects and no luck, the pick and pull here only has the 64 or later cabs, Thanks in advance. Larry

[forestb]

I think I got mine from ether Classic Industries or LMC. But I might be thinking of the wrong part. Do you have a pic?

[brew8]

I'll look through the pic's tonight and post one it's the part that goes on the door frame not in the door, which is usually what they sell, more later, larry

[padresag]

is there a difference between 63-64
ron

truck and car shop part nbr. 60-02504 fits from 60-66

[brew8]

I looked at the pick and pull and the one's on the 65 up pickups they had there were differen't, I do not have a pic so I may need to post when I get home later this week, I included a pic of the door piece, the one I need is pinned to the end of this one, Larry

[padresag]

they are all the same. someone may have put something else on there. some jeep rear door ones work
one fits all
ron

[jonzcustomshop]

60-63 the bracket was screwed to the cab, 456 it is welded on.

[jonzcustomshop]

I don't know how far a drive whitehall is from you , but neill freman has a few 60-63 trucks in his yard.

[padresag]

the only difference then is the attachment to the pillar, but not to the stop mechanism itself
ron
If one needs the part the screws onto the pillar,I do have a cab that I am getting rid of this week that has them on, 62

[Rich 5150 69]

Not sure if the `63 is the same but I think it is, go here
http://67-72chevytrucks.com/vboard/s...ep+door+checks

[brew8]

I am in Butte this week so White Hall is across the hill, I'll look him up in the directory and see what he has, thanks, Larry

[brew8]

"If one needs the part the screws onto the pillar,I do have a cab that I am getting rid of this week that has them on, 62 "

I'll call Niel tomorrow when his yard is open, if he dosen't have them I'll shoot you a PM tomorrow, thanks for the offer, Larry

[markeb01]

I found an NOS pair on eBay. If the oem part number does you any good, here's a photo showing the items and the id tag. The original part number is 3773478. I do not believe these are being reproduced, only NOS or used.

[padresag]

By rondavid at 2010-09-27

these are the door checks from a 62
ron

[akqj9]

Where can I buy this door stop for my 1964 C10?

[forestb]

Originally Posted by akqj9

Where can I buy this door stop for my 1964 C10?

I think most of the big retailers sell them. Classic industries, LMC, Classic trucks of America and brothers.

I used a set of jeep cherokee door stops they work grate and have notches so you can keep them open at different positions. I will try to find the tread on it or you can do a search on here for jeep cherokee

[Llay R. Rac]

I bought a pair of aftermarket door checks, they were so weak that a small gust of wind would slam the door.
I found NOS ones, kinda pricey but they hold the door open even in strong winds.
next time i need door checks i will get the jeep ones, they sound like an improvement over originals and a lot cheaper price.

[forestb]

here is the link to the thread
http://67-72chevytrucks.com/vboard/s...d.php?t=446066

[LostMy65]

Originally Posted by forestb

here is the link to the thread
http://67-72chevytrucks.com/vboard/s...d.php?t=446066

On my list as another upgrade I want to do.

[The Rocknrod]

Originally Posted by LostMy65

On my list as another upgrade I want to do.

Ya me too.

[nsb29]

I got the front ones they have too indents and if you cut the rubber bumper in half the door will open as wide as originally

[rvrfoot]

Wow 22 for a door stop. Brothers , Car and truck shop.

[The Rocknrod]

Ya and theyre worth all of $5.

[jeff_wilson70]

https://www.classicparts.com/1960-63...ctinfo/18-480/

No idea on the quality.

[Blk63vette]

Hello
Does anyone know where to get door stop screws at?

Thanks
Pete