66 12 bolt rearend question

[dcmulisha]

Sorry if this has been answered somewhere but I could not find it. Can someone tell me what all year models came with a 12 bolt/6 lug rear end that will bolt directly to a 66?

[CVA59]

Hope this is of some help. If it's a rear coil truck, 71-72 5-lug housings are a direct swap. 67-70 6-lug housings are 1.5" narrower than 71-72 housings.

Try this link: http://67-72chevytrucks.com/vboard/s...=rear+end+swap

[jchav62]

63-70...

[dcmulisha]

Thanks!!! Hopefully this will prove the most easy/cost effective solution to my current highway issue. Another words I'm currently tached out when cruising at 55mph. Now I won't end up with something that will not fit.

[raycow]

63-64 housings have the panhard bar mount on the RH axle tube. You can use one of these with an aftermarket bar or fab a longer bar yourself. If you want to use a stock 63-64 bar you will need the 63-64 frame bracket too

Ray

[brawley]

sorry to but in , but are the 63-64 panhard frame brackets diffrent from the 65-66? if so what is the diffrence? thanks

[Captainfab]

I believe the '63-'64 bracket is pretty much at 90 degrees to the fame. The '65-'72's are at a bit of an angle with the shorter panhard bar that mounts to the upper right of the center section.

Originally Posted by brawley

sorry to but in , but are the 63-64 panhard frame brackets diffrent from the 65-66? if so what is the diffrence? thanks

And to the OP...thetruck 12 bolts were used from '63-'82. The '65-early '70 will be a direct fit to your '66 retaining the 6 hole wheel pattern.