The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-16-2010, 08:22 PM   #1
hsdropout
Registered User
 
Join Date: Oct 2010
Location: Placerville CA
Posts: 186
Removal of Stock Steering Column

Got everything stripped of to remove the cab but can't figure out how to get steering column out of box....or do I have to remove the box too?
Not sure how the steering wheel comes off either, wheel puller maybe???
Guess I need to get the factory assembly manual.
Any input is greatly appreciated.

Got the engine and tranny fitted up with crossmembers today and pull it back out. Hope to get cab off tomorrow. Probably have to start spending $ now.
Attached Images
  
hsdropout is offline   Reply With Quote
Old 10-16-2010, 11:54 PM   #2
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Removal of Stock Steering Column

Remove the steering wheel. unbolt from bottom of dash. Take of drag link and pitman arm from box. If equipped with three on the tree remove all that stuff. Unbolt from frame and slide box and steering column thru firewall from fire wall side.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 10-17-2010, 09:12 AM   #3
hsdropout
Registered User
 
Join Date: Oct 2010
Location: Placerville CA
Posts: 186
Re: Removal of Stock Steering Column

OK thanks. I get it...except I can't get the steering wheel off. I removed the horn cover, bolt and horn plate......is the wheel just supposed to slide up and off now?

Nice 4x4 you got going there, by the way........
hsdropout is offline   Reply With Quote
Old 10-17-2010, 09:30 AM   #4
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,733
Re: Removal of Stock Steering Column

You need a puller.
geezer#99 is offline   Reply With Quote
Old 10-17-2010, 11:48 AM   #5
hsdropout
Registered User
 
Join Date: Oct 2010
Location: Placerville CA
Posts: 186
Re: Removal of Stock Steering Column

thanks..........apparently I need a puller to get drag link and pitman arm off also??
things don't come apart to easily after 50+ years !
Attached Images
  
hsdropout is offline   Reply With Quote
Old 10-17-2010, 01:06 PM   #6
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Removal of Stock Steering Column

Sometimes you can use penetrating oil and apply a little heat and a pry bar between the frame and arm at the shaft and it will pop off. Oriellys, etc. will loan you a puller if you don't have one, I picked a variety up at estate sales over the years. Or looking at it, unbolt the box, put the nut back on the shaft flush with the end, push the box away from the frame until the arm hits the frame. Hit the end of the shaft pushing it and the box thru the frame pressing the arm off. Redneck millwrighting at its finest.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project

Last edited by OrrieG; 10-17-2010 at 01:09 PM.
OrrieG is offline   Reply With Quote
Old 10-17-2010, 05:08 PM   #7
63 & 64 Bowties
and a few others
 
Join Date: Jun 2007
Location: Blue Ridge Mountains of VA
Posts: 5,638
Re: Removal of Stock Steering Column

The steering wheel and front end joints are not meant to just slide off, even when they were new.
JMO, I'd invest in at least a cheap puller. You'll need them again in the future, trust me.
http://www.northerntool.com/shop/too...6127_200396127
....and
http://www.northerntool.com/shop/too...ct_13315_13315
__________________
Bill US Army Vet -193rd Infantry
BlueRidgeMuscleCars.com

“The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi
63 & 64 Bowties is offline   Reply With Quote
Old 10-17-2010, 06:15 PM   #8
hsdropout
Registered User
 
Join Date: Oct 2010
Location: Placerville CA
Posts: 186
Re: Removal of Stock Steering Column

got it.......the local auto zone has used ones that they sell you then you can return for your money back any time.....kind of a free rental system.
kudos to auto zone.

Got the cab off too............talk about backyard redneck engineering!!

now let's see who it's gonna be today...Raiders or 49ers.
Attached Images
   
hsdropout is offline   Reply With Quote
Old 10-17-2010, 10:59 PM   #9
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
Re: Removal of Stock Steering Column

Orrie, he's probably going to set the tv up in front of the cab in the patio and sit in the cab to watch the game Friday night. Like the drive in movies.

The "patio" was probably the carport before someone stuck that piece of lattice work up there. Looks like that if he put up a couple of sheets of vis-queen he could stay half way comfortable out there on sunshiny days.

Last edited by mr48chev; 10-17-2010 at 11:02 PM.
mr48chev is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:20 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com