76 chevy truck buckets, tach and more... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 11-20-2010, 12:22 AM

Parted out a truck and was wondering some fair market prices on this stuff. I know the tachs are usually from $75 and up. The drivers bucket may need a little foam work. And yes i got the floor brackets. These parts are all in decent useable condition, but not perfect. Any help on a fair price for this stuff is appreciated. Thanks, Eric

**too much stuff** · 11-20-2010, 12:26 AM

Seat pics.
The tach PC does have a burn, but i grabbed the harness for the tach and for the 4x4 indicator. One bracket on the drivers side bucket will need a tach weld i think. The seat belt covers will need a little work on the outers. Nothing major as everything is there.
Anything else i forgot??? Thanks, Eric

Jonboy · 11-20-2010, 02:04 AM

I would imagine the seats are worth at least $200, but that may be on the low side. Untested tach cluster $50-100 (the burned circuit board would make me leary). I paid $25 for a similar set of door panels. These are prices that I would pay and not bat an eye, but I am cheap, too.

bigblock73 · 11-20-2010, 06:42 AM

Seats are always iffy...you never know, and with bad foam and shipping them...it is hard to get much out of them unless you sell them local. I think Jon is pretty close, 200 for them with brackets...100-150 for the brackets alone if you split.

Door panels are cheap, especially if the trim is bad.

Tachs, again Jon is right...100 or so for an untested unit. Broken or damaged parts will bring it down. However, 77+ tachs like yours are the most desireable.

**too much stuff** · 11-20-2010, 10:15 AM

Thanks guys, how about the seat belts? Are they bucket seat specific?

Jonboy · 11-20-2010, 10:23 PM

I don't think those are. The later model belts had the whole belt encased in the plastic so they would stand straight up. Looks like those would not.

bigblock73 · 11-20-2010, 11:27 PM

I think the belts are bucket seat specific bacause they are straight, all the bench seat belts I have seen were curved/twisted and more flexible as opposed to rigid like those. Remember, they had to slide between the seat and back...straight ones I don't think would work well.

SRVBLUES64 · 01-07-2011, 11:11 PM

Im looking for a complete front brake set up on a 76 for my 66 and a power cly also cal2indy@comcast.net

11-20-2010, 12:22 AM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	76 chevy truck buckets, tach and more... Parted out a truck and was wondering some fair market prices on this stuff. I know the tachs are usually from $75 and up. The drivers bucket may need a little foam work. And yes i got the floor brackets. These parts are all in decent useable condition, but not perfect. Any help on a fair price for this stuff is appreciated. Thanks, Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-20-2010, 12:26 AM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 76 chevy truck buckets, tach and more... Seat pics. The tach PC does have a burn, but i grabbed the harness for the tach and for the 4x4 indicator. One bracket on the drivers side bucket will need a tach weld i think. The seat belt covers will need a little work on the outers. Nothing major as everything is there. Anything else i forgot??? Thanks, Eric Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-20-2010, 02:04 AM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 76 chevy truck buckets, tach and more... I would imagine the seats are worth at least $200, but that may be on the low side. Untested tach cluster $50-100 (the burned circuit board would make me leary). I paid $25 for a similar set of door panels. These are prices that I would pay and not bat an eye, but I am cheap, too. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-20-2010, 06:42 AM	#4
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: 76 chevy truck buckets, tach and more... Seats are always iffy...you never know, and with bad foam and shipping them...it is hard to get much out of them unless you sell them local. I think Jon is pretty close, 200 for them with brackets...100-150 for the brackets alone if you split. Door panels are cheap, especially if the trim is bad. Tachs, again Jon is right...100 or so for an untested unit. Broken or damaged parts will bring it down. However, 77+ tachs like yours are the most desireable. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

11-20-2010, 10:15 AM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: 76 chevy truck buckets, tach and more... Thanks guys, how about the seat belts? Are they bucket seat specific? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-20-2010, 10:23 PM	#6
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 76 chevy truck buckets, tach and more... I don't think those are. The later model belts had the whole belt encased in the plastic so they would stand straight up. Looks like those would not. __________________ 1974 Jimmy- 5.3/4L80e/NP241

11-20-2010, 11:27 PM	#7
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: 76 chevy truck buckets, tach and more... I think the belts are bucket seat specific bacause they are straight, all the bench seat belts I have seen were curved/twisted and more flexible as opposed to rigid like those. Remember, they had to slide between the seat and back...straight ones I don't think would work well. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

01-07-2011, 11:11 PM	#8
SRVBLUES64 Registered User Join Date: Nov 2009 Location: Noblesville, Indiana Posts: 430	Re: 76 chevy truck buckets, tach and more... Im looking for a complete front brake set up on a 76 for my 66 and a power cly also cal2indy@comcast.net

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.