|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
11-23-2010, 11:33 PM
|
#1 |
|
Registered User
Join Date: Oct 2009
Location: Mesa, AZ
Posts: 17
|
Power steering pump 64 230 inline 6
I'm puting power steering on the 64. It has a 230 inline 6. Will a set of brackets for a 75 and up 250 6 cylinder work to mount the pump?
Thanks... |
|
|
|
11-24-2010, 12:09 AM
|
#2 |
|
Senior Member
 
Join Date: Apr 2001
Location: Alexandria, MN
Posts: 1,462
|
Re: Power steering pump 64 230 inline 6
yup... but the 73-up used a long water pump that would require you to use the 250's pulleys too.....
--Mike
__________________
63 C20 2WD, 230/SM420/4.11 73K 68 C30 dump truck, 327,SM425,4.56 66K original 68 C10 2WD SWB Stepper, 250/3-tree/3.73 66K.... Wifes 68 Buick Skylark Custom Conv., 350/TH400/2.56 In our family since '79 69 GMC 1500 SWB 2WD, 350/TH350/3.73 posi... 70 K10 SWB 4X4 4-sp,ps, pb, tilt, buckets, console, sliding back window (Need AC parts) WIP 72 Chevy K20 4x4 350/350/205/4.56 donor 72 Vette 350/M21/3.70 posi, triple black and super fast 84 Olds Cutlass Brougham 350/2004r/4.11 was Dad's |
|
|
|
|
11-24-2010, 12:16 AM
|
#3 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,733
|
Re: Power steering pump 64 230 inline 6
If the donor brackets are from an integral head motor they won't fit.
|
|
|
|
11-24-2010, 12:37 AM
|
#4 |
|
Registered User
Join Date: Mar 2010
Location: thomastown mississippi
Posts: 1,261
|
Re: Power steering pump 64 230 inline 6
i just did what you want to do on a early 250 i put in a m715 jeep. i used the later brackets, water pump & pulleys but like geezer says the brackets don't fit. i cut them up & left the pump bracket on the pump but fabbed a new bracket from the head to reach the pump bracket & welded them together. i will take a pik for you & post it tomorrow.
andy |
|
|
|
|
11-24-2010, 07:38 PM
|
#5 |
|
Registered User
Join Date: Mar 2003
Location: San Francisco, CA USA
Posts: 2,454
|
Re: Power steering pump 64 230 inline 6
If you are having trouble finding brackets, look at 6 cylinder cars. PS was more common on those than on the trucks. As already mentioned, stay away from the integral heads.
Ray
__________________
Live more responsibly. Eat lower on the food chain. Eat vegetarians. |
|
|
|
|
11-26-2010, 12:43 PM
|
#6 |
|
Registered User
Join Date: Mar 2010
Location: thomastown mississippi
Posts: 1,261
|
Re: Power steering pump 64 230 inline 6
ok here are the piks of what i did. you can see i cut the mount in two, then bolted a piece of flat to the head then bridged the gap. i run the adjusting arm from the alternator mount below. ain't fell off yet!
andy  
Last edited by andyh1956; 11-26-2010 at 12:44 PM. Reason: wrong photo |
|
|
|
|
11-26-2010, 12:59 PM
|
#7 |
|
Registered User
Join Date: Mar 2003
Location: San Francisco, CA USA
Posts: 2,454
|
Re: Power steering pump 64 230 inline 6
Andy, that's not a bad setup at all.
Ray
__________________
Live more responsibly. Eat lower on the food chain. Eat vegetarians. |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
