Oregon Member's - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 03-06-2003, 09:41 PM

Who on this board is located in oregon or near GRANTS PASS ....I am sure this will come up it seem's to be going around!!!

70 Jimmy · 03-06-2003, 11:48 PM

I'm in Corvallis, just 45 min north of Eugene.

theo goebel · 03-07-2003, 01:24 AM

70 Jimmy: I was in corvallis this weekend( usually every other to see my girl friend and daughter) there was a recdent thread from Oregon members about meeting a Slotsky's, not sure if in Salem, although I noticed a deli by that name in Tualatin, just South of Portland before the I-5/205 merge! Do you know about this? I have a '67 stepside in Seattle and one registered in Portland. Would love to hook up with some Orygun members.......my Oregon truck is licensed as (teo's 67) I could not get theo, I guess somebody already had it, besides I get tired of telling every one what year the truck is! PS: there is a '68 long fleet CST i often see around Corvallis black top and brush painted OSU orange, I assume he is a beaver, if you know him or of him, please tell him to get a decent paint job on that rig

thanks for being on the board and communicating!

theo goebel

bouncytruck · 03-07-2003, 12:54 PM

I'm in the Seattle area now, but I'm from Coos Bay/North Bend (NB '87). I went to school in Corvallis. My parents are still in Coos Bay/North Bend. I'm down there a couple times a year - someday I'll take my Blazer so I can tear up the Dunes!

stllookn · 03-07-2003, 01:24 PM

I have a good friend in Corvallis (carpenter) that paints all this rigs ('62-'66 Chevs) with brushes and house paint! He is a champion of the minimalist lifestyle. I always get a kick out of his approach to hot rods and life.

71MoneyPit · 03-07-2003, 01:38 PM

im right next door in Medford

70 Jimmy · 03-07-2003, 02:00 PM

During the summer there is a weekly cruise in at the Schlotzky's deli in Salem on Lancaster Dr. right off the freeway. If my rig is ready this summer, I'll go there quite a bit. If it's not, not so often

Brad · 03-07-2003, 04:15 PM

I'm 30 min. west of Salem, but grew up in, and frequently visit Portland. I hope I never have to live there again!
I hope to be able to go to Schlotzkis this summer and meet a few more members.

FRENCHBLUE72 · 03-07-2003, 09:19 PM

Hey money pit are the action auto and the one next door to it any good for part's cave man here is about dry....Im looking for a 67-68 hood..

71MoneyPit · 03-08-2003, 12:42 AM

nope, action auto and u pull it aren't worth the damn, all they have is late model cars and trucks anymore. if you are looking for 67-72 chevy parts there is a place down in Phoenix-Talent called Jims Better Buys, he has about 10 of these trucks. some of them have good hoods I think......

71-longbed · 03-08-2003, 01:01 AM

im up in salem ..... nice and wet right now ...but thats the north west .....

peace

danho · 03-08-2003, 01:36 AM

I'm in Prineville now, but grew up in Medford. I hope to move back in a couple of years if my job will let me. I do visit there once a month or so though and as far as wrecking yards go Central Point Auto Wreckers has some stuff.
Dan.

*60apache4* · 03-08-2003, 01:56 PM

There is the Northwest Truckin Jamboree every summer in July. They moved it back to the truck museum in Brooks near Salem.

If you go to Central Point Auto Wrecking bring your waders. You also might try the junk yard just off I-5 near Wolf Creek, and there is another guy by the name of Jerry something that's at the GP swap meet every year.

Good luck.

Tom, Medford.

OregonLonghorn · 03-08-2003, 03:15 PM

Myrtle Creek, Just south of Roseburg.

GMC Jim · 03-08-2003, 06:10 PM

...east county......near Gresham

PloreOSU · 03-08-2003, 07:39 PM

Tigard (west Portland), but my truck spends most of its time in Gresham where my parents have a big enough garage to work on it in relative comfort. I'm short on free time right now so I've got tons of parts for the truck, but they're all in the bed not on it.

Hopefully I'll see some people at the cruise-ins this summer in Portland. I might be in my 75 Olds instead of the truck depending on how much work I get done on it.

Right now I wouldn't trust my truck to make it down I-5 safely. I had a bad experience with someone pulling out in front of me. All of the wheels wanted to lock if I put more than a slight pressure on the pedal. I ended up sliding it to a stop almost sideways. I've decided that discs all around are in order for this rig before I go cruising too much with it.

cheyenne10 · 03-09-2003, 02:20 AM

I am in Eugene/Springfield area. Sounds like we need to ron-de-vue in Salem at the deli this summer.

Bouncytruck; I was ahead of you a couple of years. NBHS 82. I always hate explaining where North Bend is too. I hope they don't rename the town Coos Bay- North Bend like they want.

Please check out my post of good project for sale.

http://67-72chevytrucks.com/vboard/s...threadid=43703

Its almost spring and time to shift gears!!

Email me with questions or howdy.

cheyenne10@msn.com

03-06-2003, 09:41 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Oregon Member's Who on this board is located in oregon or near GRANTS PASS ....I am sure this will come up it seem's to be going around!!! __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-06-2003, 11:48 PM	#2
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	I'm in Corvallis, just 45 min north of Eugene. __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

03-07-2003, 01:24 AM	#3
theo goebel Registered User Join Date: Feb 2002 Location: Seattle, WA USA 98168 Posts: 70	Oregon Member's 70 Jimmy: I was in corvallis this weekend( usually every other to see my girl friend and daughter) there was a recdent thread from Oregon members about meeting a Slotsky's, not sure if in Salem, although I noticed a deli by that name in Tualatin, just South of Portland before the I-5/205 merge! Do you know about this? I have a '67 stepside in Seattle and one registered in Portland. Would love to hook up with some Orygun members.......my Oregon truck is licensed as (teo's 67) I could not get theo, I guess somebody already had it, besides I get tired of telling every one what year the truck is! PS: there is a '68 long fleet CST i often see around Corvallis black top and brush painted OSU orange, I assume he is a beaver, if you know him or of him, please tell him to get a decent paint job on that rig thanks for being on the board and communicating! theo goebel __________________ StepSideRideRequired

03-07-2003, 12:54 PM	#4
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	I'm in the Seattle area now, but I'm from Coos Bay/North Bend (NB '87). I went to school in Corvallis. My parents are still in Coos Bay/North Bend. I'm down there a couple times a year - someday I'll take my Blazer so I can tear up the Dunes! __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

03-07-2003, 01:24 PM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	I have a good friend in Corvallis (carpenter) that paints all this rigs ('62-'66 Chevs) with brushes and house paint! He is a champion of the minimalist lifestyle. I always get a kick out of his approach to hot rods and life. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

03-07-2003, 01:38 PM	#6
71MoneyPit MPG...hmm..more like GPM Join Date: Sep 2002 Location: Medford, Oregon Posts: 339	im right next door in Medford __________________ (Looking for 67-72 shortwide or shortstep bed) 71 C-10, 500ci of tire shredding Caddy torque, th400, 12 bolt w/Powertrax Lock-Right. Bald Rear Tires 85 Toyota 4x4- 22r 4-banger, 5 speed, I can actually AFFORD to drive this one.

03-07-2003, 02:00 PM	#7
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	During the summer there is a weekly cruise in at the Schlotzky's deli in Salem on Lancaster Dr. right off the freeway. If my rig is ready this summer, I'll go there quite a bit. If it's not, not so often __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

03-07-2003, 04:15 PM	#8
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,672	I'm 30 min. west of Salem, but grew up in, and frequently visit Portland. I hope I never have to live there again! I hope to be able to go to Schlotzkis this summer and meet a few more members. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

03-07-2003, 09:19 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Hey money pit are the action auto and the one next door to it any good for part's cave man here is about dry....Im looking for a 67-68 hood.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-08-2003, 12:42 AM	#10
71MoneyPit MPG...hmm..more like GPM Join Date: Sep 2002 Location: Medford, Oregon Posts: 339	nope, action auto and u pull it aren't worth the damn, all they have is late model cars and trucks anymore. if you are looking for 67-72 chevy parts there is a place down in Phoenix-Talent called Jims Better Buys, he has about 10 of these trucks. some of them have good hoods I think...... __________________ (Looking for 67-72 shortwide or shortstep bed) 71 C-10, 500ci of tire shredding Caddy torque, th400, 12 bolt w/Powertrax Lock-Right. Bald Rear Tires 85 Toyota 4x4- 22r 4-banger, 5 speed, I can actually AFFORD to drive this one.

03-08-2003, 01:01 AM	#11
71-longbed Its Magically Delicious Join Date: Jan 2003 Location: oregon Posts: 2,398	salem im up in salem ..... nice and wet right now ...but thats the north west ..... peace __________________ 71 C10 LWB 350sbc -TH350 12 bolt 3.42 Posi Of all my favorite things to do, The utmost is to have a brew. My love grows for my foamy friend, with each thirst-quenching elbow bend. Beer so frosty, smooth, and cold it's paradise pure liquid gold. Yes beer means many things to me that's all for now cus I gotta pee.

03-08-2003, 01:36 AM	#12
danho Pesemistic Optimist Join Date: Dec 2002 Location: Prineville, Oregon Posts: 227	I'm in Prineville now, but grew up in Medford. I hope to move back in a couple of years if my job will let me. I do visit there once a month or so though and as far as wrecking yards go Central Point Auto Wreckers has some stuff. Dan.

03-08-2003, 01:56 PM	#13
60apache4 Account Suspended Join Date: Nov 2001 Location: Oregon Posts: 147	There is the Northwest Truckin Jamboree every summer in July. They moved it back to the truck museum in Brooks near Salem. If you go to Central Point Auto Wrecking bring your waders. You also might try the junk yard just off I-5 near Wolf Creek, and there is another guy by the name of Jerry something that's at the GP swap meet every year. Good luck. Tom, Medford.

03-08-2003, 03:15 PM	#14
OregonLonghorn Registered User Join Date: Feb 2003 Location: Myrtle Creek, Oregon Posts: 29	Myrtle Creek, Just south of Roseburg.

03-08-2003, 06:10 PM	#15
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	...east county......near Gresham __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).



Register or Log In To remove these advertisements.

03-08-2003, 07:39 PM	#16
PloreOSU Registered User Join Date: Jan 2003 Location: Portland, OR Posts: 42	Tigard (west Portland), but my truck spends most of its time in Gresham where my parents have a big enough garage to work on it in relative comfort. I'm short on free time right now so I've got tons of parts for the truck, but they're all in the bed not on it. Hopefully I'll see some people at the cruise-ins this summer in Portland. I might be in my 75 Olds instead of the truck depending on how much work I get done on it. Right now I wouldn't trust my truck to make it down I-5 safely. I had a bad experience with someone pulling out in front of me. All of the wheels wanted to lock if I put more than a slight pressure on the pedal. I ended up sliding it to a stop almost sideways. I've decided that discs all around are in order for this rig before I go cruising too much with it. __________________ 72 GMC, 2x4, LWB Fleet DONE: 2/3 drop, 17" rims, front end rebuild, front/rear sway bars Working on: old air AC, blazer tank, rear discs, 03 silverado seats.

03-09-2003, 02:20 AM	#17
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	NW guys I am in Eugene/Springfield area. Sounds like we need to ron-de-vue in Salem at the deli this summer. Bouncytruck; I was ahead of you a couple of years. NBHS 82. I always hate explaining where North Bend is too. I hope they don't rename the town Coos Bay- North Bend like they want. Please check out my post of good project for sale. http://67-72chevytrucks.com/vboard/s...threadid=43703 Its almost spring and time to shift gears!! Email me with questions or howdy. cheyenne10@msn.com __________________ Bob

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.