please can somebody help me this jack is getting heavy! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76k5-wesside · 03-08-2003, 08:51 AM

ok ive got a crane positioned,ive got a chain hooked to the motor,ive got everything diconected[i think]ive got a jack under the tranny pan with a piece of wood of equal size ive already diconnected the bolts that connect the tranny behind the dist.and the cross member is only bolted on one side loosely,the other has a jack stand what do i do next [what tranny and flywheel bolts?]

*racedvl* · 03-08-2003, 09:00 AM

I would dissconnect the torque conveter to flex plate bolts, (4) and then dissconnect the engine mounts, and start picking up the engine. Then you will find what you forgot to dissconnect. . .

Ryan Flowers · 03-08-2003, 10:38 AM

Go with what racedvl said.

If you have someone helping you, lay under the truck and have them slowly start lifting out the motor. You should be able to catch anything you forgot.

76k5-wesside · 03-08-2003, 11:11 AM

thanx a bunch guys-um-arent you supposed to take the weight off the engine mounts before you unbolt them

*racedvl* · 03-08-2003, 06:56 PM

No, you should be able to get the apart without jacking it up. The weight doesn't actually sit on the bolts.

*1FaastC10* · 03-08-2003, 07:02 PM

i agree with what racedvl said, with one exception... not 4 bolts, should only be 3, possibly 6 though if your truck is a 3/4 or 1 ton. dont forget the belhousing bolts, there should be 6 of them as well.

03-08-2003, 08:51 AM	#1
76k5-wesside Registered User Join Date: Mar 2003 Posts: 6	please can somebody help me this jack is getting heavy! ok ive got a crane positioned,ive got a chain hooked to the motor,ive got everything diconected[i think]ive got a jack under the tranny pan with a piece of wood of equal size ive already diconnected the bolts that connect the tranny behind the dist.and the cross member is only bolted on one side loosely,the other has a jack stand what do i do next [what tranny and flywheel bolts?]

03-08-2003, 10:38 AM	#3
Ryan Flowers No Brakes Club Join Date: Jan 2003 Location: Carthage, N.C. Posts: 263	Go with what racedvl said. If you have someone helping you, lay under the truck and have them slowly start lifting out the motor. You should be able to catch anything you forgot. __________________ Ryan Flowers 85 GMC Suburban 4x4 379 90 GMC Suburban 4x4 383 01 Chevy Suburban 2x4 350 Click here to email me Click here to visit my web site

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-08-2003, 09:00 AM	#2
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	I would dissconnect the torque conveter to flex plate bolts, (4) and then dissconnect the engine mounts, and start picking up the engine. Then you will find what you forgot to dissconnect. . .

03-08-2003, 11:11 AM	#4
76k5-wesside Registered User Join Date: Mar 2003 Posts: 6	thanx a bunch guys-um-arent you supposed to take the weight off the engine mounts before you unbolt them

03-08-2003, 06:56 PM	#5
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	No, you should be able to get the apart without jacking it up. The weight doesn't actually sit on the bolts.

03-08-2003, 07:02 PM	#6
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	i agree with what racedvl said, with one exception... not 4 bolts, should only be 3, possibly 6 though if your truck is a 3/4 or 1 ton. dont forget the belhousing bolts, there should be 6 of them as well.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.