S10 Swappers - Rear axle drop question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thadious · 01-10-2011, 09:59 PM

Does anyone know, or have used, a set of leafs from another vehicle that will net you a 3-4 drop in the rear, on an S10 frame? I've got 2" blocks in mine and still want to come down another inch or two in the rear and 2 in the front.

I know F**d Ranger leafs sit pretty flat, not sure on the spring distance though...

Anyone?

Cheers,
Ted.

BlueJeep · 01-10-2011, 11:02 PM

You'll want to confirm this, but I think I read where s10 blazer springs on a pickup nets a couple inches of drop.

RootBeer 6117 · 01-11-2011, 12:09 AM

How about the S10 ZQ8/ Extreme springs? not sure of the total drop but I do know it is lower than the stock springs.

xpickup · 01-11-2011, 07:41 AM

Thadious I used drop leafs from Summit on the truck I am building. I think they are 3 inch drop and were a little over $200.

RootBeer 6117 · 01-11-2011, 07:57 PM

Ted
Kansas City and St Louis both have places that will de arch or re arch leaf springs. I used to buy from one called american spring. I rebuilt and beefed up leaf springs on work vans for a local company. I know you are a bit to the north but there might be a place that could help you out.

Thadious · 01-11-2011, 09:21 PM

Was thinking the same thing myself... we have a place here that forms springs as well...

Was just hoping that there was something out there that had them stock and I could look up on my local Kijiji....

Cheers,
Ted.

Dan Bowles · 01-11-2011, 09:41 PM

There is a whole write up on re-arch vs new in either Street Rodder or R&C. In the end, they said go with NEW to get the right set.

RootBeer 6117 · 01-12-2011, 09:44 AM

Ted this site has a lot of info/ dimensions that might help you out.

http://www.generalspringkc.com/index.php

rollinrooster · 01-12-2011, 01:21 PM

This is my '49 sitting on an s-10 frame with the factory springs without the overrides and 2" blocks. This set up lowered my rear suspension about 4".

1952ssr · 01-12-2011, 02:01 PM

I have taken out the second spring from the top along with two inch blocks. I have done this to many of the S vehicles I owned and lowered. This seems to give a really nice ride.

james843 · 04-14-2011, 08:34 AM

y not get a 4 inch angle block and a bolt in fram noch

Dan Bowles · 04-14-2011, 10:16 AM

I put 3" blocks in the back of my son's 54/S10. Sits about 8 1/2" to the running board on the rear.

01-10-2011, 09:59 PM	#1
Thadious Registered User Join Date: Sep 2008 Location: Creston, BC Canada Posts: 369	S10 Swappers - Rear axle drop question... Does anyone know, or have used, a set of leafs from another vehicle that will net you a 3-4 drop in the rear, on an S10 frame? I've got 2" blocks in mine and still want to come down another inch or two in the rear and 2 in the front. I know F**d Ranger leafs sit pretty flat, not sure on the spring distance though... Anyone? Cheers, Ted. __________________ '51 Chevy Build - In the design stages Aut viam inveniam aut faciam - I will either find a way or make one. If you don't have time to do it right the first time, when will you... My new build - https://67-72chevytrucks.com/vboard/...70#post8958970

01-10-2011, 11:02 PM	#2
BlueJeep Registered User Join Date: Mar 2008 Location: Waukee, Iowa Posts: 1,608	Re: S10 Swappers - Rear axle drop question... You'll want to confirm this, but I think I read where s10 blazer springs on a pickup nets a couple inches of drop. __________________ build threads: 86 Suburban 88 Jeep 6.0 swap 49 Chevy truck 54 Chevy wagon 86 Suburban lowered 4/6 54 Chevy wagon 49 Chevy/s10 mix 88 Jeep Wrangler rockcrawler

01-11-2011, 12:09 AM	#3
RootBeer 6117 Registered User Join Date: Jul 2010 Location: Columbia Mo Posts: 395	Re: S10 Swappers - Rear axle drop question... How about the S10 ZQ8/ Extreme springs? not sure of the total drop but I do know it is lower than the stock springs. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=413926 http://youtu.be/Qe9xJUhWkWc

01-11-2011, 07:41 AM	#4
xpickup Registered User Join Date: Jan 2007 Location: York, Pa. Posts: 1,386	Re: S10 Swappers - Rear axle drop question... Thadious I used drop leafs from Summit on the truck I am building. I think they are 3 inch drop and were a little over $200.

01-11-2011, 07:57 PM	#5
RootBeer 6117 Registered User Join Date: Jul 2010 Location: Columbia Mo Posts: 395	Re: S10 Swappers - Rear axle drop question... Ted Kansas City and St Louis both have places that will de arch or re arch leaf springs. I used to buy from one called american spring. I rebuilt and beefed up leaf springs on work vans for a local company. I know you are a bit to the north but there might be a place that could help you out. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=413926 http://youtu.be/Qe9xJUhWkWc

01-11-2011, 09:21 PM	#6
Thadious Registered User Join Date: Sep 2008 Location: Creston, BC Canada Posts: 369	Re: S10 Swappers - Rear axle drop question... Was thinking the same thing myself... we have a place here that forms springs as well... Was just hoping that there was something out there that had them stock and I could look up on my local Kijiji.... Cheers, Ted. __________________ '51 Chevy Build - In the design stages Aut viam inveniam aut faciam - I will either find a way or make one. If you don't have time to do it right the first time, when will you... My new build - https://67-72chevytrucks.com/vboard/...70#post8958970

01-11-2011, 09:41 PM	#7
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: S10 Swappers - Rear axle drop question... There is a whole write up on re-arch vs new in either Street Rodder or R&C. In the end, they said go with NEW to get the right set.

01-12-2011, 09:44 AM	#8
RootBeer 6117 Registered User Join Date: Jul 2010 Location: Columbia Mo Posts: 395	Re: S10 Swappers - Rear axle drop question... Ted this site has a lot of info/ dimensions that might help you out. http://www.generalspringkc.com/index.php __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=413926 http://youtu.be/Qe9xJUhWkWc Last edited by RootBeer 6117; 01-12-2011 at 02:19 PM.

01-12-2011, 01:21 PM	#9
rollinrooster Registered User Join Date: Apr 2010 Location: Morristown TN. Posts: 355	Re: S10 Swappers - Rear axle drop question... This is my '49 sitting on an s-10 frame with the factory springs without the overrides and 2" blocks. This set up lowered my rear suspension about 4". Attached Images

01-12-2011, 02:01 PM	#10
1952ssr Registered User Join Date: Nov 2009 Location: Gainesville Georgia Posts: 458	Re: S10 Swappers - Rear axle drop question... I have taken out the second spring from the top along with two inch blocks. I have done this to many of the S vehicles I owned and lowered. This seems to give a really nice ride. Attached Images

04-14-2011, 08:34 AM	#11
james843 Registered User Join Date: May 2010 Location: carrollton (atl)GA Posts: 45	Re: S10 Swappers - Rear axle drop question... y not get a 4 inch angle block and a bolt in fram noch

04-14-2011, 10:16 AM	#12
Dan Bowles AD Addict Join Date: Oct 2009 Location: Blissfield, MI Posts: 822	Re: S10 Swappers - Rear axle drop question... I put 3" blocks in the back of my son's 54/S10. Sits about 8 1/2" to the running board on the rear.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.