Inverted Flare Adapter...? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 01-12-2011, 09:20 PM

Alright guys, this is turning out to be a pain in the a$$. My truck is a 67..

i swapped to 73+ brakes (rotors, calipers, and brake hoses). both 73 hoses fit the passenger side stock hard brake line..but neither one fits the driver side. the driver side hole is bigger than the passenger side. so...

lolife99 pointed out that i will need an inverted flare adapter to make the 73 hose fit the stock driver side hard line. well, after going to my local ACE, o'reilly, autozone, 18 wheeler hydraulic line store...NONE of them have it (dont think they know what it is to be honest). SO, i figure i will just have to order it off the net.

so question #1 is, where can buy this thing online?
question #2, what is the size of the adapter i need?

im sure this will help out anyone else, because you NEED this if your keeping your hardlines and getting 73 hoses.

cparman · 01-12-2011, 09:54 PM

Lolife is correct. There are two different size flare nuts that will accept a 3/16 line. I would think they might be hard to get locally. I might suggest a trip to the local boneyard, and look for a 73 truck. see if you can find a truck that has the different sized nuts. cut the lines, and take home what you need. clean up the nuts and flare your own line?

**lolife99** · 01-12-2011, 10:20 PM

Male inverted x female inverted flare adapter.
I wish I could tell you which size I used.
These things are a quick fix that don't require you to re-flare your steel line
I just took my hose in the store and got the one that fit.

This place sells them.
http://www.fastfittings.com/master-cylinder-adapters

**kev2809** · 01-12-2011, 10:26 PM

hey, there you are..lol

man, i got the run arounds looking for this thing. nobody knew what the hell i was talking about.

so i need this one?

thats the pic they show for male inverted and female inverted. i will gladly just order from them, now i just need to find the right size.

**lolife99** · 01-12-2011, 10:39 PM

Yes.
The male end will screw into the hose,... the steel line will screw into the female end.

It may not look exactly like that picture,... unless the steel line is bigger than the hose fitting.

**kev2809** · 01-13-2011, 07:14 AM

ah ok i get what ur saying.

can anyone chime in on the size i need? or maybe lowes carries the same threaded bolts? i will try that when i get off work.
Posted via Mobile Device

cdowns · 01-13-2011, 12:35 PM

speedway motors has about any type brake fitting you'd need thier catalogues are free

**lolife99** · 01-13-2011, 03:11 PM

Quote:

Originally Posted by cdowns

speedway motors has about any type brake fitting you'd need thier catalogues are free

Yep. I forgot about them.
http://www.speedwaymotors.com/Produc...-3183&deptId=0

Available in the following sizes.
3/8"-24 IFM to 7/16" - 24 IFF
7/16"-24 IFM to 3/8" - 24 IFF
1/2"-20 IFM to 3/8" - 24 IFF
9/16"-18 IFM to 3/8" - 24 IFF

**kev2809** · 01-13-2011, 08:33 PM

just got back from lowes...i used the little bolt thing that have to match up the sizes and i got..

3/8-24
7/16-20

i didnt see this combo on either site..i dont see how/why one would be different thread size than the other.

but i would like to add the 3/8 one screwed all the way on, the 7/16 went about half way..

so im guessing i need this one..

3/8"-24 IFM to 7/16" - 24 IFF

does this look right?

**kev2809** · 01-14-2011, 12:16 PM

well, i went ahead and ordered the one above ..i should get it in Tuesday.
Posted via Mobile Device

**lolife99** · 01-14-2011, 12:25 PM

Let us know what you find out.

**kev2809** · 01-15-2011, 06:06 PM

will do, sure hope this solves my problem

**kev2809** · 01-18-2011, 08:47 PM

looks like its gonna work out...i didnt have a whole lot of time to mess with it, so i temporarily put it in for now. screws right into the original steel line about half way, so i hand tightened it. then hand tightened the brake hose into it. ill tighten it up tomorrow to make sure. ill also put up a pic of it installed, although its pretty self explanatory lol

sooo...for you guys trying to use stock steel lines (at least with a 67) you will need this adapter if your upgrading to 73 hoses and brakes..

3/8-24 IFM, 7/16-24 IFF

got mine from speedwaymotors.com..$5.99 plus $9 to ship (yes i know..ridiculous, why not put it in a regular envelope lol)

*Alarmed* · 10-05-2012, 12:29 AM

I am finding out that someone somewhere on this board has run into almost ever conceivable issue I have so far. I am running into a similar problem using 72 model calipers & hoses onto my stock 68 model hard lines. Are these the fittings I need to use for my conversion or is mine a totally different size again?? Thanks in advance!

**lolife99** · 10-05-2012, 07:49 AM

Quote:

Originally Posted by Alarmed

I am finding out that someone somewhere on this board has run into almost ever conceivable issue I have so far. I am running into a similar problem using 72 model calipers & hoses onto my stock 68 model hard lines. Are these the fittings I need to use for my conversion or is mine a totally different size again?? Thanks in advance!

Are you talking about where the rubber hose connects to the steel line on the crossmember?

*Alarmed* · 10-05-2012, 10:26 AM

Yes, where it connects to the steel line.

*Alarmed* · 10-05-2012, 12:32 PM

Woohoo, Success! Found it locally & it was only $3.88.

01-12-2011, 10:20 PM	#3
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Inverted Flare Adapter...? Male inverted x female inverted flare adapter. I wish I could tell you which size I used. These things are a quick fix that don't require you to re-flare your steel line I just took my hose in the store and got the one that fit. This place sells them. http://www.fastfittings.com/master-cylinder-adapters __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-12-2011, 10:26 PM	#4
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Inverted Flare Adapter...? hey, there you are..lol man, i got the run arounds looking for this thing. nobody knew what the hell i was talking about. so i need this one? thats the pic they show for male inverted and female inverted. i will gladly just order from them, now i just need to find the right size. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-12-2011, 10:39 PM	#5
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Inverted Flare Adapter...? Yes. The male end will screw into the hose,... the steel line will screw into the female end. It may not look exactly like that picture,... unless the steel line is bigger than the hose fitting. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-13-2011, 07:14 AM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Inverted Flare Adapter...? ah ok i get what ur saying. can anyone chime in on the size i need? or maybe lowes carries the same threaded bolts? i will try that when i get off work. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-13-2011, 12:35 PM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Inverted Flare Adapter...? speedway motors has about any type brake fitting you'd need thier catalogues are free __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-12-2011, 09:20 PM	#1
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Inverted Flare Adapter...? Alright guys, this is turning out to be a pain in the a$$. My truck is a 67.. i swapped to 73+ brakes (rotors, calipers, and brake hoses). both 73 hoses fit the passenger side stock hard brake line..but neither one fits the driver side. the driver side hole is bigger than the passenger side. so... lolife99 pointed out that i will need an inverted flare adapter to make the 73 hose fit the stock driver side hard line. well, after going to my local ACE, o'reilly, autozone, 18 wheeler hydraulic line store...NONE of them have it (dont think they know what it is to be honest). SO, i figure i will just have to order it off the net. so question #1 is, where can buy this thing online? question #2, what is the size of the adapter i need? im sure this will help out anyone else, because you NEED this if your keeping your hardlines and getting 73 hoses. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-12-2011, 09:54 PM	#2
cparman sharp as a marble Join Date: Jan 2007 Location: atlantic beach,florida Posts: 1,082	Re: Inverted Flare Adapter...? Lolife is correct. There are two different size flare nuts that will accept a 3/16 line. I would think they might be hard to get locally. I might suggest a trip to the local boneyard, and look for a 73 truck. see if you can find a truck that has the different sized nuts. cut the lines, and take home what you need. clean up the nuts and flare your own line?

01-13-2011, 08:33 PM	#9
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Inverted Flare Adapter...? just got back from lowes...i used the little bolt thing that have to match up the sizes and i got.. 3/8-24 7/16-20 i didnt see this combo on either site..i dont see how/why one would be different thread size than the other. but i would like to add the 3/8 one screwed all the way on, the 7/16 went about half way.. so im guessing i need this one.. 3/8"-24 IFM to 7/16" - 24 IFF does this look right? __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-13-2011 at 09:18 PM.

01-14-2011, 12:16 PM	#10
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Inverted Flare Adapter...? well, i went ahead and ordered the one above ..i should get it in Tuesday. Posted via Mobile Device __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-14-2011, 12:25 PM	#11
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Inverted Flare Adapter...? Let us know what you find out. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

01-15-2011, 06:06 PM	#12
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Inverted Flare Adapter...? will do, sure hope this solves my problem __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

01-18-2011, 08:47 PM	#13
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,176	Re: Inverted Flare Adapter...? looks like its gonna work out...i didnt have a whole lot of time to mess with it, so i temporarily put it in for now. screws right into the original steel line about half way, so i hand tightened it. then hand tightened the brake hose into it. ill tighten it up tomorrow to make sure. ill also put up a pic of it installed, although its pretty self explanatory lol sooo...for you guys trying to use stock steel lines (at least with a 67) you will need this adapter if your upgrading to 73 hoses and brakes.. 3/8-24 IFM, 7/16-24 IFF got mine from speedwaymotors.com..$5.99 plus $9 to ship (yes i know..ridiculous, why not put it in a regular envelope lol) __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 01-18-2011 at 08:49 PM.

10-05-2012, 12:29 AM	#14
Alarmed Account Suspended Join Date: Sep 2012 Location: Columbia, TN Posts: 33	Re: Inverted Flare Adapter...? I am finding out that someone somewhere on this board has run into almost ever conceivable issue I have so far. I am running into a similar problem using 72 model calipers & hoses onto my stock 68 model hard lines. Are these the fittings I need to use for my conversion or is mine a totally different size again?? Thanks in advance!

10-05-2012, 10:26 AM	#16
Alarmed Account Suspended Join Date: Sep 2012 Location: Columbia, TN Posts: 33	Re: Inverted Flare Adapter...? Yes, where it connects to the steel line.

10-05-2012, 12:32 PM	#17
Alarmed Account Suspended Join Date: Sep 2012 Location: Columbia, TN Posts: 33	Re: Inverted Flare Adapter...? Woohoo, Success! Found it locally & it was only $3.88.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.