Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-13-2011, 02:58 PM | #1 |
Registered User
Join Date: May 2007
Location: The Netherlands
Posts: 185
|
My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformance
Hi guys,
Found out that my '86 still has it's original 2.73 peg leg rear. I will be running 385/40 or 295/40R20's. Clearly the 2.74 is purely an economy gear and will have the 400 sbc lugging around. I want to keep economy and relative low highway RPMs in mind, but I do think something like a 3.42 would be way better for performance without hurting my fuel economy. What would you do, buy a complete used rear (sight unseen over internet) or swap ring and pinion?
__________________
1972 GMC 2500 Sierra 350 1971 Pontiac LeMans Sport 400 GTO/Judge Clone 1970 Pontiac GTO 400 convertible restoproject 1970 Pontiac Bonneville 455 convertible |
01-13-2011, 03:13 PM | #2 |
Slots go on anything!
Join Date: May 2003
Location: Richardson, TX
Posts: 5,957
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
I would swap to a 3.42 ring and pinion. Shipping would be a lot easier, and you would probably come out better in the long run.
__________________
1974 Jimmy- 5.3/4L80e/NP241 |
01-13-2011, 03:23 PM | #3 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,547
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
3.42 or 3.73
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
01-13-2011, 03:43 PM | #4 |
Chris
Join Date: Nov 2004
Location: Monaville, WV
Posts: 3,737
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
x2 at least 3.42 maybe as far as 4.10's if you have a tall tire since you'll have od, but really 3.73 would help give you fuel mileage. If you want more fuel mileage then power do 3.08.
__________________
Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 |
01-13-2011, 03:46 PM | #5 |
Registered User
Join Date: May 2009
Location: Motor City
Posts: 9,237
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
3.42 is usually my "default" setting.
By having an overdrive in this case, 3.73 might give you a bit more pep. K
__________________
Chevrolet Flint Assembly 1979-1986 GM Full Size Truck Engineering 1986 - 2019 Intro from an Old Assembly Guy: http://67-72chevytrucks.com/vboard/s...d.php?t=342926 My Pontiac story: http://forums.maxperformanceinc.com/...d.php?t=560524 Chevelle intro: http://www.superchevy.com/features/s...hevy-chevelle/ |
01-13-2011, 03:52 PM | #6 |
Registered User
Join Date: Jun 2004
Location: El Lago, TX
Posts: 1,668
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
I did this on my 76' Silverado. I went to Pick-a-Part and pulled one with 3.73's. It was like a different truck with 3.73's.
I thought this was easier and cheaper than swapping out the gears, however, since you are in The Netherlands having a complete rear end shipped to you might not be that easy. |
01-13-2011, 04:01 PM | #7 |
1962 C-10
Join Date: Apr 2005
Location: Las Vegas, New Mexico
Posts: 4,978
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
Since you have such a high gear ratio out back, just use Drive(3rd), and save the overdrive for that flats and downhills...
__________________
Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4 Last edited by jchav62; 01-13-2011 at 04:01 PM. |
01-13-2011, 04:25 PM | #8 |
Registered User
Join Date: May 2007
Location: The Netherlands
Posts: 185
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
Thanks for the response
I guess I'll be on the look for a 3.42 set. With gasprices right around $ 8,- a gallon around here I'm leaning a bit more towards better mileage than quicker acceleration. Might take the plunge and go for a posi at the same time. If I get the urge to play I can allways get in my '71 Pontiac and go
__________________
1972 GMC 2500 Sierra 350 1971 Pontiac LeMans Sport 400 GTO/Judge Clone 1970 Pontiac GTO 400 convertible restoproject 1970 Pontiac Bonneville 455 convertible |
01-13-2011, 04:27 PM | #9 |
Chris
Join Date: Nov 2004
Location: Monaville, WV
Posts: 3,737
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
yea you wouldn't need od with them gears but I would agree you need more pep for sure. I usually like alot taller gear for torque and take off and od helps out with rpm's.
__________________
Chris GIT R DONE!!!!!! Check out all our rides, http://www.cardomain.com/id/benwa454 |
01-13-2011, 05:26 PM | #10 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,547
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
is the truck you r play toy? do you live in the city, do you drive the highway alot?
If your playtoy, or you live in the city, then 3.73 is the way to go... If your DD or you drive the highway alot, then 3.42 would be best
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
01-13-2011, 10:08 PM | #11 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: My truck has a 400/700r4 and 2.74 rear..which rear to get for economy & peformanc
My experience has been with an OD transmission, a 3.42 is good for one MPG over a 3.73. The fun factor goes up considerably, but the 3.42 is a good compromise.
Keep in mind, you probably have a 3 series carrier, so a 3.73 won't fit unless you order a set specifically for the 3 series.
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|