LMC Cab Clearance Lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

TLoz · 01-18-2011, 02:39 PM

Has anyone had trouble with the LMC roof clearance lights. Mine have been on the burb for about 7 months and all are pitted and the chrome is lifting. Really bad looking. I did wax them after installation and I do drive it at least once a week on the nasty salt infested hoosier land roads, but I also wash it weekly. Thoughts about powder coating?

BLE 'BURBAN · 01-18-2011, 10:40 PM

Powder coating would make them look so much better Tom. And powder coating those 5 pieces shouldn't be any more than 80 - 100 bucks total.
Dave

TLoz · 01-19-2011, 08:13 AM

Yea, the only problem is going to be filling in the pits. Time for JB weld. I've never seen parts go south so fast. LMC won't do anything about them. Later, Tom

Mkcustums · 01-21-2011, 04:30 PM

That's ridiculous that the chrome would be that bad that fast.

If you decide to coat them they should be able to get it thick enough where you shouldn't see the pits. Also if you talk to the company, and you're not in a big hurry, have them run them through when they are doing the same color on another job, should cut your cost down quite a bit.

01-18-2011, 02:39 PM	#1
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	LMC Cab Clearance Lights Has anyone had trouble with the LMC roof clearance lights. Mine have been on the burb for about 7 months and all are pitted and the chrome is lifting. Really bad looking. I did wax them after installation and I do drive it at least once a week on the nasty salt infested hoosier land roads, but I also wash it weekly. Thoughts about powder coating?

01-18-2011, 10:40 PM	#2
BLE 'BURBAN In the Forgotten far North. Join Date: Jul 2007 Location: Anchorage, Alaska Posts: 2,627	Re: LMC Cab Clearance Lights Powder coating would make them look so much better Tom. And powder coating those 5 pieces shouldn't be any more than 80 - 100 bucks total. Dave __________________ 1987 R3500 CREW CAB DUALLY (BIG RED)Acquired 06/12/2015 1990 chevy suburban V2500 5.7L My cluster Mods-Nov 2007 overhead console Stereo install Round 2 Aug 2009 Heated/turn signal mirror upgrade

01-19-2011, 08:13 AM	#3
TLoz Registered User Join Date: Dec 2003 Location: Indy Posts: 326	Re: LMC Cab Clearance Lights Yea, the only problem is going to be filling in the pits. Time for JB weld. I've never seen parts go south so fast. LMC won't do anything about them. Later, Tom

01-21-2011, 04:30 PM	#4
Mkcustums Registered User Join Date: Oct 2007 Location: Wilsonville Or Posts: 705	Re: LMC Cab Clearance Lights That's ridiculous that the chrome would be that bad that fast. If you decide to coat them they should be able to get it thick enough where you shouldn't see the pits. Also if you talk to the company, and you're not in a big hurry, have them run them through when they are doing the same color on another job, should cut your cost down quite a bit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.