WIW: 67 dash repair w/keys and locks. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 02-06-2011, 04:38 PM

Parting out a 67 and will probably cut this center section of the dash for a repair panel. It is a 67 only with the ignition and matching door locks. Better to sell with the ign. or seperate? Values both ways? Thanks

*sharpie1972* · 02-06-2011, 05:05 PM

Hi Eric, seems to be big demand for 67 ignition pieces (spacer & bezel) if they are in good shape. Bonus to have the keys/ door locks. I would price the ignition pieces/keys/door locks @ $40-65 and the one year only dash section at $35-50. Do you have the 67 ash tray? Sharpie

**too much stuff** · 02-06-2011, 05:08 PM

Thanks, i think i have the ash tray here somewhere.

**Classic Bowties** · 02-07-2011, 12:37 PM

Sharpie's above numbers look spot on, also on the ign. switch itself if an oe 67-8 piece there will only be the off-on-start positions, no acc. position. In the past, I have been asked by a few real 67 "purist" for this type of switch. Mel

02-06-2011, 04:38 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	WIW: 67 dash repair w/keys and locks. Parting out a 67 and will probably cut this center section of the dash for a repair panel. It is a 67 only with the ignition and matching door locks. Better to sell with the ign. or seperate? Values both ways? Thanks Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-06-2011, 05:05 PM	#2
sharpie1972 Account Suspended Join Date: Apr 2007 Location: Powell, Wyoming Posts: 4,973	Re: WIW: 67 dash repair w/keys and locks. Hi Eric, seems to be big demand for 67 ignition pieces (spacer & bezel) if they are in good shape. Bonus to have the keys/ door locks. I would price the ignition pieces/keys/door locks @ $40-65 and the one year only dash section at $35-50. Do you have the 67 ash tray? Sharpie

02-06-2011, 05:08 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: WIW: 67 dash repair w/keys and locks. Thanks, i think i have the ash tray here somewhere. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

02-07-2011, 12:37 PM	#4
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,755	Re: WIW: 67 dash repair w/keys and locks. Sharpie's above numbers look spot on, also on the ign. switch itself if an oe 67-8 piece there will only be the off-on-start positions, no acc. position. In the past, I have been asked by a few real 67 "purist" for this type of switch. Mel

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.