Parking brake levers

[KVB]

I am working on my brakes, 1965 C10, stock six lug axles. I need the parking brake levers that go on this truck. Any suggestions as to where I can get a kit, or the seperate parts. There is the left and righ levers, as well as a pivot pin with a c-clip.

I am in the Montreal, Quebec area.

Thanks

Ken

[61_FL_Apache]

Your handle should be on the left of the column. I looked at LMC and didnt see anything.

[KVB]

Originally Posted by 61_FL_Apache

Your handle should be on the left of the column. I looked at LMC and didnt see anything.

The levers I am looking for, are inside the brake drum. Where the end of the cable hooks up to.

[kieth]

Originally Posted by KVB

I am working on my brakes, 1965 C10, stock six lug axles. I need the parking brake levers that go on this truck. Any suggestions as to where I can get a kit, or the seperate parts. There is the left and righ levers, as well as a pivot pin with a c-clip.

I am in the Montreal, Quebec area.

Thanks

Ken

Are you referring to the levers that mount on the frame ?

[jonzcustomshop]

give areotruk63 a pm, i think he is in your area too...
I remember him doing a post like this too, then I think he came up with some part #'s

[markeb01]

Here's the Aerotruk thread, it does include part numbers in post #9:

http://67-72chevytrucks.com/vboard/s...t=brake+levers

[KVB]

I have gone to GM with the parts numbers listed by Aerotruck63, they are in stock, 22.00$ a piece, and they cannot tell me if they include the pivot pin and the c-clip. I just thought someone would have gone through this before and could guide me to the best solution.

[aerotruk63]

They don't come with the c clips from GM, they do have the pins. We ordered a box of 100 clips from Papco removed two then sent the box back. Ask Jim or Rob,Were bad! I`d give a call to Fastenal in your area and check to see if they sell them individually. You can order from GM as well but at what cost. Princess Auto should sell a kit, then what do you do with the rest. Dorman, Moog, dosen`t sell the levers we looked at all our suppliers, nada. Norm 514-695-5795

I`ve seen guys use a self locking nut and bolt to hold the lever on, not original but it works.

[maxwoof]

Try these guys: http://www.obschevy.com/

They have them. Look in the brake section.

Spreaser bar can be had from LMC, or Dorman.

[KVB]

Aerotruk63 & maxwoof, thanks for the info and link. Seems like obsolete is the route to take. It comes as a kit and is less than the GM dealer.

Ken