Drop Spindles & B/S for wheels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djw32 · 03-03-2011, 01:27 AM

Guys,

I'm trying to figure out my wheel dilemma.

I would like to have all wheels and tires the same on my 70 Chevy (so I can rotate them). I plan on running 255/40/20 or 275/40/20.

Here is what I want to run:
2"(cpp forged) or 2 1/2" drop spindle(Mcgaughtys)
captainfab's camaro rear brake brakets

Is anyone running something similar to this?

Thanks for the help.

David

smashingchuck · 03-03-2011, 10:27 AM

I would go with the skinnier tire on an 8" wide wheel with 4 or 4.5 inches of back spacing.

djw32 · 03-03-2011, 02:24 PM

The wheel comes out to 8.5. I had a 94 Chevy with 275 on a 8" and it was fine.

03-03-2011, 01:27 AM	#1
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Drop Spindles & B/S for wheels Guys, I'm trying to figure out my wheel dilemma. I would like to have all wheels and tires the same on my 70 Chevy (so I can rotate them). I plan on running 255/40/20 or 275/40/20. Here is what I want to run: 2"(cpp forged) or 2 1/2" drop spindle(Mcgaughtys) captainfab's camaro rear brake brakets Is anyone running something similar to this? Thanks for the help. David

03-03-2011, 10:27 AM	#2
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Drop Spindles & B/S for wheels I would go with the skinnier tire on an 8" wide wheel with 4 or 4.5 inches of back spacing. __________________ 78 Build Thread 4Runner Build

03-03-2011, 02:24 PM	#3
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Drop Spindles & B/S for wheels The wheel comes out to 8.5. I had a 94 Chevy with 275 on a 8" and it was fine.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.