3 spd transmission suggestions? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mkschwall · 03-07-2011, 07:10 PM

I have two teeth missing in the counter gear in my Muncie 318 (4 bolt side cover) 3 spd transmission. This is the truck that my father drove to work every day, and I want to keep it stock (I learned how to drive on it in 1971). Chevy c-10 fleetside, engine 230 CI, 3 speed manual transmission, no overdrive. Any suggestions?

biohazardbill · 03-07-2011, 08:01 PM

Quote:

Originally Posted by mkschwall

I want to keep it stock

How about a "Muncie 318 (4 bolt side cover) 3 spd transmission"

k1rodeoboater · 03-07-2011, 08:08 PM

I was gonna say that or a BW T-85 3spd with overdrive

oldblue1968chevy · 03-07-2011, 10:37 PM

speedway sells a rebuilt 3 speed for around $400

andyh1956 · 03-08-2011, 01:59 AM

when i was in high school the welding teacher's old crash box in his '65 bit the dust. he bought a later sycro 3 spd from one of the machine shop students that got it from a wrecked nova. we were gonna swap it for him after school. when we saw it it wound up being a bw st10. he was gonna give it back cause he didn't want to hack up the floor for a new shifter (which didn't come with the trans) any way, one of the retired army guys that was going to school at night studied on it & came up with a solution. we installed the trans & he modified the linkage to fit the shift levers on the side & installed an electric solenoid on the reverse lever. you had to leave the shifter in n and then flip a switch for reverse to engage but it worked. that old 283 sure liked that column shift 4 spd!
andy

Blue72slab · 03-08-2011, 02:28 AM

These transmissions are pretty easy to work on. If you have the service manual it pretty much walks you through it. I would pull it apart and get the stuff you need to make it as good as new and you will save some money in the process.

03-07-2011, 07:10 PM	#1
mkschwall Registered User Join Date: Feb 2011 Location: Elk Grove California Posts: 3	3 spd transmission suggestions? I have two teeth missing in the counter gear in my Muncie 318 (4 bolt side cover) 3 spd transmission. This is the truck that my father drove to work every day, and I want to keep it stock (I learned how to drive on it in 1971). Chevy c-10 fleetside, engine 230 CI, 3 speed manual transmission, no overdrive. Any suggestions?

03-07-2011, 08:08 PM	#3
k1rodeoboater Registered User Join Date: Nov 2010 Location: Fayetteville NC Posts: 752	Re: 3 spd transmission suggestions? I was gonna say that or a BW T-85 3spd with overdrive __________________ 1966 C10 Long step build on a budget http://67-72chevytrucks.com/vboard/s...d.php?t=445201 no garage, no shop, limited storage space and tools....no problem.

03-07-2011, 10:37 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: 3 spd transmission suggestions? speedway sells a rebuilt 3 speed for around $400 __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

03-08-2011, 01:59 AM	#5
andyh1956 Registered User Join Date: Mar 2010 Location: thomastown mississippi Posts: 1,261	Re: 3 spd transmission suggestions? when i was in high school the welding teacher's old crash box in his '65 bit the dust. he bought a later sycro 3 spd from one of the machine shop students that got it from a wrecked nova. we were gonna swap it for him after school. when we saw it it wound up being a bw st10. he was gonna give it back cause he didn't want to hack up the floor for a new shifter (which didn't come with the trans) any way, one of the retired army guys that was going to school at night studied on it & came up with a solution. we installed the trans & he modified the linkage to fit the shift levers on the side & installed an electric solenoid on the reverse lever. you had to leave the shifter in n and then flip a switch for reverse to engage but it worked. that old 283 sure liked that column shift 4 spd! andy

03-08-2011, 02:28 AM	#6
Blue72slab Registered User Join Date: Aug 2009 Location: La Quinta, CA Posts: 72	Re: 3 spd transmission suggestions? These transmissions are pretty easy to work on. If you have the service manual it pretty much walks you through it. I would pull it apart and get the stuff you need to make it as good as new and you will save some money in the process. __________________ Larry 1972 Chevy C20 Custom Camper 1968 Chevy Camaro RS 1980 GMC K5 Sierra Classic

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.